Home > Canon > Printer > Canon printer PIXMA Pro9000 Mark II User Manual

Canon printer PIXMA Pro9000 Mark II User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA Pro9000 Mark II User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    61 2 345
    34Install the ink tank
    Insert the ink tank. Press the PUSH mark on the ink tank until it clicks into place.
    Make sure the Ink lamp lights red. 
    						
    							0
    61 2 345
    4
    DB
    C
    E
    5
    6
    Close the Top Cover (B).
    Wait for about 3 minutes until the  POWER lamp (green) (C) stops flashing and 
    stays lit then operating noise stops, and go to the next step. 
    Do not open the Top Cover while the lamp is flashing.
    •
    Make sure the Inner Cover (D) is closed.
    •
    Install all the other ink tanks in the same way.
    Install all the ink tanks.
    Make sure all the  Ink lamps light red.
    Match the labels when installing.
    •
    Once you have installed the ink tanks, do not remove them unnecessarily.
    •If an Alarm lamp (E) flashes orange, make sure that the Print Head and the ink tanks are 
    correctly installed.
    • 
    						
    							
    61 2 3 45
    5
    Install the Software
    Quit all running applications before installation.
    •
    To use the printer by connecting it to a computer, software including the 
    drivers needs to be copied (installed) to the computer's hard disk.
    The screens below are based on Windows Vista operating system 
    Ultimate Edition (hereafter referred to as "Windows Vista") and Mac OS X 
    v.10.5.x.
    You need to log on as the administrator (or a member of the Administrators group).
    •
    Do not switch users during the installation process.
    •
    It may be necessary to restart your computer during the installation pro\
    cess. Follow 
    the on-screen instructions and do not remove the  Setup CD-ROM during restarting. 
    The installation resumes from where it left off when your computer has been restarted.
    •
    Mac OS 9, Mac OS X Classic environments, or Mac OS X v.10.3.8 or earlier are not 
    supported.
    •
    Macintosh (P.21) Windows (P.12) 
    						
    							
    5
    2
    1
    A
    B
    Windows Macintosh
    If the Found New Hardware or Found New 
    Hardware Wizard dialog box appears:
    Remove the USB cable connected to 
    your computer. TURN OFF THE PRINTER (A).
    Turn on the computer, then insert the Setup CD-
    ROM into the CD-ROM drive.
    The setup program should start automatically.
    If the program does not start automatically, double-click 
    the CD-ROM icon on the computer. When the CD-ROM 
    contents appear, double-click MSETUP4.EXE.
    •
    Windows Vista
    Windows XP/2000 Go to Step .
    Go to Step 
    .
    The dialog box may close. In this case, proceed 
    from 
    .
    1
    Click  Cancel  to quit the dialog box.
    Proceed from 
    .
    2
    3
    Make sure that the POWER lamp (B) has stopped 
    flashing and is off.
    •
    It takes about 1 minute until the printer turns off.
    • 
    						
    							
    61 2 3 45
    34
    WindowsMacintosh
    AutoPlay screen appears, click  Run Msetup4.exe. User Account Control dialog box appears, click  Continue.
    If the same dialog box reappears in subsequent steps, click  Continue.
    Windows Vista Windows Vista 
    						
    							
    5
    65
    WindowsMacintosh
    Click Install.
    Move the cursor over items to display explanations.
    •
    Click Easy Install.
    Drivers, application software, and on-screen manuals are installed autom\
    atically.
    If you want to select particular items to install, click  Custom Install and follow the on-screen instructions to 
    proceed with the installation.
    •
    You can install the XPS Printer Driver from  Custom Install. (Windows Vista SP1 or later.)
    •
    When installing the XPS Printer Driver, select the IJ Printer Driver at the same time.
    • The XPS Printer Driver is a printer driver suitable for printing High Dy\
    namic Range images (full 16-bit 
    workflow) using Easy-PhotoPrint Pro.
    • 
    						
    							
    61 2 3 45
    78
    WindowsMacintosh
    Read the License Agreement screen carefully and click  Yes.
    During installation, follow any on-screen instructions to install the so\
    ftware.
    •
    When the Please Allow All Install Wizard Processes  screen appears, click 
    Next.
    Installation starts. 
    						
    							
    5
    910
    A
    WindowsMacintosh
    When the Printer Connection screen appears, connect the printer to the computer with a 
    USB cable.
    If installation does not continue after 10 minutes, click  Help on the screen in 
    step , then confirm the message.
    •
    When the printer is recognized by the computer, a message appears on 
    the screen.
    It takes about 30 seconds for the POWER lamp to light green.
    •
    Turn on the printer (A).
    The USB port is located on the right side of the printer.
    • 
    						
    							
    61 2 3 45
    1112
    C
    D
    WindowsMacintosh
    When the Print Head Alignment  screen appears, load two sheets of A4 or Letter-sized plain 
    paper in the Rear Tray (C) as shown. Align the Print Head
    For details, refer to "6 Loading Paper" on page 28.
    •
    Click Execute.
    Pinch and slide the Paper Guide (D) against the left edge of the paper\
    . 
    						
    							
    5
    14
    13
    F
    EG
    Windows
    Macintosh
    When the Start Print Head Alignment dialog box appears, click 
    Align Print Head .
    Click OK in the subsequent message.
    Printing of the pattern starts.
    If you align the Print Head automatically again, patterns different from those shown above may be 
    printed.
    •
    Make sure that the pattern shown is printed, then click 
    Next on the Print Head 
    Alignment screen.
    Some parts of patterns printed on the first page are faint.
    When Print Head Alignment cannot be executed properly, the Alarm lamp (G) will flash orange 11 
    times. In this case, refer to "When Printing Becomes Faint or Colors Are Incorrect" in the on-screen 
    manual: Basic Guide.
    •
    Pull out the Front Tray Extension (F) beforehand.
    •
    Wait until the pattern printing ends (about 5 minutes), and go to 
    the next step.
    •
    Do not open the Top Cover (E) while printing.
    • 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer PIXMA Pro9000 Mark II User Manual