Canon printer PIXMA SELPHY ES1 User Manual

							11
Cover
Contents
Part Names
Print Settings
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Basic Operations
•	Do not use the printer near motors or other devices that generate 
strong magnetic fields, or in dusty environments. This may damage 
the printer or cause malfunction.
•	 Do not place the printer near televisions or radios. This may cause 
the printer to malfunction. 
COPY  
						

							12
Cover
Contents
Part Names
Print Settings
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Basic Operations
Display Language
Change the language of menus and messages.
1 Turn on SELPHY.
zzHold the  button until the screen at 
left is displayed.
zzTo turn off SELPHY, hold the  button 
again until the screen changes.
Approx. 45°
2 Raise the screen (LCD monitor).
zzNever force the screen up more than 45°, 
which may damage the printer or cause 
malfunction.
3 Access the setting screen.
zzPress the  button.
zzPress the  buttons to select 
[Change Settings], and then press the 
 button.
4 Access the language setting 
screen.
zzPress the  buttons to select  
[  Language], and then press the 
 button.
5 Choose a language.
zzPress the  buttons 
to select a language, and then press the 
 button.
zzTo return to the screen in step 2, press 
the  button twice. 
COPY  
						

							13
Cover
Contents
Part Names
Print Settings
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Basic Operations
Supported Cards/Images
Supported Memor y Cards
No Adapter RequiredAdapter Required (Sold Separately)
•
 SD Memory Card
• SDHC Memory Card
• SDXC Memory Card 
• miniSD Memory Card
• miniSDHC Memory Card • microSD Memory Card
• microSDHC Memory Card
• microSDXC Memory Card
•	 For memory cards that require an adapter, always insert the card 
into the adapter before inserting the adapter into the card slot.  
If you mistakenly insert the memory card into the card slot without 
an adapter, you may not be able to remove the card from the printer.
•	 Use a memory card formatted with the device you shot the photos 
with. Images on cards formatted with a computer may not be 
recognized.
•	 For instructions, refer to the memory card or adapter user manual.
USB Flash Drives
You can print images on USB flash drives (sold separately) by inserting the 
drive into the USB port on SELPHY (=  16).
Supported Images
JPEG images conforming to the Exif standard can be printed with SELPHY .
•	Images may not be displayed or printed correctly depending on their size\
 or if 
they have been edited on a computer. 
COPY  
						

							14
Cover
Contents
Part Names
Print Settings
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Basic Operations
Printing Images
Select images and specify the number of prints as follows. Here, printing 
from an SD memory card is described as an example, but you can print 
from other memory cards with the same steps.
1 Turn on SELPHY.
zzHold the  button until the screen at 
left is displayed.
zzTo turn off SELPHY, hold the  button 
again until the screen changes.
2 Raise the screen (LCD monitor).
zzNever force the screen up more than 45°, 
which may damage the printer or cause 
malfunction.
3 Insert the memory card into the 
slot.
zzInsert the memory card facing as shown 
until it clicks into place.
zzTo remove the card, push it in until it 
clicks, and then slowly release it.
zzThe image display screen used in the 
next step is displayed (=  6).
Approx. 45°
Label side
4 Choose an image.
zzPress the  buttons to select an 
image to print.
zzTo jump forward or back by five images, 
hold down the  buttons.
5 Specify the number of prints.
zzPress the  buttons to specify 
the number of prints.
zzTo increase or decrease the quantity 
by five prints, hold down the < u> 
buttons.
zzTo print other images at the same time, 
repeat steps 4 – 5.
Prints of current image
Total prints 
COPY  
						

