Canon projector LV7365 User Manual

							
2
5. Using On-Screen Menu
❷ Menu Elements
highlight
title
s lide bar
source
solid triangle
r adio button
thermometer symbol
Key symbol
Menu windows or dialog boxes typically have the following elements:
Title  .......................................................Indicates the menu title.
Highlight  ................................................Indicates the selected menu or item. 
Source  ...................................................Indicates the currently selected source.
Remaining countdown time  ..................Indicates the remaining countdown time when the Off Timer is preset.
Slide bar  ................................................Indicates settings or the direction of adjustment.
Tab  .........................................................Indicates a group of features in a dialog box. Selecting on any tab brings its page to the front.
Radio button  .........................................Use this round button to select an option in a display box.
Solid triangle  .........................................Indicates  fur ther  choices  are  available.  A  highlighted  triangle  indicates  the  item  is 
active. 
Key symbol  ............................................Indicates the Key Lock is enabled.
Thermometer symbol ...........................Indicates  the  lamp  is  forcibly  being  cooled  down  because  the  internal  temperature  is 
too high.
High altitude symbol (LV-7365 only)  .......Indicates the [Fan mode] is set to [High altitude] mode.
t ab r
emaining countdown time
[Menu example for LV-7365]
h igh altitude symbol
( l V-7365 only) 
						

							
3
5. Using On-Screen Menu
❸ List of Menu Items
Image adjustment   Default Item     
Image mode     1: Standard, 2: Presentation, 3: Cinema, 4: Video, 5: sRGB
  Detail settings  General
     Reference   Standard, Presentation, Cinema, Video, sRGB
     Gamma   Dynamic, Natural, Black detail
     Color temperature    XLow, Low, Mid, High
    White balance
    Brightness RGB, Contrast RGBBrightnessContrastSharpnessColor levelColor balanceReset
Display settings    Default Item       
Aspect    * Normal, Wide zoom, Cinema, True size
Cinema position
Horizontal position    *
Vertical position    *
Clock    *
Tracking    *
Video filter    Off Off, Less, More
Setup    Default Item       
General 
Auto keystone (LV-7365/LV-7265)  On  Off, On
    Keystone adjustment   
    Keystone save  Off Off, On
    Screen color  Off Off, Greenboard, Greenboard(Gray), Light yellow,
       Light green, Light blue, Sky blue, Light rose, Pink
    Lamp mode  Normal Normal, Quiet
    Language  English English, Deutsch, Français, Italiano, Español,
       Português, Nederlands, Svenska, Norsk, Suomi,
       Čeština, Magyar, Polski, Türkçe, Pyccкий,       Eληνικά, 日本語, 中文, 한국어, , Dansk
Beep  On Off, On
Installation  Image flip H/V  None None / Rear, Ceiling mounted / Rear /
       Ceiling mounted
    Communication speed  19200bps 4800bps, 9600bps, 19200bps
    Key lock  Off Off, On
    Password  Off Off, On
    Menu color select  Color Color, Monochrome
    Menu display time  45 sec Manual, 5 sec, 15sec, 45 sec
    No signal screen  Blue Blue, Black, Canon logo
   Filter message (LV-7365 only) 500(H)  Off, 100(H), 200(H), 500(H), 1000(H)
Options  Off timer  Off Off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00
    Auto PC adjustment  Normal Off, Normal, Fine
    Direct power on  Off Off, On
    Power management  Off Off, 0:05, 0:10, 0:20, 0:30
    Fan mode  Auto Auto, High, High altitude (LV-7365 only)
   Default source select LV-7365/LV-7265 Last Last, Auto, Computer 1, Computer 2 (Digital), Computer 2 (Analog), VIDEO, S-VIDEO    LV-7260/LV-X7 Last  Last, Auto, Computer, VIDEO, S-VIDEO
    Deinterlace  On Off, On
Input signal select 
Computer 1 (LV-7365/LV-7265) RGB/COMPONENT  RGB/COMPONENT, RGB, COMPONENT   Computer 2 (Analog) (LV-7365/LV-7265) RGB/COMPONENT RGB/COMPONENT, RGB, COMPONENT   Computer (LV-7260/LV-X7) RGB/COMPONENT RGB/COMPONENT, RGB, COMPONENT
    VIDEO  Auto Auto, NTSC3.58, NTSC4.43, PAL, PAL-M,
       PAL-N, PAL60, SECAM
    S-VIDEO  Auto Auto, NTSC3.58, NTSC4.43, PAL, PAL-M,
   PAL-N, PAL60, SECAM
Some menu items are not available depending on the input source.
* The asterisk (*) indicates that the default setting varies depending on the signal. 
						

