Canon printer PIXMA MX492 User Manual

Notice for Unplugging the Power CordTo unplug the power cord, follow the procedure below.
Important
•
When you unplug the power cord, press the  ON button, then confirm that the  POWER lamp is off.
Unplugging the power cord while the  POWER lamp is lit or flashing may cause drying or clogging of the
print head and print quality may be reduced.
•
If the power cord is unplugged, the date/time settings will be reset and all documents stored in the machine's memory will be lost. Send or print a necessary...

LCD and Operation PanelThe mode button (A) on the operation panel allows you to switch between the copy mode, scan mode, fax
mode, and setup menu screen.
Pressing the  Menu button (B) in the respective modes shows the menu screen to select various functions or
settings.
Selecting a Menu or Setting Item
On the menu screen or settings screen, use the 
 or  button (C) to select an item or option, then press
the  OK button (D) to proceed with the procedure.
To return to the previous screen, press the  Back...

Select Scan contrast , press the OK button (D).
Use the  or  button (C) to change the contrast, then press the  OK button (D).
123 

Entering Numbers, Letters, and SymbolsUse the Numeric buttons to enter or edit such information as unit name, a recipient's name for the directory,
etc.
Switching the Input Mode
Each time the  Tone button is pressed, the input mode is switched in the following order: lowercase mode
(:a), uppercase mode (:A), then numeric mode (:1).
The current input mode appears at the upper right corner of the LCD.
Entering Numbers, Letters, and Symbols
Press the  Tone button to switch the input mode.
Use the...

defëéèêDEFËÉÈÊ33gh i ï í ì îGH I Ï Í Ì Î44jklJKL55mnoñøöóòõôMNOÑØÖÓÒÕÔ66pqrsþPQRSÞ77tuvüúùûTUVÜÚÙÛ88wxyzýWXYZÝ99  00. @ - _ SP*1
 # ! " , ; : ^ ` = / | ' ? $ % & + ( ) [ ] { } < > \ *2
 ~*2#Switch the input mode.
*1 "SP" indicates a space.
*2 Displayed only when entering characters in the LAN settings.
125 

Loading Paper / Originals
Loading Paper
Loading Originals
126 

Loading Paper
Loading Plain Paper / Photo Paper
Loading Envelopes
Media Types You Can Use
Media Types You Cannot Use
Printing Area
127 

Loading Plain Paper / Photo PaperYou can load plain paper or photo paper.
Important
•
If you cut plain paper into small size such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) to perform trial
print, it can cause paper jams.
Note
•
We recommend Canon genuine photo paper for printing photos.
For details on the Canon genuine paper, see 
Media Types You Can Use .
•
You can use general copy paper.
For the page size and paper weight you can use for this machine, see 
Media Types You Can Use...

3.
Grab the right and left sides of the front cover and pull out the cassette until it stops.
4.
Use the right paper guide (C) to slide both paper guides all the way out.
5.
Load the paper in the center of the cassette WITH THE PRINT SIDE FACING DOWN.
Push the paper stack all the way to the back of the cassette.
* The above figure shows the machine with the paper output tray raised.
Important
•
Always load paper in the portrait orientation (D). Loading paper in the landscape orientation (E) can cause...

6.
Slide the right paper guide (C) to align the paper guides with both sides of the paper stack.
Do not slide the paper guides too hard against the paper. The paper may not be fed properly.
* The above figure shows the machine with the paper output tray raised.
Note
•
Do not load sheets of paper higher than the load limit mark (F).
•
Keep the paper stack height below the tabs (G) of the paper guides.
* The above figure shows the machine with the paper output tray raised.
•
Load small size paper, such as...