							15
Cover
Contents
Part Names
Print Settings
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Basic Operations
6 Print.
zzPress the  button to start printing.
zzWhile printing, paper passes in and out 
of the back of SELPHY several times. 
Do not touch the paper until printing is 
finished and the print is ejected onto the 
paper cassette.
zzDo not allow 19 or more prints to 
collect in the ejection area on the paper 
cassette.
zzTo cancel printing in progress, always 
press the  button.
7 Add more paper as needed.
zzIf a message indicates that the paper 
has run out, remove the paper cassette 
without turning off the power.
zzAdd more paper to the cassette (=  9) 
and reinsert the cassette in SELPHY 
(=
  10).
8 Change the ink cassette as 
needed.
zzIf a message indicates that the ink 
has run out, open the ink cassette 
compartment cover without turning off the 
power.
zzTo remove the ink cassette, move the 
lock in the direction shown. Insert a new 
ink cassette (=
  8, 10).
•	 Never pull out the paper cassette, open the ink cassette 
compartment cover, or remove a memory card while printing or 
when you hear printer operation sounds immediately after it has 
been turned on. This may damage the printer.
•	 To cancel printing in progress, always press the < v> button. 
Printing cannot be canceled by pressing the < q> button, and 
unplugging the printer may damage it.
•	 Image display in step 4 may take some time when memory cards contain 
many images.
•	 If a message indicates that DPOF images remain, see “Printing Using C\
amera 
Settings (DPOF Print)” (=
  52).
•	 You can specify up to 99 images in step 4 and up to 99 prints per image in 
step 5. However, the total number of prints cannot exceed 999.
•	 Even if you press the  button to cancel printing, the printer will continue 
printing until the current sheet is finished. 
COPY  
						

							16
Cover
Contents
Part Names
Print Settings
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Basic Operations
Avoiding Left Over Paper
Note the following to prevent wasted paper, which occurs if ink is consumed 
faster than the paper.
•	Do not turn the sprocket too much when removing slack from the ink 
sheet (=
  8).
•	 To cancel printing in progress, always press the < v> button; after 
pressing the < v> button, never turn off the power before SELPHY is 
finished printing (step 6).
•	 If a message indicates that the paper has run out, add paper without 
turning off the printer or removing the ink cassette (step 7). Otherwise, 
press the  button to cancel printing (step 6).
Note that under some conditions, even if you follow these instructions, \
ink 
may be consumed faster than the paper, leaving you with excess paper.
Printing from USB Flash Drives
Images on USB flash drives (sold separately) can be printed the same way 
as images on memory cards.
Insert	a	USB	flash	drive.
zzRemove any inserted memory cards.
zzInsert a USB flash drive as shown.
zzAfter this, all steps are the same as for 
printing images from memory cards 
(=
  14 – 15).
•	 Some USB flash drives may be more difficult than others to insert and remove, 
and some may not work as expected.
•	 For instructions, refer to the flash drive user manual.
Making One Print from a Selected Image
For a convenient way to make a single print of a selected image, follow \
these steps.
Choose and print an image.
zzChoose an image as described in steps 
1 – 4 of “Printing Images” (=  14).
zzPress the  button for a single print 
of the selected image.
•	A single print is not produced this way if you follow steps 4 – 5 in 
“Printing Images” ( =  14) to choose images and the number 
of prints. To use this method for individual prints, make sure the 
number of prints is [0] in step 4 on =
  14 beforehand. 
COPY  
						

							17
Cover
Contents
Part Names
Print Settings
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Basic Operations
After Printing
 Turn off SELPHY (=  12) and remove any memory cards or USB 
flash drives.
 Lower the screen for storage.
 Unplug the power cord from the outlet and disconnect the adapter plug 
from SELPHY.
•	 If the compact power adapter is still warm, wait for it to cool down 
before putting it away.
 Remove the paper cassette and close the paper cassette compartment 
cover. Leave any remaining paper in the cassette, and store the 
cassette in a dark, cool, and dry place away from dust.
•	 Leave the ink cassette in SELPHY.
•	 Store SELPHY on a flat surface, away from sunlight and dust. 
Any 
dust that gets inside SELPHY may cause white banding on photos 
or damage the printer.
•	 Store any extra ink cassettes in the original package or a bag, away 
from sunlight and dust.
•	 Store any unused paper or ink cassettes in their unopened 
packages, away from sunlight.
Storing Prints
•	 To remove any extra paper from the 
edges of a print, fold the paper along the 
perforations and tear the edges off.
•	 When writing on prints, use an oil-based 
pen.
•	 To prevent discoloration, do not store 
prints where temperatures exceed 40 °C 
(104 °F), in humid or dusty places, or in 
direct sunlight.
•	 Also avoid the following actions, which may cause discoloration, fading,\
 
or bleeding: sticking tape on the printed surface, allowing the printed \
surface to contact vinyl or plastic, applying alcohol or volatile solven\
ts to 
the printed surface, or leaving the printed surface pressed firmly against 
other surfaces or objects over extended periods.
•	 When storing prints in an album, choose an album with photo covers 
made of nylon, polypropylene, or cellophane.
•	Color may change over time or depending on storage conditions. 
Canon cannot be held liable for discoloration. 
COPY  
						

