Canon projector LV7392A User Manual
Have a look at the manual Canon projector LV7392A User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 66
66
Maintenance and Cleaning
Filter prevents dust from accumulating on the optical elements inside th\
e projector. Should the Filter become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. If a “Filter warning” icon appears on the screen, replace the Filter immediately. Replace the filter by following the steps below.
CAUTION
- Do not operate the projector with the filter removed. Dust may...](http://img.usermanuals.tech/thumb/14/1291/w64_projector-lv7392a-1478290621_d-65.png "Page 66
66
Maintenance and Cleaning
Filter prevents dust from accumulating on the optical elements inside th\
e projector. Should the Filter become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. If a “Filter warning” icon appears on the screen, replace the Filter immediately. Replace the filter by following the steps below.
CAUTION
- Do not operate the projector with the filter removed. Dust may...")
![Page 69
Maintenance and Cleaning
69
Maintenance and Cleaning
This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.
● Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time than other similar lamp\
s.
● If the...](http://img.usermanuals.tech/thumb/14/1291/w64_projector-lv7392a-1478290621_d-68.png "Page 69
Maintenance and Cleaning
69
Maintenance and Cleaning
This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.
● Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time than other similar lamp\
s.
● If the...")
![Page 71
71
Appendix
No image – Check the connection between your computer or video equipment and the projector. See pages 17-19. – See if the input signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connect\
ing to a projector. See your computer’s instruction manual for the setting. – It takes about 30 seconds to display an image after...](http://img.usermanuals.tech/thumb/14/1291/w64_projector-lv7392a-1478290621_d-70.png "Page 71
71
Appendix
No image – Check the connection between your computer or video equipment and the projector. See pages 17-19. – See if the input signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connect\
ing to a projector. See your computer’s instruction manual for the setting. – It takes about 30 seconds to display an image after...")
![Page 72
72
Appendix
The image is distorted or runs off. – Check PC adjust menu or Screen menu and adjust them. See pages 33-34, 38-40.
PIN code dialog box appears – PIN code lock is being set. Enter a PIN code (the “1234” or \
at start-up. numbers you have set). See pages 22, 60-61.
The Remote control unit does – Check the batteries. not work. – Make sure no obstruction is between the projector and remote control. – Make sure you are not too...](http://img.usermanuals.tech/thumb/14/1291/w64_projector-lv7392a-1478290621_d-71.png "Page 72
72
Appendix
The image is distorted or runs off. – Check PC adjust menu or Screen menu and adjust them. See pages 33-34, 38-40.
PIN code dialog box appears – PIN code lock is being set. Enter a PIN code (the “1234” or \
at start-up. numbers you have set). See pages 22, 60-61.
The Remote control unit does – Check the batteries. not work. – Make sure no obstruction is between the projector and remote control. – Make sure you are not too...")
![Page 76
76
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with t\
he V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited.
Note: The specifications are subject to change without notice.
ON-SCREEN DISPLAYRESOLUTIONH-frekv.(KHz)V-frekv.(Hz)SXGA 81280 x 102463.9860.02SXGA 91280 x 102479.97675.025SXGA 101280 x 96060.0060.00SXGA 111152 x 90061.2065.20SXGA 121152 x...](http://img.usermanuals.tech/thumb/14/1291/w64_projector-lv7392a-1478290621_d-75.png "Page 76
76
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with t\
he V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited.
Note: The specifications are subject to change without notice.
ON-SCREEN DISPLAYRESOLUTIONH-frekv.(KHz)V-frekv.(Hz)SXGA 81280 x 102463.9860.02SXGA 91280 x 102479.97675.025SXGA 101280 x 96060.0060.00SXGA 111152 x 90061.2065.20SXGA 121152 x...")
71
Appendix
No image – Check the connection between your computer or video equipment and the projector. See pages 17-19. – See if the input signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connect\
ing to a projector. See your computer’s instruction manual for the setting. – It takes about 30 seconds to display an image after turning on the projector. See page 21. – Check the Input signal, color system, video system or computer system mode. – Make sure the temperature is not out of the specified Operating Temperature (41˚F–95˚F [5˚C–35˚C]). – When Blank is operating, the image cannot be displayed. Press the BLANK button or a\
ny other button on the remote control unit.
