Canon projector LV7320 User Manual

							S-VIDEO
R-AUDIO-L(MONO)VIDEOAUDIO
IN
OUT
CONTROL PORT
COMPUTER IN
MONITOR OUT
11
CONNECTING THE PROJECTOR
CONNECTING TO THE VIDEO EQUIPMENT
Video Source (example)
Video Cassette Recorder Video Disc Player
Video Audio Cable ]S-VIDEO Cable ]
Audio Amplifier Audio Speaker
(stereo) External Audio Equipment
Audio Cable (Stereo) ]
Terminals 
of the Projector
Use either the VIDEO jack
or the S-VIDEO jack.
When the both jacks are
connected, the S-VIDEO
jack has priority over the
VIDEO jack. Video / Audio Output S-VIDEO Output
Audio Input• VIDEO CABLE ]
• S-VIDEO CABLE ]
• AUDIO CABLE (stereo) ]
]
These cables are not supplied
with this projector.
Cables used for connection
NOTE :
When connecting the cable, the power cords of
both the projector and the external equipment
should be disconnected from AC outlet.  Turn the
projector and peripheral equipment on before the
computer is switched on. 
						

							12
CONNECTING THE PROJECTOR
ON
12
34
56DIP
CONNECTING TO THE COMPUTER
To connect to the computer, refer to the figure below.
IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / SXGA)
VGA Cable 
Monitor Output  Desktop type
Laptop type
Monitor
Audio Speaker
(stereo)
Audio Amplifier
Control Cable for Serial Port ]
Control Cable for PS/2 Port Audio Cable (stereo) 
]
Monitor Cable ]
Terminal Terminal Serial port PS/2 port Audio Output Audio InputTo each terminal of your computer
To the Monitor
NOTE :When connecting the cable, the power cords of both the projector and the external equipment should be disconnected
from AC outlet.  Turn the projector and peripheral equipment on before the computer is switched on.
MAC Adapter ]
Set the slide
switches following
the chart on the
next page.
Terminal ADB port
Control Cable for ADB Port ]
• VGA CABLE 
• CONTROL CABLE FOR PS/2 PORT 
• CONTROL CABLE FOR SERIAL PORT,or ADB PORT 
]
• MAC ADAPTER ]
• MONITOR CABLE ]
• PC AUDIO CABLE (stereo)]
]
These cables are not supplied with this projector.
Cables used for connection 
						

							13
CONNECTING THE PROJECTOR
S-VIDEO
R-AUDIO-L(MONO)VIDEOAUDIO
IN
OUT
CONTROL PORT
COMPUTER IN
MONITOR OUT
ON
1DIPON
OFF
23456
13 MODE (640 x 480)
16 MODE (832 x 624)
19 MODE (1024 x 768)OFF ON ON
ON ON
ON ONOFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
1234 56
OFF OFF ON ON ON ON 21 MODE (1152 x 870)
CONTROL
PORTAUDIO
OUT AUDIO
IN MONITOR
OUT COMPUTER
IN
Use one of these Control
Cables corresponding
with the terminal of your
computer.Set the switches as shown
in the table below depend-
ing on the RESOLUTION
MODE that you want to
use before your turn on the
projector and computer.
uMAC ADAPTER (Not supplied) 
						

