Canon Projector LV-7365/LV-7265/LV-7260/LV-X7 User Manual

32
❼ Turning off the Projector
To turn off the projector:
3. Projecting an Image (Basic Operation)
MENU
BACK
KEYSTONE
WARNING    POWER 
AUTO PC
INPUT
VOL-VOL+
LAMP
POWER
INPUTIMAGE
ASPECT
INFO.
MENUNO SHOW
AUTO PC1.	 Press	the	POWER	 button	on	the	 projector	 cabinet	or	
the	 remote	 control.	 The	“Push	 POWER	 button	again	
to	turn	off	power.”	message	will	appear.
WARNING
LAMP
    WARNING
LAMP
WARNING
LAMP
        
Power OnFan runningStandby
Steady green lightBlinking orange lightSteady orange light...

33
❽ After Use
Preparation: Make sure that the projector is turned off.
1.	 Unplug	the	power	cord.
2.	 Disconnect	any	other	cables.
3.	 Retract	adjustable	tilt	feet	if	extended.
4.	 Cover	the	lens	with	the	lens	cap.
5.	 Put	the	projector	and	its	accessories	in	the	supplied	soft	case.
 Place  the  projector  in  the  soft  case  with  the  lens  facing  upward  as  shown  below.  this  is  to  prevent  the  lens 
from damage.
NOTE: When placing the projector in the soft case, retract the tilt feet and...

3
POWER
BACK
INPUTIMAGE
ASPECT
INFO.
MENUNO SHOW
AUTO PC
4. Convenient Features
❶ Turning off the Image and Sound
Press  the  NO  SHOW  button  to  turn  off  the  image  and  sound  for  a 
short period of time. Press again to restore the image and sound.
POWER
BACK
INPUTIMAGE
ASPECT
INFO.
MENUNO SHOW
AUTO PC
❷ Freezing a Picture
Press  the  FREEZE  button  to  freeze  a  projected  moving  picture  such 
as DVD. Press again to resume motion.
❸ Enlarging and Moving a Picture
POWER...

35
. Convenient Features
❹ Using the Remote Mouse Receiver (LV-7365/LV-7265/LV-7260)
The remote mouse receiver enables you to operate your computer’s mouse functions from the remote control. It is 
a great convenience for clicking through your computer-generated presentations.
Connecting the remote mouse receiver to your computer
If you wish to use the remote mouse function, connect the mouse receiver and computer.
The mouse receiver can be connected directly to the computer’s USB port (type A)....

36
. Convenient Features
Operating your computer’s mouse from the remote control
You can operate your computer's mouse from the remote control.
PAGE ▲/▼ Button..................scrolls  the  viewing  area  of  the  window  or  to  move  to  the  previous  or  next  slide  in 
PowerPoint on your computer.
 / Mouse Buttons  ......moves the mouse cursor on your computer.
L-CLICK Button  ......................works as the mouse left button.
R-CLICK Button  .....................works as the mouse...

37
. Convenient Features
❺ Preventing the Unauthorized Use of the Projector
A  password  can  be  set  for  your  projector  to  avoid  operation  by  an  unauthorized  user  using  the  Menu.  When  a 
password  is  set,  turning  on  the  projector  will  display  the  password  input  screen.  Unless  the  correct  password  is 
entered, the projector cannot project an image.
To enable the Password function:
1.	 Press	the	MENU	button.
  t he menu will be displayed.
2.	 Use	the	SELECT	
	or...

38
  the [Confirm password] screen will be displayed.
NOTE: Do not forget your password. If you forget your password, contact your dealer.
7.	 Type	in	the	same	combination	of	SELECT	button	
  	and	press	the	OK	button.
  t he confirmation screen will be displayed.
8.	 Select	[Yes]	and	press	the	OK	button.
  t he Password function has been enabled.
To turn on the projector when Password is enabled:
1.	 Press	the	Main	Power	Switch	to	the	On	position	(I).	
2.	 Press	and	hold	the	POWER		button	for	about	1...

39
4.	 Use	the	SELECT		or		button	to	select	[Password]	and	press	the	OK	or	SELECT		button.
5.	 Use	the	SELECT	
	or		button	to	select	[off]	and	press	the	OK	button.
  t he password confirmation screen will be displayed.
6.	 Type	in	your	password	and	press	the	OK	button.
  When the correct password is entered, the Password function will be disabled.
NOTE: 
• If you forget your password, contact your dealer.
•  The [Password] setting cannot be cancelled by using the [Reset] of the menu.
. Convenient...

0
❶ Using the Menus
NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected.
1.	 Press	the	MENU	button	on	the	remote	control	or	projector	cabinet	to	display	the	Menu.
5. Using On-Screen Menu
POWER
BACK
INPUTIMAGE
ASPECT
INFO.
MENUNO SHOW
AUTO PC
2.	 Press	the	SELECT		or 	button	 on	the	 remote	 control	 or	the	 projector	 cabinet	to	highlight	 the	menu	
for	the	item	you	want	to	adjust	or	set.
POWER
BACK
INPUTIMAGE
ASPECT
INFO.
MENUNO SHOW
AUTO PC
3....


5. Using On-Screen Menu
POWER
BACK
INPUTIMAGE
ASPECT
INFO.
MENU
NO SHOW
AUTO PC
POWER
BACK
INPUTIMAGE
ASPECT
INFO.
MENUNO SHOW
AUTO PC
POWER
BACK
INPUTIMAGE
ASPECT
INFO.
MENUNO SHOW
AUTO PC
4.	 Use	the	SELECT		or		button	 on	the	 remote	 control	 or	the	
projector	cabinet	to	select	the	item	you	want	to	adjust	or	set.
5.	 Adjusting	the	level	of	a	selected	item	or	selecting	an	item.
	 For	Adjusting	items	(Slide	bar)
Slide bar  ...............Indicates settings or the direction of adjustment.
•...