No sound – Check the audio cable connection from audio input source. – Adjust the audio source. – Press the Volume + button. See page 27. – Press the Mute button. See page 27. – When the AUDIO OUT is plugged-in, the projector's built-in speaker is n\
ot available. – Is the image projected? You will hear the Computer and VIDEO sound only when the image is projected.
The color is strange. – Check the Input signal, color system,video system or computer system mode. – Make sure the Blackboard is not selected on Image select menu. See pages 35,44.
Some displays are not seen – Check the Display function. See page 53. during the operation.
Auto PC adjustment function – Check the Input signal. Auto PC adjustment function can not does not work. work when 480p, 575p, 720p, 480i, 575i, 1035i or 1080i is selected (see page 31), or when the signal is coming from the HDMI terminal. \
The setting does not remain – Make sure you selected Store after adjusting setting. Some after turning off power. settings can not be stored if not registered with Store. See pages 36,46.
Power management mode – Power management mode function can not work while Freeze does not work. or BLANK function is running. See page 56.
Capture function does not work. – Check the connection and the input signal to see if there is signal.
Auto setup does not – Make sure Off is not selected at any function of Auto setup. work properly. See page 52. – Make sure On is not selected at the Ceiling function. See pages 38,40,48,50.
Auto keystone function does not – Make sure the Auto keystone function is not set to Manual. work even when the projector is Press the AUTO SET button on the top control. See tipped. pages 26, 52.
72
Appendix
The image is distorted or runs off. – Check PC adjust menu or Screen menu and adjust them. See pages 33-34, 38-40.
PIN code dialog box appears – PIN code lock is being set. Enter a PIN code (the “1234” or \
at start-up. numbers you have set). See pages 22, 60-61.
The Remote control unit does – Check the batteries. not work. – Make sure no obstruction is between the projector and remote control. – Make sure you are not too far from the projector when using the remote control unit. Maximum operating range is 16.4'(5 m). – Make sure the code of the remote control unit is conformed to the projector’s code. See page 59. – Unlock the Key lock function for the remote control unit function. See page 60.
Indicator blinks or lights. – Check the status of the projector with referring to "Indicators and projector Condition". See page 75.
The exclamation mark appears – Your operation is invalid. Operate correctly. on the screen.
Top control does not work. – The top control is not available if the top control is locked at Key lock under Security of Setting section. See page 60.
– The projector detects an abnormal condition. Unplug the AC power cord and contact the dealer where you purchased the projector or the service center.
WARNING :High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, co\
ntact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service.
appears on the screen
Appendix 73 Appendix Menu Tree Computer Input/HDMI Input/VIDEO Input VolumeMuteOn/OffSound0-63 ANALOG PCCOMPONENT S-VIDEOSCART Input VIDEO COMPUTER HDMI MICOn/OffMIC GAIN0-63STANDBY MIC OUTOn/Off Presentation CinemaBlackboard (Green) User 1 Image selectStandard ColorboardRed/Blue/Yellow/Green User 4 High contrast InformationInput Source Information Display LanguageSetting20 languages provided. Blue/User/BlackOff /On/Countdown offLogo select Standby On/Off Code 1–Code 2 BackgroundDisplayLogo Power management mode Direct power on Remote control ExitOff Security Timer (1–30 Min) L 1/L 2Fan Off UserCaptureYes/No Off/OnLogo PIN code change Logo PIN code lock OffProjectorRemote control Key lock Default Off/On 1/On 2PIN code change On/Off Standby mode Auto PCAuto keystoneAutoManualOff Warning log Yes/NoFactory default Auto inputOff/On 1/On 2Auto setup Closed CaptionClosed CaptionOff/CC1/CC2/CC3/CC4ColorColor/White Lamp modeHigh/Normal/Eco HLamp counter Yes/No Lamp counter Lamp counter reset Menu position HFilter counter Yes/NoOff/2000H/3000H/4000HFilter counterTimerFilter counter reset P-timer Eco/Network*1/Serial*2 Count upCount downTimerStart/Stop/RestartResetExit Off/On 1/On 2Fan controlVideo delay controlOff/On PIN code lock ImageHDMI setupNormal/EnhancedSoundHDMI/COMPUTER LAN1/LAN2/LAN3Network*1 Network PIN code LAN mode selsectNetwork setting Network factory default Network Information DHCP On/DHCP Off Yes/No Main ProgramMAC addressIP address *1 Network is only for LV-7292A, LV-7297A, LV-7392A, LV-8227A.*2 Serial is only for LV-7292M, LV-7297M, LV-8227M.
