Home > Canon > Printer > Canon printer PIXMA SELPHY ES40 User Manual

Canon printer PIXMA SELPHY ES40 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA SELPHY ES40 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    
    
    4
    Choose the size and placement of the image.
    Pressing the - button will make the image 
    larger. Pressing the 0 button will make it 
    smaller.
    Press the udl r buttons to move the image.
    Press the m(DISPLAY) button, or turn the w 
    wheel to rotate the image 90 degrees.
    Press the o button to accept the setting.
    
    
    
    
    5
    Print.
    Press the ., buttons to choose the number 
    of copies.
    Press the p button to start printing.
    
    
    With the exception of [Correct Red-Eye] (p. 34), [Image Optimize] (p. 34), [Adjust Image] (p. 34), and [My Colors] (p. 35), settings made in “Printing a Variety of Images” will not be applied.Changing the settings in [My Colors] (p. 35) will change the color settings on the image but will not affect the frame.Images with a resolution below 640 x 480 or a width-to-height ratio greater than 2:1 cannot be printed with frames.When a cartridge is replaced mid-way through printing, automatic adjustments (trimming frames, image placement, etc.) will be made depending on the paper size of the new cartridge. However, if settings incompatible with the new cartridge have been selected, the printer will restore the [Creative Print] screen.You can add frames to SELPHY using the supplied software (p. 56, pp. 62-64).
    
    
    
    
    
    C
    O
    P
    Y  
    						
    							
    
    
    You can decorate your images with up to 30 
    stamps. Choose from 10 different designs and 
    print (p. 81).
    When using the gold or silver cartridges, you 
    can decorate your images with up to 30 stamps. 
    Choose from 4 different gold or silver designs 
    (p. 81).
    When using a black and white cartridge, stamps 
    can not be printed.
    
    
    
    Printing with Clip Art
    1
    Display the clip art screen.
    Press the c button.
    Press the udl r buttons, or turn the w 
    wheel to choose a  (stamp), then press the 
    o button.
    
    
    2
    Choose an image.
    Press the l r buttons, or turn the w wheel to 
    choose an image, then press the o button.
    You can use the trimming function (p. 36) or 
    search images using the jump function (p. 27) 
    by pressing the m(EDIT) button and displaying 
    the edit menu.
    
    
    3
     
    Choose stamps.
    Press the udl r buttons, or turn the w 
    wheel to choose a stamp, then press the o 
    button.
    Only gold or silver printing compatible stamps 
    are displayed when using a gold or silver print 
    cartridge.
    
    
    C
    O
    P
    Y  
    						
    							
    
    
    4
    Choose where to place the stamps.
    Press the udl r buttons to move the stamp.
    Depending on the stamp, press the m(DISPLAY) 
    button, or turn the w wheel to rotate the stamp 
    90 degrees.
    Press the o button to place the stamp.
    
    
    
    5
    Choose whether or not to add another stamp.
    To add a stamp, press the l r buttons, or turn 
    the w wheel to choose [Yes], then press the 
    o button. Repeat Steps 3 to 5.
    To print without adding more stamps, press the 
    l r buttons or turn the w wheel to choose 
    [No] and press the o button. Then proceed to 
    Step 6.
    
    
    6
    Print.
    Press the ., buttons to choose the number of 
    copies to be printed.
    Press the p button to start printing.
    
    
    With the exception of [Correct Red-Eye] (p. 34), [Image Optimize] (p. 34), [Adjust Image] (p. 34), and [My Colors] (p. 35), settings made in “Printing a Variety of Images” will not be applied.Changing the settings in [My Colors] (p. 35) will change the color settings on the image but will not affect the stamps.Images with a pixel resolution below 640×480 or an aspect ratio greater than 2:1 cannot be printed with stamps.When a cartridge is replaced mid-way through printing, automatic adjustments (the printed area of the image, the placement of the stamps, etc.) will be made depending on the paper size of the new cartridge. However, if settings incompatible with the new cartridge have been selected, the printer will restore the [Creative Print] screen.In Step 4, pressing the b(BACK) button and then the o button will clear all clip art.You can add clip art to SELPHY using the supplied software (pp. 56, 62-64).
    