							14
BEFORE OPERATION
OPERATION OF THE REMOTE CONTROL
VOLUME
POWER
FOCUS
ZOOMVIDEO
COMPUTER
D.ZOOM
MENUMUTE
LASER
KEY STONENO SHOWFREEZE
AUTO IMAGENORMAL
ON
ALL OFF
ALL-OFF SWITCH
When using the Remote Control
Unit, turn this switch to “ON” and
turn it “ALL OFF” when it is not
used.
This remote control emits a laser beam as the Laser Pointer from the Laser Light Window.  When the LASER button is
pressed, the laser light goes on.  And when the button is pressed more than 1 minute or the button is released, light goes off.
Laser light is emitted with the RED light which tells the laser beam being emitted.
The laser emitted is a class IIlaser; therefore, do not look into the Laser Light Window or shine the laser beam on yourself or
other people.  The three marks below are the caution labels for the laser beam.
CAUTION:  Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
Laser Light Window
These caution labels are put on the remote control.
LASER POINTER FUNCTION
Left Side
Used to select COMPUTER
output source.  (P22)
Used to select VIDEO
source.  (P29)
Used to execute the item
selected or to expand the
image in DIGITAL ZOOM
mode. (P28)
It is also used as a PC mouse
in Wireless Mouse Operation.
(P32)
POWER ON-OFF BUTTON
Used to turn the projector on
or off.  (P19)
MENU BUTTON
Used to select MENU
operation.  (P17, 18)
SELECT BUTTON
VIDEO BUTTON
COMPUTER BUTTON
LASER BUTTON
Used to operate the laser
pointer function.  The laser
beam is emitted while
pressing this button within 1
minute.  When using the laser
pointer for more than 1
minute, release the button and
press it again.
Used to move the pointer on
the MENU, to adjust the item,
or to pan the image in DIGITAL
ZOOM mode.  (P28)
It is also used as a PC mouse
in Wireless Mouse Operation.
(P32)
]When pressing the center of this
button, it works as the SELECT
button.
POINT BUTTON
Used to compress the image
in DIGITAL ZOOM mode.
(P28)
It is also used as a PC mouse
in Wireless Mouse Operation.
(P32)
RIGHT CLICK BUTTON 
						

							15
BEFORE OPERATION
VOLUME
POWER
FOCUS
ZOOMVIDEO
COMPUTER
D.ZOOM
MENUMUTE
LASER
KEY STONENO SHOWFREEZE
AUTO IMAGENORMAL
To insure safe operation, please observe the following precautions :
lUse (2) AA type alkaline batteries.
lReplace two batteries at the same time.
lDo not use a new battery with a used battery.
lAvoid contact with water or liquid.
lDo not expose the Remote Control Unit to moisture, or heat.
lDo not drop the remote control unit.
lIf batteries have leaked on the remote control, carefully wipe the case clean and install new batteries.
Press the lid down-
ward and slide it.
Remove the battery
compartment lid.Slide the batteries into the
compartment.Replace the compartment
lid.
Two AA size batteries
For correct polarity (+
and –), be sure the
battery terminals are in
contact with the pins in
the compartment.
REMOTE CONTROL BATTERY INSTALLATION
123
Operating Range 
Point the remote control toward the
projector (Receiver Window) when
pressing the buttons.  Maximum
operating range for the remote
control is about 16.4’ (5m) and 60°
front and rear of the projector
60°
60°
MUTE BUTTON
Used to mute sound.(P21)
ZOOM BUTTON
Used to adjust zoom.
(P20)
FOCUS BUTTON
Used to adjust focus.
(P20)
NO SHOW BUTTON
Used to turn the picture
into a black image.  (P21)
AUTO IMAGE BUTTON
Use to operate AUTO
IMAGE function.  (P27)
VOLUME BUTTON
Used to adjust volume.
(P21)
D.ZOOM BUTTON
Used to turn the projector
into DIGITAL ZOOM
mode and resize the
image. (P28)
KEYSTONE BUTTON
Used to correct the
keystone distortion.
(P20, 28, 29)
FREEZE BUTTON
Used to freeze the picture.
(P21)
NORMAL BUTTON
Used to reset to normal
picture adjustments preset
by the factory. (P26, 30)
16.4’
(5 m)
16.4’
(5 m) 
						

							POWER
NORMALMENU MODEAUTO IMAGE
FOCUSZOOM
VOLUME
KEYSTONE
LAMP
REPLACEWARNING
TEMP.READYLAMP
WIDE
TELESELECT
BRIGHT
16
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
Used to open or close the
MENU operation. 
(P17, 18)
MENU BUTTON
AUTO IMAGE BUTTON
READY INDICATOR
POWER ON–OFF BUTTON
WARNING TEMP. INDICATORLAMP INDICATORLAMP REPLACE INDICATOR
Used to operate AUTO
IMAGE function.  (P27)
This indicator is lit in green
when the projector is ready
to be turned on.This indicator is dim when
the projector is turned on.
And bright when the
projector is in stand-by
mode.This indicator turns to
yellow when the life of the
projection lamp draws to an
end.  (P34)This indicator flashes red
when internal projector
temperature is too high.
(P33)
Used to turn the projector
on  or off.  (P19)
Used to select zoom adjust.
(P20)
MODE BUTTON
SELECT BUTTON
FOCUS BUTTONS
NORMAL BUTTON
VOLUME BUTTON
POINT BUTTONS
Used to select input source
among Computer, or Video.
(P22, 29)
Used to select focus adjust.
(P21)
Used to adjust volume.
(P21)
Used to reset to normal
picture adjustment preset
by factory.  (P26, 30)
Used to select an item  and
adjust the value on the
MENU.  It is also used to
pan the image in DIGITAL
ZOOM mode. (P28)
Used to execute the item
selected.  It is also used to
expand the image in
DIGITAL ZOOM mode. 
(P28)
ZOOM BUTTONS
KEY STONE BUTTON
Used to correct the
keystone distortion.
(P20, 28, 29)
BRIGHT SWITCH INDICATOR
This indicator lights when
the BRIGHT SWITCH is set
to BRIGHTER.  (P21) 
						