74 Appendix HDMI Input/VIDEO Input Auto1080i1035i720p575p480p575i480i 0–630–63 Off System (2)AutoPALSECAMNTSCNTSC 4.43PAL-MPAL-N System (3) Image AdjustContrastBrightnessColorTint RedGreenBlueSharpness ResetStore Gamma Progressive 0–630–630–630–15 0–15 User 1 Aspect Yes/No OffNoise reductionL1L2 0–630–63 User 4 L2L1 Film Color temp. Scale Reset H/V H/VYes/NoYes/No Custom adj.On/OffH&V MidLowXLow UserHigh PositionCommon Auto iris*Off/On SVGA 1Mode 1Mode 2 - - - - Total dotsHorizontal positionVertical position Display area HDisplay area VReset Image AdjustContrastBrightness Color temp. Red Gamma Store 0–630–63 Computer Input PC adjust 0–63 0–15 User 1User 4 Aspect Yes/No * Systems displayed in the System Menu vary depending on an input signal. ResetYes/No Sharpness0–15 Mode 10 Clamp GreenBlue0–630–63 Store Mode free System (1) Mode 1 ScaleH&VH/V H/VYes/NoYes/No On/Off Auto PCFine sync0–31 MidLowXLow UserHigh Current mode Mode 1Mode 10 NormalFull Digital zoom – Custom Digital zoom +Custom adj. Zoom16:9 CommonPosition Reset Auto irisOff/On Ture CeilingKeystone ResetRear CeilingKeystone ResetRear Custom NormalFull Zoom16:9 Aspect Scale Reset H/V H/VYes/NoYes/No Custom adj.On/OffH&VPositionCommon Aspect ScaleH&VH/V H/VYes/NoYes/No On/Off NormalFull Digital zoom – Custom Digital zoom +Custom adj. Zoom16:9 CommonPosition Reset True CeilingKeystone RearCeilingKeystone Reset Rear Natural wide NormalFull Zoom16:9 Custom Reset4:3 / 16:9 / Default(16:10)Screen aspect4:3 / 16:9 / Default(16:10)Screen aspect For LV-7292A, LV-7297A, LV-7392A, LV-7292M, LV-7297M For LV-8227A, LV-8227M For LV-7292A, LV-7297A, LV-7392A, LV-7292M, LV-7297M For LV-8227A, LV-8227M * Auto iris is only for LV-7292A, LV-7297A, LV-7392A, LV-8227A.
Appendix 75 Appendix Check the indicators for projector condition. • • • green.• • • red • • • off • • • blinks green. When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. (pp. 62,68) Indicators and Projector Condition • • • blinks red. Indicators Projector ConditionPOWERred/greenWARNING redLAMP REPLACEyellow The projector is off. (The AC power cord is unplugged.) The projector is in stand-by mode. Press the POWER button to turn on the projector. The projector is operating normally. The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed and the POWER indicator stops blinking. The projector is in the Power management mode. The lamp lights up when operating the projector, and the projector begins to work. The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the POWER indicator stops blinking and the projector can be turned on. (The WARNING indicator keeps blinking.) The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING indicator stops blinking. Please check the Air filter. The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard. Reaches recommended replacement time.The icon appearing on the top right corner of the image indicates the replacement of the lamp.Please replace the lamp as soon as possible. The time before the LAMP REPLACE indicator lighting up, depends on the operating conditions (the state of the lamp mode). • • • yellow.