							

5. Using On-Screen Menu
Information   Item
Usage time  Remaining lamp time
    Lamp counter 
    Filter counter   
Input signal  Source index
    Horizontal frequency   
    Vertical frequency   
    Input signal type  RGB, Component, HDTV, VIDEO, S-VIDEO, HDTV, Digital
    Video type  NTSC, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM,
    Sync type  Separate Sync, Composite Sync, Sync on Green, Sync on video
    Sync polarity
    Scan type  Interlace, Progressive
Version  Model
    Serial number
    Firmware version
    Data version
Reset   Item
Current signal     
All data     
Lamp counter
Filter counter 
						

							
5
5. Using On-Screen Menu
❹ Menu Descriptions & Functions [Image adjustment]
[Image mode]
    
When selecting user adjustable [Image mode], the submenu will be displayed.
You  can  customize  each  gamma  or  color.  To  do  so,  first  select  [Image  mode]  and  press  the  OK  button,  then  pro-
ceed using the following steps.
[Detail settings]
   
Selecting Reference Setting [Reference]
This  option  allows  you  to  adjust  neutral  tint  for  yellow,  cyan  or  magenta.  There  are  five  factory  presets  optimized 
for various types of images, you can set user adjustable settings.
Standard................ Select this to project an image with a similar quality to that of the original image. An image is projected 
with a high regard for reproduction of white.
Presentation  ..........  Select  this  to  project  an  image  with  a  similar  quality  to  that  of  the  original  image.  A  bright  and  high-
contrast image is projected.
Cinema .................. Select this to project a moving picture. A picture is projected with a high regard for color tone repro-
duction.
Video ..................... Select this to project a regular picture such as T V program
sRGB ..................... Select this when you want to project an image from a sRGBcompatible digital camera. An image is pro-
jected in the display mode conforming to the sRGB Standard.
Selecting Gamma Correction Mode [Gamma]
Each mode is recommended for:
Dynamic ................Creates a high-contrast picture.
Natural  ...................Natural reproduction of the picture.
Black detail  ............Emphasizes detail in dark areas of the picture.
Adjusting Color Temperature [Color temperature]
This option allows you to select the color temperature of your choice:
XLow, Low, Mid and High.
NOTE: When [Standard] or [Presentation] is selected in [Reference], [Color temperature] is not available. 
						

							
6
5. Using On-Screen Menu
normal
s tandard
4:3 a spect
When  16:9  is  selected  from 
the  source  (i.e.  DVD  player), 
the  following  selections  will 
display:
normal
16:9 image displayed in 4:3 mode
Wide zoomCinema true size
l eft and right 
stretched l
eft and right stretched
Wide zoomCinema
l eft and right 
stretched l
eft and right stretched to display the true aspect
When  4:3  is  selected  from 
the  source  (i.e.  DVD  play-
er),  the  following  selections 
will display:
Adjusting White Balance [White balance]
This allows you to adjust the white balance. Brightness for each color (RGB) is used to adjust the black level of the 
screen; Contrast for each color (RGB) to adjust the white level of the screen.
Adjusting Brightness, Contrast, Sharpness, Color level and Color balance
You can adjust brightness, contrast, sharpness, color level and color balance.
Brightness  .............Adjusts the brightness level or the black level of the image.
Contrast  .................Adjusts the intensity of the image according to the incoming signal (Wh\
ite level of the image).
Sharpness  ..............Controls the detail of the image for Video (not valid for RGB).
Color level  ..............Increases or decreases the color saturation level (not valid for RGB).\
Color balance  ........Varies  the  color  level  from  +/-  green  to  +/-blue.  The  red  level  is  used  as  reference.  This  adjustment  is 
only valid for Video and Component inputs (not valid for RGB).
Reset
The  settings  and  adjustments  for  [Image  adjustment]  will  be  returned  to  the  factory  settings  with  the  exception  of 
the following; numbers and [Reference] within the [Image mode] screen.
The settings and adjustments under [Detail settings] within the [Image mode] screen that are not currently select-
ed will not be reset.
❺ Menu Descriptions & Functions [Display settings]
Selecting Aspect Ratio [Aspect]
Aspect allows you to select the best Aspect mode to display your source image.
You can also display the Aspect menu by pressing the ASPECT button on the remote control.
True size (RGB only): Turns off the scaling feature. The projector displays the current image in its true resolution. 
						

