Canon projector LV8215 User Manual
Have a look at the manual Canon projector LV8215 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 47
38
4. Convenient Features
Lamp Mode and Energy-Saving Effect
Selecting [Quiet] for Lamp mode will help you to reduce CO2 emissions from the projector.
The Lamp mode enables you to select two brightness modes of the lamp: Normal and Quiet modes. The lamp life
can be extended by using the Quiet mode.
Lamp Mode DescriptionStatus of LAMP indicator
Normal Mode T h i s i s t h e d e f a u l t s e t t i n g (10 0 %
Brightness). Off
Quiet ModeS e l e c t t h i s m o d e t o i n c r e a s e t h e...](http://img.usermanuals.tech/thumb/14/1299/w64_projector-lv8215-1478291101_d-46.png "Page 47
38
4. Convenient Features
Lamp Mode and Energy-Saving Effect
Selecting [Quiet] for Lamp mode will help you to reduce CO2 emissions from the projector.
The Lamp mode enables you to select two brightness modes of the lamp: Normal and Quiet modes. The lamp life
can be extended by using the Quiet mode.
Lamp Mode DescriptionStatus of LAMP indicator
Normal Mode T h i s i s t h e d e f a u l t s e t t i n g (10 0 %
Brightness). Off
Quiet ModeS e l e c t t h i s m o d e t o i n c r e a s e t h e...")
![Page 48
39
4. Convenient Features
Checking Energy-Saving Effect
This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector’s [Lamp
mode] is set to [Quiet]. This feature is called as [Carbon meter].
There are two messages: [Total carbon savings] and [Carbon savings-Session]. The [Total carbon savings] mes-
sage shows the total amount of CO
2 emission reduction from the time of shipment up to now. You can check the...](http://img.usermanuals.tech/thumb/14/1299/w64_projector-lv8215-1478291101_d-47.png "Page 48
39
4. Convenient Features
Checking Energy-Saving Effect
This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector’s [Lamp
mode] is set to [Quiet]. This feature is called as [Carbon meter].
There are two messages: [Total carbon savings] and [Carbon savings-Session]. The [Total carbon savings] mes-
sage shows the total amount of CO
2 emission reduction from the time of shipment up to now. You can check the...")
![Page 49
40
Preventing the Unauthorized Use of the Projector [Password]
A password can be set for your projector to avoid operation by an unauthorized user using the Menu. When a
password is set, turning on the projector will display the password input screen. Unless the correct password is
entered, the projector cannot project an image.
NOTE: The [Password] setting cannot be cancelled by using the [Reset] of the menu.
To enable the Password function:
1.
Press the MENU...](http://img.usermanuals.tech/thumb/14/1299/w64_projector-lv8215-1478291101_d-48.png "Page 49
40
Preventing the Unauthorized Use of the Projector [Password]
A password can be set for your projector to avoid operation by an unauthorized user using the Menu. When a
password is set, turning on the projector will display the password input screen. Unless the correct password is
entered, the projector cannot project an image.
NOTE: The [Password] setting cannot be cancelled by using the [Reset] of the menu.
To enable the Password function:
1.
Press the MENU...")
![Page 50
41
the [Confi rm password] screen will be displayed.
NOTE: Do not forget your password. If you forget your password, contact your dealer.
7. Type in the same combination of
buttons and press the OK button.
t he confi rmation screen will be displayed.
8. Select [Yes] and press the OK button.
t he Password function has been enabled.
To turn on the projector when Password is enabled:
1. Press the Main Power Switch to the On position (I).
2. Press and hold the POWER button for about 1 second....](http://img.usermanuals.tech/thumb/14/1299/w64_projector-lv8215-1478291101_d-49.png "Page 50
41
the [Confi rm password] screen will be displayed.
NOTE: Do not forget your password. If you forget your password, contact your dealer.
7. Type in the same combination of
buttons and press the OK button.
t he confi rmation screen will be displayed.
8. Select [Yes] and press the OK button.
t he Password function has been enabled.