76 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with t\ he V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. Note: The specifications are subject to change without notice. ON-SCREEN DISPLAYRESOLUTIONH-frekv.(KHz)V-frekv.(Hz)SXGA 81280 x 102463.9860.02SXGA 91280 x 102479.97675.025SXGA 101280 x 96060.0060.00SXGA 111152 x 90061.2065.20SXGA 121152 x 90071.4075.60SXGA 131280 x 102450.0086.00 (Interlace)SXGA 141280 x 102450.0094.00 (Interlace)SXGA 151280 x 102463.3760.01SXGA 161280 x 102476.9772.00SXGA 171152 x 90061.8566.00SXGA 181280 x 102446.4386.70 (Interlace)SXGA 191280 x 102463.7960.18SXGA 201280 x 102491.14685.024SXGA+ 11400 x 105063.9760.19SXGA+ 21400 x 105065.3560.12SXGA+ 31400 x 105065.1259.90MAC211152 x 87068.6875.06MAC1280 x 96075.0075.08MAC1280 x 102480.0075.08WXGA 11366 x 76848.3660.00WXGA 21360 x 76847.7060.00WXGA 31376 x 76848.3660.00WXGA 41360 x 76856.1672.00WXGA 61280 x 76847.77659.87WXGA 71280 x 76860.28974.893WXGA 81280 x 76868.63384.837WXGA 91280 x 80049.60060.050WXGA 101280 x 80041.20050.000WXGA 111280 x 80049.70259.810WXGA 121280 x 80063.9860.02WXGA 171280 x 80058.28969.975WXGA 181280 x 80060.04471.995WXGA 191280 x 80062.79074.928WXGA 201280 x 80071.55384.879WXGA 211280 x 76855.99369.991WXGA 221280 x 76857.67572.004WUXGA 11920 x 120074.55659.885WUXGA 21920 x 120074.03859.950WSXGA+ 11680 x 105065.29059.954WXGA+ 11440 x 90055.93559.887WXGA+ 21440 x 90074.91860.000UXGA 11600 x 120075.0060.00UXGA 21600 x 120081.2565.00UXGA 31600 x 120087.570.00UXGA 41600 x 120093.7575.00720p1280 x 72045.0060.00720p1280 x 72037.5050.001035i1920 x 103533.7560.00(Interlace)1080i1920 x 108033.7560.00(Interlace)1080i1920 x 108028.12550.00(Interlace) ON-SCREEN DISPLAYRESOLUTIONH-frekv.(KHz)V-frekv.(Hz)VGA 1640 x 48031.4759.88VGA 2720 x 40031.4770.09VGA 3640 x 48031.4770.09VGA 4640 x 48037.8674.38VGA 5640 x 48037.8672.81VGA 6640 x 48037.5075.00VGA 7640 x 48043.26985.00MAC LC13640 x 48034.9766.60MAC 13640 x 48035.0066.67480p640 x 48031.4759.88575p768 x 57631.2550.00480i640 x 48015.73460.00(Interlace)575i768 x 57615.62550.00(Interlace)SVGA 1800 x 60035.15656.25SVGA 2800 x 60037.8860.32SVGA 3800 x 60046.87575.00SVGA 4800 x 60053.67485.06SVGA 5800 x 60048.0872.19SVGA 6800 x 60037.9061.03SVGA 7800 x 60034.5055.38SVGA 8800 x 60038.0060.51SVGA 9800 x 60038.6060.31SVGA 10800 x 60032.7051.09SVGA 11800 x 60038.0060.51MAC 16832 x 62449.7274.55MAC 191024 x 76860.2475.08XGA 11024 x 76848.3660.00XGA 21024 x 76868.67784.997XGA 31024 x 76860.02375.03XGA 41024 x 76856.47670.07XGA 51024 x 76860.3174.92XGA 61024 x 76848.5060.02XGA 71024 x 76844.0054.58XGA 81024 x 76863.4879.35XGA 91024 x 76836.0087.17(Interlace)XGA 101024 x 76862.0477.07XGA 111024 x 76861.0075.70XGA 121024 x 76835.52286.96(Interlace)XGA 131024 x 76846.9058.20XGA 141024 x 76847.0058.30XGA 151024 x 76858.0372.00SXGA 11152 x 86464.2070.40SXGA 21280 x 102462.5058.60SXGA 31280 x 102463.9060.00SXGA 41280 x 102463.3459.98SXGA 51280 x 102463.7460.01SXGA 61280 x 102471.6967.19SXGA 71280 x 102481.1376.107
Appendix 77 Appendix Note: • The specifications are subject to change without notice.• Depending on your PC settings, the digital signals of your PC may not be projected correctly. In such a case, confirm your PC settings.• When you project a DVI signal, connect the cables, turn the projector on, then select the input. Finally, turn on your PC. Be sure to follow this procedure, otherwise an image \ may not be projected on the screen. If an image is not projected correctly, restart your PC.• Do not disconnect the cable while the projector is running. If the cable has been disconnected and then reconnected, an image may not be correctly projected. When the input signal is digital from HDMI terminal, refer to the chart \ below. ON-SCREEN DISPLAYRESOLUTIONH-frekv.