Canon projector LV7210 User Manual

31
Computer Input
This projector has a picture screen resize function, which enables you to display the desirable image size.
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Screen Menu icon.
When the Digital zoom + is selected, the On-Screen Menu disappears
and the message “D. Zoom +” is displayed.  Press the SET button to
expand the image size.  And press the Point Up/Down/Left/Right
button to pan the image.  The Panning...

32
Video Input
Choose Video by pressing the INPUT button on the top control or the
VIDEO button on the remote control unit.
Before using these buttons, correct input source should be selected
through menu operation as described below.
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Input Menu icon.
Press the Point Down button to move the red arrow pointer to
Video and then press the SET button.  The Source Select Menu
will...

33
Video Input
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Input Menu icon.1
Press the Point Down button to move the red arrow pointer to
either Computer 1 or Computer 2 (Only the Computer 1 is
displayed when Monitor out is selected in the Setting Menu.),
and then press the SET button.  The Source Select Menu will
appear.   2
Move the pointer to the correct input source and then press the
SET button.3
Move the pointer...

34
Video Input
AV System Menu (Video or S-Video)
AV System Menu (Component)
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the AV System Menu icon.
Press the Point Down button to move the red arrow pointer to
the system that you want to select and then press the SET
button.
1
2
If the projector cannot reproduce proper video image, it is necessary
to select a specific broadcast signal format among PAL, SECAM,
NTSC, NTSC 4.43,...

35
Video Input
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Image Select Menu icon.1
2Press the Point Down button to move the red frame pointer to
the level that you want to set and then press the SET button.
Move the red frame pointer to a level
and press the SET button.
The level being selected.
Image Select Menu
Normal picture level preset on this projector.Standard
Picture level adjusted for the picture with fine...

36
Video Input
Press the Point Left/Right but-
ton to adjust value.
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Image Adjust Menu icon.1
2Press the Point Down button to move the red frame pointer to
the item that you want to adjust and then press the SET button.
The level of each item is displayed.  Adjust each level by
pressing the Point Left/Right button.
Move the red frame pointer to
the item to be selected and
then...

37
Video Input
This projector has a picture screen resize function, which enables you to display the desirable image size.
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Screen Menu icon.
Press the Point Down button and move the red frame pointer to
the function that you want to select and then press the SET
button.
1
2
Move the red frame to a function and
press the SET button.
Screen Menu
Screen Menu icon
Provides image at...

38
Setting
Keystone
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Setting Menu icon.1
2
Language
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean, or Japanese.
Display
This function decides whether to display On-Screen Displays.
On ····shows all the On-Screen Displays.
Off ····does not show On-Screen Displays except;...

39
Setting
Terminal
The RGB IN-2/ COMPONENT IN/ RGB OUT terminal on the back of
the projector can be used as computer input or monitor output by
switching Terminal with the Point Left/Right button.  
To use the terminal as computer input, Component video input, or
RGB Scart 21-Pin Video input, select Computer 2.  To use the terminal
as monitor out, select Monitor out.
Terminal cannot be switched into Monitor out after selecting
Computer 2.  In this case, select other input source such as Computer
1 or...

40
Setting
This function is used to reset the lamp replace counter.  When
replacing the projection lamp, reset the lamp replace counter by
using this function.  See page 44 for operation.Lamp counter reset Remote control
This projector provides eight different remote control codes (Code 1-
Code 8); the factory-set, initial code (Code 1) and the other seven
codes (Code 2 to Code 8).  This switching function prevents remote
control unit interference when operating several projectors or video
equipment at...