Canon projector LV7385 User Manual
Here you can view all the pages of manual Canon projector LV7385 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
42
To disable the Password function:
1. Press the MENU button.
t he menu will be displayed.
2. Select [Setup]
→ [Installation]
→ [Password] and press the OK button.
t
he Off/On menu will be displayed.
3. Select [Off] and press the OK button.
t he Password Confi rmation screen will be displayed.
4. Type in your password and press the OK button.
When the correct password is entered, the Password function will be disabled.
NOTE: If you forget your password, contact your dealer.
4. Convenient...](http://img.usermanuals.tech/thumb/14/1289/w300_projector-lv7385-1478290501_d-50.png "Page 51
42
To disable the Password function:
1. Press the MENU button.
t he menu will be displayed.
2. Select [Setup]
→ [Installation]
→ [Password] and press the OK button.
t
he Off/On menu will be displayed.
3. Select [Off] and press the OK button.
t he Password Confi rmation screen will be displayed.
4. Type in your password and press the OK button.
When the correct password is entered, the Password function will be disabled.
NOTE: If you forget your password, contact your dealer.
4. Convenient...")
42 To disable the Password function: 1. Press the MENU button. t he menu will be displayed. 2. Select [Setup] → [Installation] → [Password] and press the OK button. t he Off/On menu will be displayed. 3. Select [Off] and press the OK button. t he Password Confi rmation screen will be displayed. 4. Type in your password and press the OK button. When the correct password is entered, the Password function will be disabled. NOTE: If you forget your password, contact your dealer. 4. Convenient...
Page 52
43 4. Convenient Features Network and Alert Mail Settings by Using an HTTP Browser Overview Connecting the projector to a network allows the projector to send an alert mail that informs the user that the lamp has reached the end of its life or an error has occurred. The IP address and subnet mask of the projector can be set on the Network Setting screen of the web browser by using an HTTP server function. Please be sure to use “Microsoft Internet Explorer 6.0” or a higher version for the web...
Page 53
![Page 53
44
Network Settings
http:// /index.html
DHCP .................................. Enabling this option automatically assigns an IP address to the projector from your DHCP
server. Disabling this option allows you to register the IP address or subnet mask number
obtained from your network administrator.
NOTE: You can check the IP address in the menu when [ENABLE] is selected for [DHCP]. To do
so, from the menu, select [Information] → [Wired LAN].
IP ADDRESS ....................... Set your IP address of...](http://img.usermanuals.tech/thumb/14/1289/w300_projector-lv7385-1478290501_d-52.png "Page 53
44
Network Settings
http:// /index.html
DHCP .................................. Enabling this option automatically assigns an IP address to the projector from your DHCP
server. Disabling this option allows you to register the IP address or subnet mask number
obtained from your network administrator.
NOTE: You can check the IP address in the menu when [ENABLE] is selected for [DHCP]. To do
so, from the menu, select [Information] → [Wired LAN].
IP ADDRESS ....................... Set your IP address of...")
44 Network Settings http:// /index.html DHCP .................................. Enabling this option automatically assigns an IP address to the projector from your DHCP server. Disabling this option allows you to register the IP address or subnet mask number obtained from your network administrator. NOTE: You can check the IP address in the menu when [ENABLE] is selected for [DHCP]. To do so, from the menu, select [Information] → [Wired LAN]. IP ADDRESS ....................... Set your IP address of...
Page 54
45 Alert Mail Setting http:// /lanconfig.html This option notifies your computer of an error message via e-mail when using wired LAN. An error message notification will be sent when the projector lamp has reached the end of its usable life or an error occurs in the projector. HOST NAME ............................ Type in the hostname of the network connected to the projector. Up to 60 alphanumeric characters can be used. If the host name is unknown, type in a string of characters repre- senting the...
Page 55
![Page 55
46
4. Convenient Features
List of Error Messages
Subject/BodyProjector status Message
Message subject At the time of sending test mail
[Projector] Test mail
At the time when error is found [Projector] Projector information
Message body Test mail
Alert mail configurations are as follows:
Model name:
Serial number:
Sender's address:
SMTP server name:
Recipient's address 1:
Recipient's address 2:
Recipient's address 3:
Lamp replacement Replace with the new lamp.