(KHz)V-frekv.(Hz)D-480p640 x 48031.4759.88D-575p768 x 57531.2550.00D-720p1280 x 72037.5050.00D-720p1280 x 72045.0060.00D-VGA640 x 48031.4759.94D-SVGA800 x 60037.87960.32D-XGA1024 x 76843.36360.00D-WXGA 11366 x 76848.3660.00D-WXGA 21360 x 76847.760.00D-WXGA 31376 x 76848.3660.00D-WXGA 41360 x 76856.16072.000D-WXGA 51366 x 76846.50050.000D-WXGA 61280 x 76847.77659.870D-WXGA 71280 x 76860.28974.893D-WXGA 81280 x 76868.63384.837D-WXGA 91280 x 80049.57259.870D-WXGA 101280 x 80041.20050.000D-WXGA 111280 x 80049.70259.810D-WXGA 121280 x 80063.9860.02 ON-SCREEN DISPLAYRESOLUTIONH-frekv.(KHz)V-frekv.(Hz)D-WXGA 171280x80058.28969.975D-WXGA 181280x80060.04471.995D-WXGA 191280x80062.79074.928D-WXGA 201280x80071.55384.879D-WXGA 211280x76855.99369.991D-WXGA 221280x76857.67572.004D-SXGA11280 x 102463.9860.02D-SXGA21280 x 102460.27658.069D-SXGA31280 x 102431.6529.80D-SXGA+ 11400 x 105063.9760.19D-SXGA+ 21400 x 105065.35060.120D-SXGA+ 31400 x 105065.12059.900D-WSXGA +11680 x 105065.29059.954D-WXGA +11440 x 90055.93559.887D-1035i1920 x 103533.7560.00(Interlace)D-1080i1920 x 108033.7560.00(Interlace)D-1080i1920 x 108028.12550.00(Interlace)D-WUXGA 21920 x 120074.03859.95D-1080p1920 x 108067.560.00D-1080p1920 x 108056.2550.00
78 Appendix Technical Specifications Mechanical Information Projector TypeMulti-media Projector Dimensions (W x H x D) 13.13” x 3.98” x 9.72” (333.5mm x 101.0mm x 247.0mm) (Not including protrusions) Net WeightLV-7292A, LV-7297A, LV-7392A, LV-8227A : 6.6 lbs (2.99 kg)LV-7292M, LV-7297M, LV-8227M : 6.4 lbs (2.9 kg)Foot Adjustment0˚ to 10˚ Panel Resolution LCD Panel SystemLV-7292A, LV-7297A, LV-7292M, LV-7297M, L: 0.55”; LV-7392A: 0.63”; LV-8227A, LV-8227M: 0.59”TFT Active Matrix type, 3 panels Panel ResolutionLV-7292A, LV-7297A, LV-7392A, LV-7292M, LV-7297M: 1,024 x 768 dotsLV-8227A, LV-8227M: 1,280 x 800 dots Number of PixelsLV-7292A, LV-7297A, LV-7392A, LV-7292M, LV-7297M: 2,359,296 (1,024 x 768 x 3 panels) LV-8227A, LV-8227M: 3,072,000 (1,280 x 800 x 3 panels) Signal Compatibility Color SystemPAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-NSD/HD TV Signal480i, 480p, 575i, 575p, 720p, 1035i, and 1080iInput Scanning FrequencyH-sync. 15 kHz–100 kHz, V-sync. 50–100 Hz Optical Information Projection Image Size (Diagonal)Adjustable from 40” to 300” Throw DistanceLV-7292A, LV-7297A, LV-7292M, LV-7297M: 4.3’ -38.7’ (1.3m - 11.8m) LV-7392A: 3.6’ - 34.4’ (1.1m - 10.5m)LV-8227A, LV-8227M: 4.0’ - 36.4’ (1.2m - 11.1m) Projection LensF 2.0 ~ 2.15 lens with f 18.38 mm ~ 22.06 mm with manual zoom and focusProjection Lamp215 W Image Information Brightness(Lamp mode: "High", Image mode: "Presentation") LV-7392ALV-7297A, LV-7297MLV-8227A, LV-8227MLV-7292A, LV-7292M3000 lm2600 lm2500 lm2200 lmContrast ratio(Lamp mode: "High", Image mode: "Presentation"Auto iris*: "On") LV-8227ALV-7292A, LV-7297A,LV-7392ALV-7292M, LV-7297M, LV-8227M 3000:12000:1500:1Uniformity85% Interface VIDEO Input JackRCA Type x 1Audio Input JackRCA Type x 2Computer In/S-VIDEO In/COMPONENT In/D-sub 15 pin x 1 MIC Audio Input JackMini Jack (stereo) x 1ControlD-sub 9 pin x 1Audio Output JackMini Jack (stereo) x 1 (variable)LAN Connection Terminal (Only for LV-7292A, LV-7297A, LV-7392A and LV-8227A.) RJ-45 HDMIHDMI (V.1.3 with Deep Color) x 1 AudioInternal Audio AmpLV-7292A, LV-7297A, LV-7392A, LV-8227A :10 W RMS;LV-7292M, LV-7297M, LV-8227M :1 W RMSBuilt-in SpeakerLV-7292A, LV-7297A, LV-7392A, LV-8227A :ø1.6” (37 mm);LV-7292M, LV-7297M, LV-8227M :ø1.12” (28 mm) * Auto iris is only for LV-7292A, LV-7297A, LV-7392A, LV-8227A.