To turn on the projector when Password is enabled:
1. Press the Main Power Switch to the On position (I).
2. Press and hold the POWER button for about 1 second....")
![Page 51
42
To disable the Password function:
1. Press the MENU button.
t he menu will be displayed.
2. Select [Setup]
→ [Installation]
→ [Password] and press the OK button.
t
he Off/On menu will be displayed.
3. Select [Off] and press the OK button.
t he Password Confi rmation screen will be displayed.
4. Type in your password and press the OK button.
When the correct password is entered, the Password function will be disabled.
NOTE: If you forget your password, contact your dealer.
4. Convenient...](http://img.usermanuals.tech/thumb/14/1299/w64_projector-lv8215-1478291101_d-50.png "Page 51
42
To disable the Password function:
1. Press the MENU button.
t he menu will be displayed.
2. Select [Setup]
→ [Installation]
→ [Password] and press the OK button.
t
he Off/On menu will be displayed.
3. Select [Off] and press the OK button.
t he Password Confi rmation screen will be displayed.
4. Type in your password and press the OK button.
When the correct password is entered, the Password function will be disabled.
NOTE: If you forget your password, contact your dealer.
4. Convenient...")
![Page 53
44
Network Settings
http:// /index.html
DHCP .................................. Enabling this option automatically assigns an IP address to the projector from your DHCP
server. Disabling this option allows you to register the IP address or subnet mask number
obtained from your network administrator.
NOTE: You can check the IP address in the menu when [ENABLE] is selected for [DHCP]. To do
so, from the menu, select [Information] → [Wired LAN].
IP ADDRESS ....................... Set your IP address of...](http://img.usermanuals.tech/thumb/14/1299/w64_projector-lv8215-1478291101_d-52.png "Page 53
44
Network Settings
http:// /index.html
DHCP .................................. Enabling this option automatically assigns an IP address to the projector from your DHCP
server. Disabling this option allows you to register the IP address or subnet mask number
obtained from your network administrator.
NOTE: You can check the IP address in the menu when [ENABLE] is selected for [DHCP]. To do
so, from the menu, select [Information] → [Wired LAN].
IP ADDRESS ....................... Set your IP address of...")
![Page 55
46
4. Convenient Features
List of Error Messages
Subject/BodyProjector status Message
Message subject At the time of sending test mail
[Projector] Test mail
At the time when error is found [Projector] Projector information
Message body Test mail
Alert mail configurations are as follows:
Model name:
Serial number:
Sender's address:
SMTP server name:
Recipient's address 1:
Recipient's address 2:
Recipient's address 3:
Lamp replacement Replace with the new lamp.
[Information]
Model name:...](http://img.usermanuals.tech/thumb/14/1299/w64_projector-lv8215-1478291101_d-54.png "Page 55
46
4. Convenient Features
List of Error Messages
Subject/BodyProjector status Message
Message subject At the time of sending test mail
[Projector] Test mail
At the time when error is found [Projector] Projector information
Message body Test mail
Alert mail configurations are as follows:
Model name:
Serial number:
Sender's address:
SMTP server name:
Recipient's address 1:
Recipient's address 2:
Recipient's address 3:
Lamp replacement Replace with the new lamp.
[Information]
Model name:...")