[Information]
Model name:...](http://img.usermanuals.tech/thumb/14/1289/w300_projector-lv7385-1478290501_d-54.png "Page 55
46
4. Convenient Features
List of Error Messages
Subject/BodyProjector status Message
Message subject At the time of sending test mail
[Projector] Test mail
At the time when error is found [Projector] Projector information
Message body Test mail
Alert mail configurations are as follows:
Model name:
Serial number:
Sender's address:
SMTP server name:
Recipient's address 1:
Recipient's address 2:
Recipient's address 3:
Lamp replacement Replace with the new lamp.
[Information]
Model name:...")
46 4. Convenient Features List of Error Messages Subject/BodyProjector status Message Message subject At the time of sending test mail [Projector] Test mail At the time when error is found [Projector] Projector information Message body Test mail Alert mail configurations are as follows: Model name: Serial number: Sender's address: SMTP server name: Recipient's address 1: Recipient's address 2: Recipient's address 3: Lamp replacement Replace with the new lamp. [Information] Model name:...
Page 56
47 Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or projector cabinet to display the Menu. 5. Using On-Screen Menu BLANK VOL FREEZED.ZOOM MENU RD-439E POWER INPUT IMAGE ASPECT INFO. AUTO PC BACK 2. Press the buttons on the remote control or the projector cabinet to display the submenu. 3. Press the OK button on the remote control or the projector cabinet to highlight the top...
Page 57
48 5. Using On-Screen Menu Menu Elements h ighlight s lide bar s ource available buttonthermometer symbol Key symbol Menu windows or dialog boxes typically have the following elements:Highlight ................................................ Indicates the selected menu or item. Source ................................................... Indicates the currently selected source. Slide bar ................................................ Indicates settings or the direction of adjustment. Ta b...
Page 58
49 5. Using On-Screen Menu List of Menu ItemsSome menu items are not available depending on the input source. * The asterisk (*) indicates that the default setting varies depending on the signal. Menu Item Factory default Options Input Computer 1 * Computer 2 (Digital) * Computer 2 (Analog) * VIDEO * S-VIDEO * Adjustment ImageImage mode *1:Standard, 2:Presentation, 3:Cinema, 4:Video, 5:sRGB Detail settings Reference * Standard, Presentation, Cinema, Video, sRGB Gamma Dynamic, Natural, Black...
Page 59
50 5. Using On-Screen Menu SetupOptions (1) Auto PC adjustment Normal Off, Normal, Fine Fan mode Auto Auto, High, High altitude Input signal select Computer 1 RGB/ COMPONENTRGB/COMPONENT, RGB, COMPONENT Computer 2 (Analog) RGB/ COMPONENTRGB/COMPONENT, RGB, COMPONENT VIDEO AutoAuto, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM S-VIDEO AutoAuto, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM WXGA mode LV-7385/ LV-7380/ LV-7285/ LV-7280: Off LV-8310/ LV-8215: OnOff, On Progressive...
Page 60
![Page 60
51
5. Using On-Screen Menu
4 Menu Descriptions & Functions [Input]
Computer 1
Selects the computer connected to your ANALOG IN-1 input connector.
N OTE:
• When the component input signal is connected to the ANALOG IN-1 connector, select [Computer 1].
• The projector will determine if the input signal is RGB or component signal.
Computer 2 (Digital & Analog)
Selects the computer connected to your DIGITAL IN / ANALOG IN-2 connector.
NOTE: When the component input signal is connected to the DIGITAL...](http://img.usermanuals.tech/thumb/14/1289/w300_projector-lv7385-1478290501_d-59.png "Page 60
51
5. Using On-Screen Menu
4 Menu Descriptions & Functions [Input]
Computer 1
Selects the computer connected to your ANALOG IN-1 input connector.
N OTE:
• When the component input signal is connected to the ANALOG IN-1 connector, select [Computer 1].
• The projector will determine if the input signal is RGB or component signal.
Computer 2 (Digital & Analog)
Selects the computer connected to your DIGITAL IN / ANALOG IN-2 connector.
NOTE: When the component input signal is connected to the DIGITAL...")
51 5. Using On-Screen Menu 4 Menu Descriptions & Functions [Input] Computer 1 Selects the computer connected to your ANALOG IN-1 input connector. N OTE: • When the component input signal is connected to the ANALOG IN-1 connector, select [Computer 1]. • The projector will determine if the input signal is RGB or component signal. Computer 2 (Digital & Analog) Selects the computer connected to your DIGITAL IN / ANALOG IN-2 connector. NOTE: When the component input signal is connected to the DIGITAL...