Canon Projector LV-7490 User Manual

Computer	Input
31
Computer	Input
Auto PC Adjustment function is provided to automatically adjust Fine	sync, Total	dots, Horizontal	position and Vertical position to conform to your computer.
PC	adjust	Menu
Auto	PC	Adjustment
To	store	adjustment	parametersThe adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode	(1–10) in the PC System Menu (p.30). See also “Store” on page 33.
Note: • Fine	sync,...

32
Computer	Input
PC	adjust	Menu
Manual	PC	Adjustment
Some computers employ special signal formats which may not be tuned by M\
ulti-scan system of this projector.  Manual PC Adjustment enables you to precisely adjust several parameters to match t\
hose signal formats. The projector has 10 independent memory areas to store those parameters \
manually adjusted. It allows you to recall the setting for a specific computer. 
1
2
Use the Point ◄► buttons to adjust the value, eliminating a flicker from the...

Computer	Input
33
Computer	Input
Store
To store the adjusted data, select	Store	and then press the Point ► button or the OK button. Move the highlight to one of the Modes 1 to 10 in which you want to store, and then press the OK button.
Mode	free
To clear the stored data, select Mode	free and then press the Point ► button or the OK button. Move the highlight to the Mode that you want to clear and then press the OK button.
Note: • Display	area	(H/V)	cannot be selected when 480i, 575i, 480p, 575p, 720p,...

34
Computer	Input
Image	select	Menu
IMAGE	button
Presentation
High	contrast
User 1
User 2
User 3
Image	Mode	Selection	
User 4
Blackboard(Green)
Standard
Remote	controller
IMAGE	button
Select the desired image mode among Presentation, Standard, High	contrast, Cinema, Blackboard	(Green), Colorboard, User 1, User 2, User 3 and User 4 by pressing the IMAGE button on the remote controller.
Standard
Picture mode with improved halftone for graphics.
High	contrast
Blackboard	(Green)
User	1-4
For the image...

Computer	Input
35
Computer	Input
Image	Adjust	Menu
Image	Adjustment
Reset
Press the MENU button to display the On-Screen Menu.  Use the Point ▲▼ buttons to select Image	adjust and then press the Point ► button or the OK button.
1
2Use the Point ▲▼ buttons to select the desired item and then press the OK button to display the adjustment dialog box.  Use the Point ◄► buttons to adjust the setting value.
Note:• When White balance Red, Green or blue is    adjusted, Color	temp. will change to User.• When...

36
Computer	Input
Aspect	Setting	
Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Aspect and then press the Point ► button or the OK button.
Use the Point ▲▼ buttons select the desired item and then press the OK button.
This projector has the picture screen resize function, which enables you\
 to customize the image size.
Aspect	Menu
Provide the image to fit the screen size.Normal
TrueProvide  the  image  in  its  original  size.  When  the original    image  size...

Computer	Input
37
Computer	Input
Select Digital	zoom	+. The On-Screen Menu disappears and D.	zoom	+ appears. Press the OK button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM + or the OK button. 
To exit the Digital zoom +/– mode, press any button except the D.ZOOM +/– buttons, OK and Point buttons.
Digital	zoom	+
Select Digital	zoom	–....

38
VIDEO	Input
Choose VIDEO or S-VIDEO by pressing the INPUT button on the top control, or the VIDEO or the S-VIDEO button on the remote controller.Before using these buttons, correct input source should be selected through menu operation as described below.
1
2
VIDEO
Input	Source	Selection	(VIDEO,	S-VIDEO)
Direct Operation
When video input signal is connected to the VIDEO jack, select VIDEO.
VIDEO
S-VIDEO
Note:   When  the Auto  input  function  is  set  to On  1  or On 2  in  the Auto  setup...

39
VIDEO	InputVIDEO	Input
Choose COMPUTER	1(COMPONENT) or COMPUTER	1	(SCART) by pressing the COMPONENT or the COMPUTER 1 button on the remote controller.Before using these buttons, correct input source should be selected thro\
ugh Menu operation as described below.
1
Input	Menu
2Use the Point ▲▼ buttons to select COMPUTER 1 and then press the Point ► button.
Input	Source	Selection	(COMPONENT,	SCART)
When the input source is coming from video equipment connected to the COMPUTER IN 1/S-VIDEO IN/COMPONENT...

40
VIDEO	Input
VIDEO	System	Selection
1AV	System	Menu	(VIDEO	or	S-VIDEO)
AV	System	Menu	(COMPONENT)
2
If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC	4.43, PAL-M and PAL-N.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.
If the projector cannot reproduce proper video image, select a specific component video signal format from...