Appendix
79
Appendix
Model No.
COMPONENT-VGA Cable : LV-CA32
S-VIDEO-VGA Cable : LV-CA33
Soft Carrying Case : LV-SC01
Remote controller : LV-RC06
Projector Attachment : LV-CL17
Ceiling Attachment : LV-CL18
High Ceiling Attachment : LV-CL19
Lamp : LV-LP35
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model No. to the sales dealer.
Accessories User’s Manual (CD-ROM) Important Information and Quick Start Guide Warranty card AC Power Cord Remote controller and Batteries VGA Cable Lens Cap with String PIN Code Label Ferrite core Filter Cover for Ceiling Mount
● The specifications are subject to change without notice.● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
Optional Parts
Power supplyAC 100–120 V (3.6A Max. ), 50/60 Hz (U.S.A and Canada)AC 100–240 V (3.6A -2.0A Max. ), 50/60 Hz (For other countries)
Power consumptionLamp mode:Eco/Normal/ High
LV-7292ALV-7297ALV-7392ALV-8227A185W/225W/250W185W/250W/270WLV-7292MLV-7297M, LV-8227M177W/220W/245W177W/245W/265W
Standby Power consumption
Standby mode:Eco/Network*
LV-7292A, LV-7297A, LV-7392A, LV-8227A0.49W/9.6WLV-7292M, LV-7297M, LV-8227M0.49W/9.0W
Operating Environment
Operating Temperature41˚F–95˚F (5 ˚C–35 ˚C)
Storage Temperature14˚F–140˚F (-10˚C–60 ˚C)
Remote control unit
BatteryAAA Type 1.5V x 2Operating Range16.4' (5 m), ±30˚Dimensions(W x H x D)2.0" x 0.7" x 4.3" (52 mm x 18 mm x 110 mm)
Net Weight2.37 oz (67 g) (including batteries)
* Network is only for LV-7292A, LV-7297A, LV-7392A, LV-8227A.
80 Appendix This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see the user’s manual of “Network Set-up and Operation.” PJLink is a registered trademark of JBMIA and pending trademark in some countries. Pj Link Notice (Only for LV-7292A, LV-7297A, LV-7392A, LV-8227A) Attaching the Filter Cover to the Projector The supplied filter cover is designed forpreventing dust accumulation on the filterwhen mounting the projector on the ceiling. Place the filter cover on the filter as thepicture shown below. Turn over the projector.1 2 Attach the projector to the ceiling mountin accordance with the instruction manualswhich come with the ceiling mount. 3 Note: • To keep the filter cover in position, be sure to attach the drop-prevention wire by threading it through the hole of the filter cover. • If the LV-CL17 Projector Attachment is applied, the supplied filter cover is unnecessary.Front feet Projector Caps Filter Cover(supplied) Hole Drop-prevention Wire(not supplied) To Ceiling Mount Projector InputPJLink InputParameter COMPUTERANALOG PCRGB 111 COMPONENTVIDEO 323 SCARTRGB 212 S-VIDEOVIDEO 222 HDMIHDMIDIGITAL 131 VIDEOVIDEOVIDEO 121