42 To disable the Password function: 1. Press the MENU button. t he menu will be displayed. 2. Select [Setup] → [Installation] → [Password] and press the OK button. t he Off/On menu will be displayed. 3. Select [Off] and press the OK button. t he Password Confi rmation screen will be displayed. 4. Type in your password and press the OK button. When the correct password is entered, the Password function will be disabled. NOTE: If you forget your password, contact your dealer. 4. Convenient Features
43 4. Convenient Features Network and Alert Mail Settings by Using an HTTP Browser Overview Connecting the projector to a network allows the projector to send an alert mail that informs the user that the lamp has reached the end of its life or an error has occurred. The IP address and subnet mask of the projector can be set on the Network Setting screen of the web browser by using an HTTP server function. Please be sure to use “Microsoft Internet Explorer 6.0” or a higher version for the web browser. (This device uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. The setting method will vary depending on the version of browser. Please refer to the help files and the other information provided in your software.) Access is gained to the HTTP server function by starting the Web browser on the computer via the network con- nected to the projector and enter the following URL. • Network Setting http:///index.html • Alert Mail Setting http:///lanconfig.html Example : Network Setting http://192.168.0.10/index.html Alert Mail Setting http://192.168.0.10/lanconfig.html TIP: The default IP address is “192.168.0.10”. NOTE: • If the PROJECTOR NETWORK SETTINGS screen does not appear in the web browser, press the Ctrl+F5 keys to refresh your web browser (or clear the cache). • The display’s or button’s response can be slowed down or operation may not be accepted depending the settings of your network. Should this happen, consult your network administrator. The projector may not respond if its buttons are repeatedly pressed in rapid intervals. Should this happen, wait a moment and repeat. If you still can’t get any response, turn off and back on the projector. Preparation Before Use Connect the projector to a commercially available LAN cable before engaging in browser operations. See page 22 . Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the setting method. Although the type of proxy server will be a factor, it is possible that items that have actually been set will not be displayed depending on the effectiveness of the cache, and the contents set from the browser may not be reflected in operation. It is recommended that a proxy server not be used unless it is unavoidable.
44 Network Settings http:// /index.html DHCP .................................. Enabling this option automatically assigns an IP address to the projector from your DHCP server. Disabling this option allows you to register the IP address or subnet mask number obtained from your network administrator. NOTE: You can check the IP address in the menu when [ENABLE] is selected for [DHCP]. To do so, from the menu, select [Information] → [Wired LAN]. IP ADDRESS ....................... Set your IP address of the network connected to the projector when [DISABLE] is selected for [DHCP]. NOTE: You can check your specified IP address in the menu. To do so, from the menu, select [Information] → [Wired LAN]. SUBNET MASK ................... Set your subnet mask number of the network connected to the projector when [DISABLE] is selected for [DHCP]. DEFAULT GATEWAY ...............Set your default gateway of the network connected to the projector when [DISABLE] is se- lected for [DHCP]. DNS (PRIMARY) ................ Set your primar y DNS settings of the network connected to the projector. DNS (SECONDARY) .................Set your secondar y DNS settings of the network connected to the projector. UPDAT E .............................. Reflect your settings. NOTE: Close the browser after clicking [UPDATE]. The projector will automatically update your settings. TIP: Selecting [Network settings] for [Reset] from the projector’s menu allows you to return the following items to the factory default. [DHCP]: DISABLE [IP ADDRESS]: 192.168.0.10 [SUBNET MASK]: 255.255.255.0 [DEFAULT GATEWAY]: 192.168.0.1 *[DNS(PRIMARY)] and [DNS(SECONDARY)] will remain unchanged. 4. Convenient Features