							
7
5. Using On-Screen Menu
NOTE: 
• When you are displaying an RGB image with a higher resolution than the projector's native resolution, the image will be dis
-
played in the projector’s native resolution. In this case [True size] is not available from the menu.
  Only when displaying an RGB image with a lower resolution than the projector's native resolution, will the image be able to be 
displayed in its true resolution [True size].
  When Computer 2 (Digital) is selected, some options of Aspect Ratio are not available depending on the signal.
•  You can adjust the image position for Cinema aspect. See [Cinema position] for setting the image position.
Copyright
Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue such as 
a coffee shop or hotel and employing compression or expansion of the screen image with a [Aspect] setting may raise concern 
about the infringement of copyrights which are protected by copyright law.
Adjusting the Vertical Position of Image [Cinema position] (for Cinema in Aspect only)
This feature adjusts the vertical position of the image when viewing video with Cinema aspect ratio selected.
When [Cinema] is selected in [Aspect], the image is displayed with black borders on the top and bottom.
You can adjust the vertical position from the top to the bottom of the black area.
NOTE: This option is available only when [Cinema] is selected in [Aspect].
Adjusting Horizontal/Vertical Position, Clock and Tracking (available for RGB signal only)
You  can  adjust  the  image  manually  for  position  and  stability;  [Horizontal  position],  [Vertical  position],  [Clock]  and 
[Tracking].
[Horizontal/Vertical position]
Adjusts the image location horizontally and vertically.
[Clock]
Use this item to fine tune the computer image or to remove any vertical banding that might appear. This function 
adjusts the clock frequencies that eliminate the horizontal banding in the image. This adjustment may be neces-
sary when you connect your computer for the first time. 
[Tracking] 
Use this item to adjust the clock phase or to reduce video noise, dot interference or cross talk. (This is evident 
when part of your image appears to be shimmering.)
Use [Tracking] only after the [Clock] is complete.
NOTE: A projected image may not be displayed correctly during adjustment of [Clock] or [Tracking]. This is normal. 
NOTE: The [Horizontal position] and [Vertical position] options can be adjusted for component signals.
Selecting Video Filter Level [Video filter] (not available for Digital RGB, Video and S-Video)
Select one of the three levels for reducing video noise: Off, Less or More.
Off  .........................The low-pass filter is turned off.
Less  .......................The low-pass filter is applied par tially.
More  ......................The low-pass filter is applied fully.
NOTE: Selecting [Off] will give best image quality by way of higher bandwidth. Selecting [Less] will soften the image and select-
ing. 
						

							
8
5. Using On-Screen Menu
❻ Menu Descriptions & Functions [Setup]
[General]
   
Enabling Auto Keystone [Auto keystone] (LV-7365/LV-7265)
This feature allows the projector to detect its tilt and correct vertical distortion automatically.
To turn off the Auto Keystone feature, select [Off].
Correcting Vertical Keystone Distortion Manually [Keystone adjustment]
You can correct vertical distortion manually.
Saving Vertical Keystone Correction [Keystone save]
This option enables you to save your current keystone settings.
Off ..........................Does not save current keystone correction settings
On  ..........................Saves current keystone correction settings
Saving your change once affects all sources. The changes are saved when the projector is off.
NOTE: When [Auto keystone] is set to [On], [Keystone save] is not available. Next time you turn on the power, the Auto keystone 
function will work and the data stored with [Keystone save] will be invalid.
Selecting Wall Color Correction Mode [Screen color]
This function allows for quick adaptive color correction in applications where the screen material is not white.
The following nine options are available: Off, Greenboard, Greenboard (Gray), Light yellow, Light green, Light blue, 
Sky blue, Light rose and Pink.
LV-7260/LV-X7LV-7365/LV-7265 
						