							17
SELECT
BEFORE OPERATION
HOW TO OPERATE ON-SCREEN MENU
FLOW OF ON-SCREEN MENU
Display ON-SCREEN MENU
Press MENU button to display the ON-SCREEN MENU
(MENU BAR).  The red frame is the POINTER.
Select the ITEM by pressing SELECT button.  The
dialog box of the ITEM appears.
Move the POINTER (red frame) to the ITEM ICON that
you want to select by pressing POINT RIGHT/ LEFT
buttons.
Move the POINTER to the ITEM that you want to adjust
and adjust the ITEM by pressing SELECT button.
Refer to the following pages for details of respective
adjustments.
Move the POINTER downward by pressing POINT
DOWN button.  (The shape of the POINTER becomes
an arrow.)  
Select the Item
Control and adjust through ON-SCREEN MENU
1
2
3
5
4
You can control and adjust this projector through the
ON-SCREEN MENU.  Refer to the following pages to
operate each adjustment on the ON-SCREEN MENU.
1  MOVING THE POINTER
2  SELECT THE ITEM
Move the pointer (see the NOTE below) by pressing POINT
button(s) on the TOP CONTROL or the REMOTE CONTROL.
Select the item by pressing SELECT button.
SELECT
BUTTON
POINT
DOWN
BUTTON
MENU BAR
POINTER
(red frame)ITEM ICON
POINTER
(red frame)
MENU
POINTER
Used to select the item.SELECT BUTTON
Used to move the
Pointer UP/ DOWN/
RIGHT/ LEFT.POINT BUTTONS
Used to select the item.SELECT BUTTON
Used to move the
Pointer UP/ DOWN/
RIGHT/ LEFT.POINT BUTTON
WIRELESS REMOTE CONTROL
TOP CONTROL
OPERATING ON-SCREEN MENU
NOTE : Pointer is the icon on the ON-SCREEN Menu to
select the item.  See the figures on the section
FLOW OF ON-SCREEN MENU below. 
						

							18
BEFORE OPERATION
MENU BAR
IMAGE MENU
Used to adjust  the
computer image. [Fine
sync. / Total dots /
White Balance /
Contrast / Brightness]
(Refer to P26)
PC ADJUST MENU
Used to adjust the
parameters to
match with the input
signal format.
(Refer to P24, 25)
SETTING MENU
Used to set the Display
Menu and to reset
Lamp Replacement
Monitor Timer.
(Refer to P31)MODE MENU
Used to select
the  Computer
input mode.
(Refer to P22)
SCREEN MENU
Used to adjust the
size of the image
or to correct the
Keystone
distortion.
(Refer to P28)
MENU BAR IN COMPUTER MODEPress MENU BUTTON while in Computer mode.
SYSTEM MENU
Used to select a
color system among
[
PAL, SECAM, NTSC,
NTSC 4.43, PAL-M and
PAL-N
].  
(Refer to P29)
IMAGE MENU
Used to adjust the
picture image.  [Color /
Tint / White Balance /
Contrast / Brightness/
Sharpness
]
(Refer to P30)
SCREEN MENU
Used to set the size
of the image either
Regular or  Wide,
or to correct the
Keystone distortion.
(Refer to P29)
MENU BAR IN VIDEO MODEPress MENU BUTTON while in Video mode.
These icons have the same
function as the Computer Mode.
LANGUAGE MENU
Used to select
the language
used in the
Menu.  
(Refer to P31)
MODE MENU
Used to select
the Video input.
(Refer to P29)
POSITION MENU
Used to adjust
the position of
the image.
(Refer to P27)
AUTO IMAGE MENU
Used to adjust Fine
sync., Total dots,
and Picture Position
automatically.
(Refer to P27)
SYSTEM MENU
Used to select
a computer
system.
(Refer to P22) 
						