							18
Cover
Contents
Part Names
Basic Operations
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Print Settings
Print Settings
Explore a variety of printing features in this chapter, such as cropping images, preparing ID 
photos, and enhancing images.
Printing All Images ..................................................................................19
Cropping Images
 ..................................................................................... 20
Printing ID Photos
 ................................................................................... 21Cropping Passport Images ...........................................................................\
...22Adjusting Settings .................................................................................. 23Configuring Settings ........................................................................\
................ 23
Choosing the Finish (Print Finish) ................................................................... 24
Printing with a Border around Images (Borders) ............................................. 24Choosing a Layout (Page Layout)
 ...................................................................
25
Optimal Prints with Auto Correction (Image Optimize) .................................... 26
Adjusting the Brightness ........................................................................\
......... 26
Making Skin Look Smooth (Smooth Skin) ....................................................... 27
Adjusting the Color Tone (My Colors) ............................................................. 27
Reducing the Appearance of Red-Eye (Correct Red-Eye).............................. 28
Printing with the Date (Date)
 ........................................................................\
... 28
Changing How the Date Is Displayed (Date Format) ...................................... 29
Saving Energy (Auto Power Down) ................................................................. 29 
COPY  
						

							19
Cover
Contents
Part Names
Basic Operations
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Print Settings
Printing All Images
Print all images on a memory card at once as follows.
1 Access the menu.
zzPress the  button.
2 Access the setting screen.
zzPress the  buttons to select 
[Print All Images], and then press the 
 button.
3 Choose the number of prints.
zzPress the  buttons to specify 
the number of prints.
4 Print.
zzPress the  button to start printing.
zzTo cancel printing, press the  button.
•	If the memory card contains more than 1,000 images, the 999 most recent \
images are printed, as determined by shooting date.
•	 You can specify up to 99 prints in step 3. However, the total number of prints 
cannot exceed 999.  
(For example, you can specify up to nine prints of each image if the ca\
rd 
contains 100 images.)
Prints per 
image
Number of sheets 
required
Number of 
images on card 
COPY  
						

							20
Cover
Contents
Part Names
Basic Operations
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Print Settings
Cropping Images
Print only selected areas of an image as follows.
1 Access the cropping screen.
zzChoose an image as described in step 4 
of “Printing Images” (=  14), press the 
EDIT button, and then press the  
button.
zzA crop frame is displayed, showing the 
image area that will be cropped.
2 Adjust the image area to crop.
zzTo switch the crop frame between portrait 
and landscape orientation, press the 
EDIT button.
zzTo move the crop frame, press the 
 buttons.
zzTo enlarge the crop frame, press the 
 button, and to reduce it, press the 
 button.
3	 Confirm	the	setting.
zzTo confirm the cropping area and return 
to the image display screen, press the 
 button. 
 is now shown in the 
lower left.
zzTo crop other images for printing with the 
first one, repeat steps 1 – 3.
4 Print.
zzPrint as described in step 6 of “Printing 
Images” (=  15).
zzAfter printing, crop settings are cleared.
•	 To adjust the cropping area once you have set it, press the EDIT button on the 
image display screen, press the < u> buttons to select [Adjust Cropping], 
and then press the  button. Repeat steps 2 – 3.
•	 To cancel cropping after you have set the cropping area, press the EDIT button 
on the image display screen, press the < u> buttons to select [Reset 
Cropping], press the < o> button to access the reset cropping screen, and 
then press the  button again.
•	 Cropping areas you have set are cleared if you turn off SELPHY or remove the 
memory card before printing.
•	 You can specify cropping for up to 99 images at once.
•	 Cropping is not available when printing with [Print All Images] or [DPOF Print] 
or when [Page Layout] ( =
  25) is set to [  Index] or [  Shuffle].
•	 The cropping aspect ratio indicated by the frame displayed on images can\
not 
be adjusted.
•	 To change the number of prints, press the < u> buttons on the image 
display screen in step 3. Note that specifying zero prints will not clea\
r cropping 
settings. 
COPY