45 Alert Mail Setting http:// /lanconfig.html This option notifies your computer of an error message via e-mail when using wired LAN. An error message notification will be sent when the projector lamp has reached the end of its usable life or an error occurs in the projector. HOST NAME ............................ Type in the hostname of the network connected to the projector. Up to 60 alphanumeric characters can be used. If the host name is unknown, type in a string of characters repre- senting the projector. Example: Projector 1 DOMAIN NAME ....................... Type in the domain name of the network connected to the projector. Up to 60 alphanumeric characters can be used. If the domain name is unknown, type in the right side of @ in the sender's address. Example: canon.com ALERT MAIL ............................. Checking [ENABLE] will turn on the Aler t Mail feature. Checking [DISABLE] will turn off the Aler t Mail feature. SENDER’S ADDRESS ............... Type in the senders address. Up to 60 alphanumeric and symbols characters can be used. SMTP SERVER NAME .............. Type in the SMTP server name to be connected to the projector. Up to 60 alphanumeric characters can be used. RECIPIENT’S ADDRESS 1 to 3 ...Type in your recipient’s address. Up to 60 alphanumeric and symbols characters can be used. A P P LY ...................................... Click this button to reflect the above settings EXECUTE .................................. Click this button to send a test mail to check if your settings are correct. S TAT US .................................... A reply to a test mail will be displayed. N OTE: • If you execute a test, you may not receive an Alert mail. Should this happen, check if the network settings are correct. • If you entered an incorrect address in a test, you may not receive an Alert mail. Should this happen, check if the Recipient ’s Address is correct TIP: The Alert Mail settings will not be affected even when [Reset] is done from the menu. 4. Convenient Features
46 4. Convenient Features List of Error Messages Subject/BodyProjector status Message Message subject At the time of sending test mail [Projector] Test mail At the time when error is found [Projector] Projector information Message body Test mail Alert mail configurations are as follows: Model name: Serial number: Sender's address: SMTP server name: Recipient's address 1: Recipient's address 2: Recipient's address 3: Lamp replacement Replace with the new lamp. [Information] Model name: Serial number: Lamp counter: Filter cleaning Please clean filter. [Information] Model name: Serial number: Filter counter: Lamp counter: Lamp cover error The lamp cover is not installed properly. Check and re-attach it if necessary. [Information] Model name: Serial number: Lamp counter: Cooling fan error The cooling fan has stopped. [Information] Model name: Serial number: Lamp counter: Lamp error The lamp will not turn on. [Information] Model name: Serial number: Lamp counter: Temperature error The projector is overheated. [Information] Model name: Serial number: Lamp counter: Iris calibration error The calibration of the iris has failed. [Information] Model name: Serial number: Lamp counter:
47 Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or projector cabinet to display the Menu. 5. Using On-Screen Menu BLANK VOL FREEZED.ZOOM MENU RD-439E POWER INPUT IMAGE ASPECT INFO. AUTO PC BACK 2. Press the buttons on the remote control or the projector cabinet to display the submenu. 3. Press the OK button on the remote control or the projector cabinet to highlight the top item or the first tab. 4. Use the buttons on the remote control or the projector cabinet to select the item you want to adjust or set. You can use the buttons on the remote control or the projector cabinet to select the tab you want. 5. Press the OK button on the remote control or the projector cabinet to display the submenu window. 6. Adjust the level or turn the selected item on or off by using the buttons on the remote control or the projector cabinet. Changes are stored until adjusted again. 7. Repeat steps 2 -6 to adjust an additional item, or press the BACK button on the remote control or the projector cabinet to quit the menu display. NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings. 8. Press the MENU button to close the menu. To return to the previous menu, press the BACK button.
48 5. Using On-Screen Menu Menu Elements h ighlight s lide bar s ource available buttonthermometer symbol Key symbol Menu windows or dialog boxes typically have the following elements:Highlight ................................................ Indicates the selected menu or item. Source ................................................... Indicates the currently selected source. Slide bar ................................................ Indicates settings or the direction of adjustment. Ta b ......................................................... Indicates a group of features in a dialog box. Selecting on any tab brings its page to the front. Available buttons .................................. Indicates currently available buttons on the projector cabinet or the remote control. Solid triangle ......................................... Indicates fur ther choices are available. A highlighted triangle indicates the item is active. Key symbol ............................................ Indicates the Key Lock is enabled. Thermometer symbol ........................... Indicates the lamp is forcibly being cooled down because the internal temperature is too high. High altitude symbol ................................. Indicates the [Fan mode] is set to [High altitude] mode. Remaining countdown time .................. Indicates the remaining countdown time when the Off Timer is preset. ta b high altitude symbol remaining countdown time solid triangle