							19
BASIC OPERATIONS
TURNING ON THE PROJECTOR
Connect the projectors AC power cord into a wall outlet.  The
LAMP indicator lights RED, and the READY indicator lights
GREEN.
Press the power ON-OFF button on the Remote Control Unit or
on  the Top Control to ON.  The LAMP POWER indicator dims,
and the Cooling Fans start to operate.  The Preparation Display
appears on the screen and the count-down starts.  The signal
from the source appears after 30 seconds.
2
3
TURNING OFF THE PROJECTOR
Press the power ON-OFF button on the Remote Control Unit or
on the Top Control, and the message Power off? appears on
the screen.  
Press the power ON-OFF button again to turn off the projector.
The LAMP indicator lights bright and the READY indicator turns
off.  The Cooling Fans operate for 90 seconds after the
projector is turned off.  (During this Cooling Down period, this
appliance cannot be turned on.) 
1
2
TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN IT ON, WAIT AT LEAST 5
MINUTES BEFORE TURNING IT OFF.
Power off?
The message disappears after 4 seconds.
TURNING ON / OFF THE PROJECTOR 
When the TEMPERATURE WARNING indicator flashes red, the projector is automatically turned off.  Wait
at least 5 minutes before turning the projector on again.
If the TEMPERATURE WARNING indicator continues to flash, follow procedures below:
1. Disconnect the AC power cord from the AC outlet.
2. Check the air filters for dust accumulation.
3. Clean the Air Filter.  (See AIR FILTER CARE AND CLEANING section on page 33.)
4. Press the power ON-OFF button to ON.
If the TEMPERATURE WARNING indicator still continues to flash, call your authorized dealer or service
station.
1Complete the peripheral connections (with Computer, VCR,
etc.) before turning on the projector.  (Refer to CONNECTING
TO THE PROJECTOR on pages 10~13 for connecting that
equipment.
3When cooling the projector has finished, the READY indicator
turns to green again and you can turn the projector on.  After
cooling down completely, disconnect the AC power cord.
30
The Preparation Display disappears after 30 seconds.
NOTE : The Cooling Fan may work for cooling while the projector is turned off.  When the Cooling
Fan is working, TEMPERATURE WARNING INDICATOR flashes red. 
						

							20
BASIC OPERATION
ADJUSTING THE IMAGE
The message disappears after 4 seconds.
The message disappears after 4 seconds.
ZOOM ADJUSTMENT
1Press the ZOOM WIDE/TELE button(s) on the Top Control or
the ZOOM s/tbutton on the Remote Control Unit to turn into
the ZOOM mode.
2Press the ZOOM WIDE button or the ZOOM sbutton to make
the image larger, and press the ZOOM TELE button or the
ZOOM tbutton to make the image smaller.
FOCUS ADJUSTMENT
1Press the FOCUS s/tbutton(s) on the Top Control or on the
Remote Control Unit to turn into the FOCUS mode.
2Adjust the focus of the image by pressing the FOCUS s/t
button(s).
KEYSTONE ADJUSTMENT
1Press the KEYSTONE button on the Top Control or the
KEYSTONE s/tbutton on the Remote Control Unit or select
the Keystone on the SCREEN menu.  (Refer to page 28, 29.)
The message “Keystone” is displayed.
2Correct the Keystone distortion by pressing the KEYSTONE
s/tbutton or the POINT UP/DOWN button(s).  Press the
KEYSTONE sbutton or the POINT UP button to reduce the
upper part or the image, and press the KEYSTONE tbutton or
the POINT DOWN button to reduce the lower part.  
The message disappears after 4 seconds.
Reduce the upper width with the KEY STONE s
button or the POINT UP button.  
Reduce the lower width with the KEY STONE t
button or the POINT DOWN button.  
In the Computer mode, the image can be expanded, compressed,
and panned with the Digital Zoom function.  Refer to page 28 for the
Digital Zoom operation.
Zoom
Focus
Keystone
If the picture has keystone distortion, correct image with KEYSTONE adjustment.