Canon printer PIXMA MX492 User Manual

3.
With the clean cloth, wipe off any paper dust from the inside of the document feeder cover
(A).
4.
Wipe the glass of the ADF (B) and the inner side of the document feeder cover (white area)
(C) gently.
Make sure not to leave any residue, especially on the glass surface.
Important
•
If any foreign substances such as glue, ink or correction fluid are adhered to the glass of the ADF (B) as shown in the figure above, some black streaks will appear on the scanned image. In this
case, wipe the dirt off...

Cleaning the Paper Feed RollerIf the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly.
In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only
when necessary.
You need to prepare: a sheet of A4 or Letter-sized plain paper or cleaning sheet available on the
market1.
Make sure that the power is turned on.
2.
Remove any paper from the cassette, then push it back.
Note
•
If a message is displayed on the screen...

Cleaning the Inside of the Machine (Bottom Plate Cleaning)Remove stains from the inside of the machine. If the inside of the machine becomes dirty, printed paper mayget dirty, so we recommend performing cleaning regularly.
You need to prepare: a sheet of A4 or Letter-sized plain paper* * Be sure to use a new piece of paper.1.
Make sure that the power is turned on, then remove any paper from the cassette.
2.
Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, then unfold the
paper....

6.Press the Setup button, use the  or  button to select  Maintenance, then press the  OK
button.
LCD and Operation Panel
7.
Use the  or  button to select  Bottom cleaning , then press the OK button.
The paper cleans the inside of the machine as it feeds through the machine.
Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning
again.
Note
•
When performing Bottom Plate Cleaning again, be sure to use a new piece of paper.
If the problem is not resolved...

Changing the Machine Settings
Changing Machine Settings from Your Computer
Changing the Machine Settings on the LCD
195 

Changing Machine Settings from Your Computer
Changing the Print Options
Registering a Frequently Used Printing Profile
Setting the Ink Cartridge to be Used
Managing the Printer Power
Reducing the Printer Noise
Changing the Printer Operation Mode
196 

Changing the Print OptionsYou can change the detailed printer driver settings for print data that is sent from an application software.
Specify this option if you encounter print failures such as part of an image data being cut off.
The procedure for changing the print options is as follows:1.
Open the printer driver setup window
2.
Click  Print Options...  on the Page Setup  tab
The Print Options  dialog box opens.
Note
•
When you use the XPS printer driver, the functions available to you are...

Registering a Frequently Used Printing ProfileYou can register the frequently used printing profile to  Commonly Used Settings on the Quick Setup  tab.
Unnecessary printing profiles can be deleted at any time.
The procedure for registering a printing profile is as follows:
Registering a Printing Profile1.
Open the printer driver setup window
2.
Set the necessary items
From  Commonly Used Settings  on the Quick Setup  tab, select the printing profile to be used and if
necessary, change the settings after...

Important•
To save the page size, orientation, and number of copies that was set in each sheet, click Options...,
and check each item.
Note
•
When you re-install the printer driver or upgrade the printer driver version, the print settings that are already registered will be deleted from  Commonly Used Settings.
Registered print settings cannot be saved and preserved. If a profile is deleted, register the print settings again.
Deleting Unnecessary Printing Profile
1.
Select the printing profile to be...

Setting the Ink Cartridge to be UsedThis feature enables you to specify the most appropriate FINE cartridge among installed cartridges
according to an intended use.
When one of the FINE cartridges becomes empty and cannot be replaced immediately by a new one, you
can specify the other FINE cartridge that still has ink and continue printing.
The procedure for specifying the FINE cartridge is as follows:
 Ink Cartridge Settings
1.
Open the printer driver setup window
2.
Click  Ink Cartridge Settings  on...