49 5. Using On-Screen Menu List of Menu ItemsSome menu items are not available depending on the input source. * The asterisk (*) indicates that the default setting varies depending on the signal. Menu Item Factory default Options Input Computer 1 * Computer 2 (Digital) * Computer 2 (Analog) * VIDEO * S-VIDEO * Adjustment ImageImage mode *1:Standard, 2:Presentation, 3:Cinema, 4:Video, 5:sRGB Detail settings Reference * Standard, Presentation, Cinema, Video, sRGB Gamma Dynamic, Natural, Black detail Color temperature * 5000K, 6500K, 7300K, 8300K, 9300K, 10500K Auto iris (LV-7285/ LV-7280) Off, On Brightness R Brightness G Brightness B Contrast R Contrast G Contrast B * Brightness Contrast Sharpness Color level Color balance Reset Input signal Clock * Tracking * Horizontal position * Vertical position * Overscan *0[%], 5[%], 10[%] Aspect Auto LV-7385/LV-7380/LV-7285/LV-7280:Auto, 4:3, 16:9, 15:9, 16:10, Wide zoom, True size Auto LV-8310/LV-8215: Auto, 4:3, 16:9, 15:9, 16:10, Let- terbox, True size D.image shift 0 (Not available on LV-8310/LV-8215) Setup General Auto keystone On Off, On Keystone adjustment Keystone save OffOff, On Screen color OffOff, Whiteboard, Greenboard, Greenboard (Gray), Light yellow, Light green, Light blue, Sky blue, Light rose, Pink Lamp mode Normal Normal, Quiet Closed caption OffOff, Caption 1, Caption 2, Caption 3, Caption 4, Text 1, Text 2, Text 3,Text 4 Language EnglishEnglish, Deutsch, Français, Italiano, Español, Sven- ska, 日 本 語 , Dansk, Português, Čeština, Magyar, Polski, Nederlands, Suomi, Norsk, Türkçe, Русский , عربي, Ελληνικά , 中文 , 한국어 Menu Color select Color Color, Monochrome Input OSD On Off, On Eco message OffOff, On Display time 45 sec Manual, 5 sec, 15 sec, 45 sec No signal screen Blue Blue, Black, Canon logo Filter message 1500(H) Off, 100(H), 200(H), 500(H), 1000(H), 1500(H) Installation Image flip H/V NoneNone, Rear, Ceiling mounted, Rear, Ceiling mount- ed Key lock OffOff, On Password OffOff, On Communication speed 19200bps 4800bps, 9600bps, 19200bps
50 5. Using On-Screen Menu SetupOptions (1) Auto PC adjustment Normal Off, Normal, Fine Fan mode Auto Auto, High, High altitude Input signal select Computer 1 RGB/ COMPONENTRGB/COMPONENT, RGB, COMPONENT Computer 2 (Analog) RGB/ COMPONENTRGB/COMPONENT, RGB, COMPONENT VIDEO AutoAuto, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM S-VIDEO AutoAuto, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM WXGA mode LV-7385/ LV-7380/ LV-7285/ LV-7280: Off LV-8310/ LV-8215: OnOff, On Progressive On Off, On Beep On Off, On Options (2) Off timer OffOff, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00 Standby mode Normal Normal, Power-saving Direct power on (AC) OffOff, On Direct power on (Comp1) OffOff, On Power management OffOff, 0:05, 0:10, 0:20, 0:30 Default source select LastLast, Auto, Computer 1, Computer 2(Digital), Com- puter 2(Analog), VIDEO, S-VIDEO Information Usage time Remaining lamp time Lamp counter Filter counter Total carbon savings Input Input signal Source index Horizontal frequency Vertical frequency Input signal type RGB, COMPONENT, VIDEO, S-VIDEO, HDTV Video type NTSC, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM Sync type Separate sync, Composite sync, Sync on green, Sync on video Sync polarity Scan type Interlace, Progressive Wired LAN Projector name IP address Subnet mask Gateway address MAC address Version Model Serial number Firmware version Data version Reset Current signal All data Network settings Lamp counter Filter counter
51 5. Using On-Screen Menu 4 Menu Descriptions & Functions [Input] Computer 1 Selects the computer connected to your ANALOG IN-1 input connector. N OTE: • When the component input signal is connected to the ANALOG IN-1 connector, select [Computer 1]. • The projector will determine if the input signal is RGB or component signal. Computer 2 (Digital & Analog) Selects the computer connected to your DIGITAL IN / ANALOG IN-2 connector. NOTE: When the component input signal is connected to the DIGITAL IN/ANALOG IN-2 connector, select [Computer 2 (Analog)]. VIDEO Selects what is connected to your VIDEO input-audio-video equipment. S-VIDEO Selects what is connected to your S-VIDEO input-audio-video equipment. NOTE: A frame may freeze for a brief period of time when a video is played back in fast-forward or fast-rewind with a Video or S-Video source.