Canon projector LV7105 User Manual

E
English
Multimedia Projector
Owner’s Manual
LV-7105 

2
Before operating this projector, read this manual thoroughly and operate the projector properly.  
This projector provides many convenient features and functions.  Operating the projector properly enables you to
manage those features and maintains it in better condition for a considerable time.
Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this manual again, check...

3
SAFETY INSTRUCTIONS
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use.  Unplug this projector from AC power supply before
cleaning.  Do not use liquid or aerosol cleaners.  Use a damp
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time,...

4
COMPLIANCES
Federal Communication Commission Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of FCC Rules.  These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference...

5
TABLE OF CONTENTS
FEATURES AND DESIGN 6
BEFORE OPERATION 14COMPUTER MODE 22
VIDEO MODE 29
SETTING 32
APPENDIX 34 PREPARATION 7
NAME OF EACH PART OF THE PROJECTOR 7
SETTING-UP THE PROJECTOR 8
CONNECTING THE AC POWER CORD 8
POSITIONING THE PROJECTOR 9
ADJUSTABLE FEET 9
MOVING THE PROJECTOR 10
CONNECTING THE PROJECTOR11
TERMINALS OF THE PROJECTOR 11
CONNECTING TO THE VIDEO EQUIPMENT 12
CONNECTING TO THE COMPUTER 13
OPERATION OF THE REMOTE CONTROL 14
OPERATING RANGE 14
REMOTE CONTROL BATTERIES INSTALLATION...

6
FEATURES AND DESIGN
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of
use.  The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal
display (LCD) technology.
Compatibility
This projector widely accepts various video and
computer input signals including;
Computers
IBM-compatible and Macintosh computers up
to 1280 x 1024 resolution.
6 Color Systems
NTSC, PAL, SECAM, NTSC 4.43, PAL-M...

7
PREPARATION
NAME OF EACH PART OF THE PROJECTOR
These Air Intake Vents
should not be blocked.
BOTTOM OF THE CABINET
BACK OF THE CABINET
POWER CORD CONNECTOR
FRONT OF THE CABINET
LAMP COVER
ADJUSTABLE FEET
AND 
FEET LOCK LATCHES
PROJECTION LENS
SPEAKER 
(Monaural)
INFRARED 
REMOTE RECEIVER
LENS COVER
This projector is equipped with cooling
fans for protection from overheating.
Pay attention to the following to ensure
proper ventilation and avoid a possible
risk of fire and malfunction.
Do not cover the...

SETTING-UP THE PROJECTOR
8
PREPARATION
This projector uses nominal input voltages of 100-120 V
or 200-240 V AC.  The projector automatically selects the
correct input voltage.  It is designed to work with single-
phase power systems having a grounded neutral
conductor.  To reduce the risk of electrical shock, do not
plug into any other type of power system.
Consult your authorized dealer or service station if you
are not sure of the type of power supply being in use.
Connect the projector with the...

9
PREPARATION
POSITIONING THE PROJECTOR
This projector is designed to project on a flat
projection surface.
The projector can be focused from 5.2’(1.6m) ~
26.3’(8.0m).
Refer to the figure below to adjust the screen size.
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by
rotating the ADJUSTABLE FEET.  Projection angle can
be adjusted to 7.6 degrees. 
Lift the front of the projector and pull the FEET LOCK
LATCHES on both sides of the projector.1
ADJUSTABLE FEET
FEET LOCK
LATCHES
H1...

10
PREPARATION
When moving the projector, replace the lens cover and retract the feet to prevent damage to the lens and
cabinet.  When this projector is not in use for an extended period, put it into the case (carrying bag) supplied
with this projector. 
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
Do not drop or bump the projector, otherwise damages or malfunctions may result.
When carrying the projector, use a suitable carrying case.
Do not transport the projector by using a courier or...