Canon projector LV7325 User Manual

21
BASIC OPERATION
ADJUSTING THE IMAGE
The message disappears after 4 seconds.
The message disappears after 4 seconds.
ZOOM ADJUSTMENT
1Press the ZOOM WIDE/TELE buttons on the Top Control or the
ZOOM s/tbutton on the Remote Control Unit to turn into the
ZOOM mode.
2Press the ZOOM WIDE button or the ZOOM sbutton to make
the image larger, and press the ZOOM TELE button or the
ZOOM tbutton to make the image smaller.
FOCUS ADJUSTMENT
1Press the FOCUS s/tbutton(s) on the Top Control or on the
Remote Control...

22
BASIC OPERATION
It indicates the level of the volume.
Press the MUTE button to set
the Mute function On or Off.
The display disappears after 4 seconds.  
The message disappears after 4 seconds.
No show
Slide the BRIGHT SWITCH to the BRIGHTER position to enhance
the picture brightness.  When the BRIGHT SWITCH is set to the
BRIGHTER position, the BRIGHT SWITCH INDICATOR lights on.
(P16)  To return the original image, slide the switch to the
STANDARD position.
]When the BRIGHT SWITCH is set to the...

23
COMPUTER / MCIbutton
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select Computer  and
press the SELECT button.  
COMPUTER MODE
SELECTING COMPUTER MODE
DIRECT OPERATION
Select COMPUTER mode by pressing the MODE button on the Top
Control or the COMPUTER / MCI button on the Remote Control Unit.
MENU OPERATION
When selecting the Computer Mode, the Current Mode display
appears.  It shows the information of the computer of the mode
selected.  
CURRENT MODE...

24
COMPUTER MODE
PC ADJUSTMENT
This Projector can automatically tune to the display signals from most personal computers currently distributed.
However, some computers employ the special signal formats which are different from the standard ones and
may not be tuned by Multiscanning of this projector.  If this happens, the projector cannot reproduce a proper
image and the image is recognized as a flickering picture, a non-synchronized picture, a non-centered picture or
a skewed picture.
This projector has...

25
COMPUTER MODE
The number of the total vertical lines.  Adjust the number to match
the image of your personal computer.
Total lines
Recalls the parameter data that was previously
adjusted.Reset
Stores the parameters in the memory.Stored
Clears the parameter data previously set .Mode free
Closes the PC ADJUST Menu.Quit
The number of the total dots in one horizontal period.  Adjust the
number to match the image of your personal computer.
Total dots
Adjustment of the horizontal or vertical picture...

26
COMPUTER MODE
COMPATIBLE COMPUTER SPECIFICATIONS
Basically this projector can accept the signal from all computers with the V, H-Frequency mentioned below and less than
140 MHz of Dot Clock.
NOTE : Specifications are subject to change without notice.
ON-SCREEN
DISPLAYRESOLUTIONH-Freq.
(kHz)V-Freq.
(Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x 48037.5075.00
MAC LC13640 x 48034.9766.60
MAC 13640 x...

27
COMPUTER MODE
PICTURE IMAGE ADJUSTMENT
Press the MENU button and the ON-SCREEN MENU will
appear.  Press the POINT LEFT/RIGHT buttons to select
IMAGE  and press the SELECT button.  Another dialog box
PICTURE IMAGE ADJUSTMENT Menu will appear. 
Press the POINT DOWN button and a red-arrow icon will
appear.  Move the arrow to the item that you want to change by
pressing the POINT UP/DOWN buttons.  To change the value,
press either the POINT RIGHT button or the POINT LEFT
button.
1
2
ADJUST PICTURE IMAGE...

28
COMPUTER MODE
The Auto Image function is provided to automatically adjust Fine
sync., Total dots, and Picture Position for most computers.
Press the MENU button and the ON-SCREEN MENU will
appear.  Press the POINT LEFT/RIGHT buttons to select
AUTO IMAGE  and press the SELECT button.  
Another dialog box AUTO IMAGE Menu will appear. 
Move the arrow to an item that you want to adjust by pressing
the POINT UP/DOWN button.  Change the setting On or Off by
pressing the SELECT button.  
1
2
AUTO IMAGE...

29
COMPUTER MODE
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to display the image in desirable size.
Press the MENU button and the ON-SCREEN MENU will
appear.  Press the POINT LEFT/RIGHT buttons to select
SCREEN  and press the SELECT button.  Another dialog
box PICTURE SCREEN Menu will appear.1
Move the arrow to the
function and  press the
SELECT button.
Press the POINT DOWN button and a red-arrow icon will
appear.  Move the arrow to the function that...

30
VIDEO MODE
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select Video  and
press the SELECT button.  
SELECTING VIDEO MODE
DIRECT OPERATION
Select VIDEO mode by pressing the MODE button on the Top
Control or the VIDEO button on the Remote Control Unit.
MENU OPERATION
SELECTING COLOR SYSTEM
Press the MENU button and the ON-SCREEN MENU will
appear.  Press the POINT LEFT/RIGHT buttons to select
SYSTEM and press the SELECT button.  Another dialog box
VIDEO...