							
9
LAMP
LAMP
5. Using On-Screen Menu
Selecting Lamp Mode [Lamp mode]
This  feature  enables  you  to  select  two  brightness  modes  of  the  lamp:  Normal  and  Quiet  modes.  The  lamp  life  can 
be extended by using the Quiet mode.
Lamp Mode
Normal Mode
Quiet Mode
Description
This  is  the  default  set ting  (10 0% 
Brightness).
Select  this  mode  to  increase  the 
l a m p  l i f e  ( LV-7 3 6 5:a p p r ox  8 0 % , 
LV-7 2 6 5:  a p p r o x .75% ,  LV-7 2 6 0 /
LV-X7: approx. 80% Brightness).
Status of LAMP indicator
Off
Steady Green light
NOTE: 
• The lamp life remaining and lamp hours used can be checked in [Usage time]. Select [Information] 
→[Usage time].
•  If  the  projector  is  overheated  in  Normal  mode,  there  may  be  a  case  where  the  Lamp  mode  automatically  changes  to  Quiet 
mode  to  protect  the  projector.  This  is  called  “forced  cooling  operation”.  When  the  projector  is  in  a  forced  cooling  operation, 
the picture brightness decreases. When the projector comes back to normal temperature, the Lamp mode returns to Normal 
mode.
Thermometer  symbol  [   ]  indicates  the  lamp  mode  is  automatically  set  to  a  forced  cooling  operation  because  the  internal temperature  is  too  high.  In  this  condition,  changing  [Lamp  mode]  setting  in  the  menu  will  not  affect  the  actual  lamp  mode 
and the LAMP indicator lights green.
Selecting Menu Language [Language]
You can choose one of 21 languages for the on-screen menu.
Enabling Key Sound and Error Sound [Beep]
This  feature  turns  on  or  off  the  keypad  sound  or  alarm  when  a  button  on  the  cabinet  and  the  remote  control  is 
pressed or an error occurs. 
						

							
50
5. Using On-Screen Menu
[Installation]
Selecting Projector Orientation [Image flip H/ V]
This sets your image for your type of projection application. The options are:
front projection, rear projection, ceiling mounted projection and rear ceiling mounted projection.
Selecting Communication Speed [Communication speed]
This feature sets the baud rate of the SERVICE PORT (Mini DIN 8 Pin). It supports data rates from 4800 to 19200 
bps.
The default is 19200 bps.
Select  the  appropriate  baud  rate  for  your  equipment  to  be  connected  (depending  on  the  equipment,  a  lower  baud 
rate may be recommended for long cable runs).
Your selected communication speed will not be affected even when [Reset] is done from the menu.
Disabling the Cabinet Buttons [Key lock]
This option turns on or off the Key Lock function for cabinet buttons.
NOTE:
• The Key lock setting will not affect the remote control or PC control functions.
•  When the cabinet buttons are disabled, pressing and holding the BACK button on the projector cabinet for about 10 seconds 
will change the setting to enable.
•  The Key lock icon will be displayed at the top right of the menu when Key lock is enabled.
NoneRear, Ceiling mounted
RearCeiling mounted
LV-7265/LV-7260/LV-X7LV-7365 
						

							
5
5. Using On-Screen Menu
Enabling Password [Password]
This feature turns on or off the Password function.
Unless the correct password is entered, the projector cannot project an image. (→ page 37)
Selecting Menu Color [Menu color select]
You can choose between two color modes for menu color: color and monochrome.
Selecting Menu Display Time [Menu display time]
This option allows you to select how long the projector waits after the last touch of a button to turn off the menu.
The preset choices are [Manual], [5 sec], [15 sec], and [45 sec].
Selecting a Color for Background [No signal screen]
Use this feature to display a blue, black screen or the Canon logo screen when no signal is available.
Selecting Interval Time for Filter Message [Filter message] (LV-7365 only)
The projector has a feature that informs you of the timing for cleaning the filters.
This  item  allows  you  to  select  the  time  preference  between  displaying  the  message  for  cleaning  the  filters.  Clean 
the filter when you get the message "Please clean filter." (→ page 56)
Five options are available: Off, 100(H), 200(H), 500(H), 1000(H)
The default setting is 500(H). Change the interval time depending on the degree of dust and dirt on the filters.
 
NOTE:
1) The message for lamp replacement and filter cleaning will be displayed under the following conditions:
  - one minute after the projector has been powered on.
  - when the POWER ON/STAND BY button on the projector cabinet or the POWER OFF button on the remote control is pressed.
    To cancel the message, press any button on the projector cabinet or the remote control.
2) Your setting will not be affected even when [Reset] is done from the menu.
[Options]
Setting Off Timer [Off timer]
You can use the Off Timer feature to turn off the projector automatically at a preset time.
Eight preset times can be selected:Off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00 and 16:00.
Setting Auto Adjust [Auto PC adjustment]
Selecting [Normal] or [Fine] will automatically execute Auto PC adjustment function at the time of signal switching.
This feature sets the Auto PC adjust mode so that the analog RGB image can be automatically or manually adjust-
ed for noise and stability. You can automatically make adjustment in two ways: Normal and Fine
Off ..........................The RGB image will not be automatically adjusted.
You can manually optimize the RGB image.
Normal  ...................Default setting. The RGB image will be automatically adjusted. Normally \
select this option.
Fine  ........................Select this option if fine adjustment is needed. It takes more time to switch to the source than when [Nor-
mal] is selected.
LV-7265/LV-7260/LV-X7LV-7365