    
    
    
    
    C
    O
    P
    Y  
    						
    							
    
    
    You can turn your photo into a calendar (12 
    different designs, 10 designs when using a card 
    size cartridge).
    When a black and white, gold, or silver cartridge 
    is installed, calendars cannot be printed.
    
    
    Printing Calendars
    1
    Display the calendar screen.
    Press the c button.
    Press the udl r buttons, or turn the w 
    wheel to choose a  (calender), then press the 
    o button.
    
    
    2
    Choose a layout.
    Press the udl r buttons, or turn the w 
    wheel to choose a layout, then press the o 
    button.
    
    3
    Choose a background color.
    Press the  udl r buttons or turn the w 
    wheel to choose a color, then press the o 
    button.
    
    4
    Set the year, month, the starting day of 
    the week, and highlight holidays.
    Press the ud buttons to choose an item, then 
    press the l r buttons, or turn the w wheel to 
    change the settings.
    Press the o button.
    
    
    C
    O
    P
    Y  
    						
    							
    
    
    5
    Choose whether or not to add holidays.
    To add holidays, press the l r buttons, or turn 
    the w wheel to choose [Yes], and press the 
    o button.
    If you do not wish to add holidays, press the 
    l r buttons, or turn the w wheel to choose 
    [Next], and press the o button. Skip to Step 7.
    
    
    6
    Add holidays.
    Press the udl r buttons, or turn the w wheel 
    to choose a date, then press the o button.
    The selected date will turn red.
    Pressing the o button again will clear the 
    selection.
    When you are finished, press the b(BACK) button.
    The screen in Step 5 will be restored. Press the 
    l r buttons, or turn the w wheel to choose 
    [Next], and press the o button.
    
    
    
    
    
    7
    Choose an image.
    Press the l r buttons, or turn the w wheel to 
    choose an image, then press the o button.
    You can use the trimming function (p. 36) or 
    search images using the jump function (p. 27) by 
    pressing the m(EDIT) button and displaying the 
    edit menu.
    
    
    8
    Review image and print.
    Press the ., buttons to choose a number of 
    copies.
    Press the p button to start printing.
    
    
    With the exception of [Correct Red-Eye] (p. 34), [Image Optimize] (p. 34), [Adjust Image] (p. 34), and [My Colors] (p. 35), settings made in “Printing a Variety of Images” will not be applied.Changing the settings in [My Colors] (p. 35) will change the color settings on the image but will not affect the calender.Images with a resolution lower than 640 x 480 cannot be printed as calendars.When a cartridge is replaced mid-way through printing, automatic adjustments (trimming frames, image placement, etc.) will be made depending on the paper size of the new cartridge. However, if settings incompatible with the new cartridge have been selected, the printer will restore the [Creative Print] screen.
    
    
    
    C
    O
    P
    Y  
    						
    							
    
    
    Make your photos tell a story by turning them 
    into a photo diary (6 different layout designs).
    When a black and white, gold, or silver cartridge 
    is installed, multi layouts cannot be printed.
    As an example, this section will explain how to 
    print a layout with two images.
    
    
    
    Printing using Multi Layouts
    1
    Display the multi layout print screen.
    Press the c button.
    Press the udl r buttons, or turn the w 
    wheel to choose a  (Multi Layout), then press 
    the o button.
    
    
    2
    Choose a layout.
    Press the udl r buttons, or turn the w 
    wheel to choose a layout, then press the o 
    button.
    
    3
    Choose a background color.
    Press the udl r buttons or turn the w 
    wheel to choose a color, then press the o 
    button.
    
    C
    O
    P
    Y  
    						
    							
    
    
    4
    Choose an image.
    Press the l r buttons, or turn the w wheel 
    to choose the image to be printed in the area 
    marked [1] and press the o button.
    You can use the trimming function (p. 36) or 
    search images using the jump function (p. 27) by 
    pressing the m(EDIT) button and displaying the 
    edit menu.
    Use the same steps to choose an image to be 
    printed in the area marked [2] and press the o 
    button.
    
    
    
    5
    Confirm the images and print.
    Press the ., buttons to choose the number of 
    copies to be printed.
    Press the p button to start printing.
    
