Canon projector LV7590 User Manual

51
Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
Image Adjust Menu icon.1
2Use the Point ed buttons to move the red frame pointer to 
the desired item and then press the OK button to display the 
adjustment dialog box. Use the Point 7 8 buttons to adjust 
the setting value.IMAGE AD
jUST MENU
Press the Point 7 button to decrease contrast; press the Point 8 
button to increase the contrast (from 0 to 63).
Press the Point 7 button to...

52
Auto picture control
Use the Point 7 8 buttons to select the desired Auto picture 
control position (Off, L1 or L2).
 Off  . . . .   Auto picture control OFF position.
  L1 . . . . .   Auto picture control LEVEL 1 position.
  L2 . . . . .   Auto picture control LEVEL 2 position.
Clear the check mark if you do not want to apply the adjusted 
color data; select the check mark and then press the OK 
button. The check mark disappears.
Return to the COLOR MANAGEMENT POINTER. (If you press 
the MENU button...

53
Use the Point 7 8 buttons to adjust the gamma value to obtain a 
better balance of contrast (from 0 to 15).Gamma
Press the Point 7 button to decrease the sharpness of the image; 
press the Point 8 button to increase the sharpness of the image 
(from 0 to 31). Sharpness
An interlaced video signal can be displayed in progressive mode. 
Press the Point 7 8 buttons to change the progressive scan mode. 
 
Off  . . . .   Progressive scan mode is “Off.”
  On  . . . .   Progressive scan mode is “On.”
  Film...

54
Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
Setting Menu icon.1
2
Language
The language used in the On-Screen Menu is available in English, 
German, French, Italian, Spanish, Portuguese, Dutch, Swedish, 
Russian, Chinese, Korean, or Japanese.
Use the Point ed buttons to move the red frame pointer to 
the desired item and then press the OK button. The Setting 
dialog box appears.
Press the OK button at 
Language, then the...

55
This function allows you to customize the screen logo with Logo 
select, Capture, and Logo PIN code lock functions.Logo
✔Note:
	 •	 Before	capturing	an	image,	select	“Standard”	in	the	Image	
Select	Menu	to	capture	a	proper	image	(pp.	44,	48).	 Adjusted	
image	on	the	screen	cannot	be	captured.
	 •	 A	signal	from	a	computer	can	be	captured	up	to	XGA	(1024	X	 768).
	 •	 Certain	signals	may	not	be	captured	properly.
	 •	 When	capturing	the	image	that	has	been	adjusted	by	the	 Keystone	function,	the...

56
Change the Logo PIN code lock setting
After a correct Logo PIN code is 
entered, the following dialog box 
appears.
Use the Point 7 8 buttons to switch On/Off,
This function prevents an unauthorized person from changing the 
screen logo.
  Off  . . . .   The screen logo can be changed freely from the Logo 
Menu.
  On  . . . .   The screen logo cannot be changed without a Logo 
PIN code.
If you want to change the Logo PIN code lock setting, press the 
OK button and the Logo PIN code dialog box appears....

57
Lamp mode
Filter control
Choose the running speed of cooling fans from the following 
options.
 Normal .......  Operate in this mode under normal conditions.
  Max ...........  Use this mode when you want to increase the 
cooling effect when operating the projector in high 
ambient temperature environment. Fan noise is 
louder than “Normal”. 
Fan control
This function allows you to change the brightness of the screen.
Auto  . . . . . 
 Brightness according to the input signal. 
Normal  . . .   Normal...

58
On start
When this function is set to “On,” the projector will be 
automatically turned on just by connecting the AC power cord to 
the wall outlet.
✔Note:
	 •	 Be	sure	to	turn	off	the	projector	properly	(see	“Turning	Off	the	
Projector”	on	page	29).	If	the	projector	is	turned	off	in	the	incorrect	
sequence,	the	On	start	function	does	not	work	properly.
Power management
Time left before the lamp is off
For reducing power consumption as well as maintaining the lamp 
life, the Power management function...

59
Security
Key lockSecurity
Select Key lock and 
this box appears. 
Choose one of the 
alternatives with the 
Point ed buttons 
and select [Yes] to 
activate it.
This function locks the side control and remote control unit 
buttons to prevent operation by unauthorized persons.
. . . . .  Unlocked.
. . . . .   Lock the side control buttons.
  To unlock, use the remote control unit.
. . . . .   Lock the remote control unit buttons.  
To unlock, use the side control.
If the side control accidentally...

60
Change the PIN Code 
Change the PIN code
The PIN code can be changed to your desired four-digit number. 
Press the Point d buttons to select “PIN code change” and press 
the OK button. The New PIN code input dialog box appears. Set a 
new PIN code.
Change the PIN Code Lock setting
Change the PIN code lock setting
Use the Point 7 8 
buttons to switch 
between the options.
Enter a PIN code
Use the Point 7 8 button to select Off, On1, or On2 and then 
move the pointer to “Quit” with the Point d button....