Canon Projector LV-7365 User Manual

2
. Introduction
❷ Introduction to the Projector
This section introduces you to your new projector and describes the features and controls.
Congratulations on Your Purchase of The Projector
The LV-7365/LV-7265/LV-7260/LV-X7 is one of the very best projectors available today. The projector enables you 
to  project  precise  images  up  to  300  inches  across  (measured  diagonally)  from  your  PC  or  Macintosh  computer 
(desktop or notebook), VCR, DVD player, document camera, or a laser disc...

3
About this user's manual
The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to 
review  the  user's  manual.  This  may  save  you  time  later  on.  At  the  beginning  of  each  section  of  the  manual  you'll 
find an overview. If the section doesn't apply, you can skip it.
• Microsoft,  Windows,  Windows  Vista,  and  PowerPoint  are  trademarks  or  registered  trademarks  of  Microsoft 
Corporation in the U.S. and...


❸ Part Names of the Projector
MENUBACKKEYSTONE
WARNING    POWER AUTO PCINPUTLAMP
-+VOLVOL
MENUBACKKEYSTONE
WARNING    POWER AUTO PCINPUTVOL-VOL+
LAMP
AUDIO INAUDIO OUTANALOG IN-1DIGITAL IN /ANALOG IN-2
S-VIDEOINVIDEOINSERVICE  PORTRLAUDIO IN
Zoom l ever
( s ee page 28)Controls
(s ee page 6)
l ens
lens Cap
Be sure to remove the lens cap during 
projection. t he cap can deform or fire 
can occur.
Built-in security slot (  )*
focus r ing
( s ee page 28)
adjustable t ilt foot l ock Button
( s ee page...

5
. Introduction
Bottom
a djustable t ilt foot
( s ee page 27)
adjustable t ilt foot l ock Button
( s ee page 27) l
amp Cover
( s ee page 
58)
r
ear f oot (left / r ight)
HINT: The Canon logo is on the panel of the projector cabinet . When projecting an image with the projector hung from the ceil-
ing, turn the Canon logo upside down.
To turn the logo upside down, follow the steps below.
1.	 Push	one	end	of	the	logo	gently.
  the other end will pop up slightly.
•  t he right drawing shows the part...

6
. Introduction
Top Features
MENU
BACK
KEYSTONE
WARNING
    POWER 
AUTO PC
INPUT
VOL-VOL+
LAMP
3
4
1
5 8
92106
7
 .  POWER Button (  )
Use  this  button  to  turn  the  power  on  and  off  when 
the  main  power  is  supplied  and  the  projector  is  in 
standby mode.
To  turn  on  the  projector,  press  and  hold  this  button 
for  about  1  second.  To  turn  off  the  projector,  press 
this button twice.
2.  POWER Indicator
When this indicator is green, the projector is on; when 
this...

7
. Introduction
AUDIO IN
AUDIO OUT
S-VIDEOIN
VIDEOIN
L
AUDIO IN
RSERVICE PORT
ANALOG IN-1
DIGITAL IN /ANALOG IN-2
973128
456
Terminal Panel Features
 . Computer   Input Connector [ANALOG IN- ] (Computer 
Input  Connector  [ANALOG  IN]  on  LV-7260/LV-X7)  (Mini 
D-Sub  5 Pin)
Connect your computer or other analog RGB equip-
ment  such  as  IBM  compatible  or  Macintosh  com-
puters.  Use  the  supplied  VGA  cable  to  connect  to 
your  computer.  This  also  ser ves  as  a...

8
. Introduction
❹ Part Names of the Remote Control
 .  Infrared Transmitter
  Direct the remote control toward the remote sensor 
on the projector cabinet.
2.  POWER Button
  When the main power is on, you can use this button 
to turn your projector on.
NOTE: To turn on the projector, press and hold the POWER 
button for about 1 second.
 You can use this button to turn your projector off.
NOTE: To turn off the projector, press this button twice.
3.  INFO. Button
  Provides  the  information...

9
BACK
R-CLICKL-CLICK
VOL
FREEZE
D.ZOOMPAGE
MENU
POWER
RD-428E
INPUTIMAGE
ASPECT
INFO.
NO SHOW
AUTO PC
1
2
46
78
3
5
13
11
15
14
12
17
1816
9
10
. Introduction
 . OK Button
  Use  this  but ton  to  enter  your  menu  selec tion.  It 
works  the  same  way  as  the  OK  button  on  the  cabi-
net. See page 6.
 2.  BACK Button
  It  works  the  same  way  as  the  BACK  button  on  the 
cabinet. See page 6.
 3.  L-CLICK Button
  (This button cannot be used for LV-X7.)
  This...

0
. Introduction
Remote Control Precautions
•  Handle the remote control carefully.
•  If the remote control gets wet, wipe it dry immediately.
•  Avoid excessive heat and humidity.
•  Do not heat, take apart, or throw batteries into fire.
•  Ensure that you have the batteries' polarity (+/-) aligned correctly.
•  If you will not be using the remote control for a long time, remove the batteries.
•  Do not place the batteries upside down.
•  Do not use new and old batteries together, or use...


This section describes how to set up your projector and how to connect video and audio sources.
2. Installation and Connections
Your projector is simple to set up and use. But before you get started, you must first:
① Set up a screen and the projector. See page 12, 13.
② Connect your computer or video equipment to the projector. See pages 15, 16, 17, 18, 19, 20, 21, 22.
③ Connect the supplied power cord. See page 23.
NOTE: Ensure that the power cord and any other cables are disconnected...