    
    With the exception of [Correct Red-Eye] (p. 34), [Image Optimize] (p. 34), [Adjust Image] (p. 34), and [My Colors] (p. 35), settings made in “Printing a Variety of Images” will not be applied.In layouts with more than 2 images, [Correct Red-Eye] (p. 34) settings made in “Printing a Variety of Images” will not be applied.Changing the settings in [My Colors] (p. 35) will change the color settings on the image but will not affect the background color.Images with a resolution lower than 640×480 cannot be printed in multi layout.When a cartridge is replaced mid-way through printing, automatic adjustments (trimming frames, image placement, etc.) will be made depending on the paper size of the new cartridge. However, if settings incompatible with the new cartridge have been selected, the printer will restore the [Creative Print] screen.
    
    
    
    
    C
    O
    P
    Y  
    						
    							
    
    
    You can make your images more fun by printing 
    with speech bubbles (6 different types).
    When a black and white, gold, or silver cartridge 
    is installed, speech bubbles cannot be printed.
    
    
    Printing with Speech Bubbles
    1
    Display the speech bubble screen.
    Press the c button.
    Press the udl r buttons, or turn the w 
    wheel to choose a  (Speech Bubble), then 
    press the o button.
    
    
    2
    Choose an image.
    Press the l r buttons, or turn the w wheel to 
    choose an image, then press the o button.
    You can use the trimming function (p. 36) or 
    search images using the jump function (p. 27) 
    by pressing the m(EDIT) button and displaying 
    the edit menu.
    
    
    3
    Choose a speech bubble.
    Press the udl r buttons, or turn the w 
    wheel to choose a Speech Bubble, then press 
    the o button.
    
    4
    Choose a color for the speech bubble.
    Press the udl r buttons or turn the w 
    wheel to choose a color, then press the o 
    button.
    
    C
    O
    P
    Y  
    						
    							
    
    
    5
    Choose where to place the speech 
    bubble.
    Press the udl r buttons to move the speech 
    bubble.
    Depending on the speech bubble, press the 
    m(DISPLAY) button or turn the w wheel to rotate 
    the speech bubble or move its position.
    Press the o button to place the speech 
    bubble.
    
    
    
    6
    Print.
    Press the ., buttons to choose the number of 
    copies to be printed.
    Press the p button to start printing.
    
    
    With the exception of [Borders] (p. 32), [Correct Red-Eye] (p. 34), [Image Optimize] (p. 34), [Adjust Image] (p. 34), and [My Colors] (p. 35), settings made in “Printing a Variety of Images” will not be applied.Changing the settings in [My Colors] (p. 35) will change the color settings on the image but will not affect the color of the speech bubbles.Images with a resolution lower than 640×480 cannot be printed with speech bubbles.When a cartridge is replaced mid-way through printing, automatic adjustments (the printed area of the image, the placement of the speech bubble, etc.) will be made depending on the paper size of the new cartridge. However, if settings incompatible with the new cartridge have been selected, the printer will restore the [Creative Print] screen.
    
    
    
    C
    O
    P
    Y  
    						
    							
    0
    
    You can add flair to your photos by printing with 
    image effects (8 different types).
    When a gold or silver cartridge is installed, 
    images cannot be printed with image effects.
    
    
    Printing with Image Effects
    1
    Display the image effects screen.
    Press the c button.
    Press the udl r buttons, or turn the w 
    wheel to choose a  (image effect), then press 
    the o button.
    
    
    2
    Choose an image effect.
    Press the l r buttons, or turn the w wheel 
    to choose an image effect, then press the o 
    button.
    
    Image EffectExplanation of Effect
    [Faded Edges]Keeps the center of the image clear while gently fading out 
    the edges.
    [Soft Edges]Keeps the center of the image in focus while gently blurring 
    the edges.
    [Soft Focus]Softens the focus of the entire image.
    [Star Lights]Turns the bright points of light in the image into stars for a 
    sparkling effect.
    [Modern Bright]Creates a soft white haze on the image.
    [Pinhole Camera]Creates a high contrast image with darkened edges such as 
    those taken with a pinhole camera.
    [Nostalgic]Creates the look of an old, color-faded photo.
    [Smooth Skin]Makes skin look smooth and beautiful.
    C
    O
    P
    Y  
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer PIXMA SELPHY ES40 User Manual