Canon printer PIXMA MG8120 User Manual

							
7

Do not connect the USB cable yet.
Install the Software (USB Connection)
Quit all running applications before installation.
Log on as the administrator (or a member of the 
Administrators group).
Do not switch users during the installation process.
Internet connection may be required during the 
installation. Connection fees may apply. Consult the 
internet service provider.
It may be necessary to restart your computer during 
the installation process. Follow the on-screen 
instructions and do not remove the Setup CD-ROM 
during restarting.  
The installation resumes once your computer has 
restarted.
For the system requirements, refer to “13 
Specifications”.
•
•
•
•
•
•
If you connect the machine via USB cable before installing the 
software:
□
If the dialog box closes, proceed to 
 on page 20.
2. Click Cancel.
3.  Proceed to
  on page 20.
1.
 Remove the USB cable 
connected to your computer.
For Windows 7
1.  Remove the USB cable connected to your computer.
2.  Proceed to
  on page 20.
For Windows Vista/Windows XP
This dialog box may appear.
To use the machine by connecting it to a computer, 
software including the drivers needs to be copied 
(installed) to the computer’s hard disk. The installation 
process takes about 20 minutes. (The installation time 
varies depending on the computer environment or the 
number of application software to be installed.)
•
Easy-WebPrint EX□
Easy-WebPrint EX is Web print software that is installed on the computer 
when installing the supplied software. Internet Explorer 7 or later is 
required to use this software. An Internet connection is required for 
installation. 
						

							
3
3
A
21
07  Install the Software (USB Connection)
Click Run Msetup4.exe on the AutoPlay screen, then click 
Yes or Continue on the User Account Control dialog box.
If the User Account Control dialog box reappears in following 
steps, click Yes or Continue.
Double-click the Setup icon of the CD-ROM folder 
to proceed to the following screen. Enter your 
administrator name and password, then click OK.
If the CD-ROM folder does not open automatically, double-
click the CD-ROM icon on the desktop.
If you do not know your administrator name or password, 
click the help button, then follow the on-screen instructions.
Windows 7/Windows Vista
Windows XP
Turn on the computer, then insert 
the Setup CD-ROM into the CD-
ROM drive.
If you are using Windows, the setup 
program starts automatically.
Press the ON button (A) to TURN 
OFF THE MACHINE.
Operating noise may continue for up to 
40 seconds until the machine turns off.
Do NOT connect the USB 
cable to the computer and 
the machine yet. If you have 
already connected the cable, 
disconnect it now.
•
For Windows
If the program does not start 
automatically, double-click the 
CD-ROM icon in Computer or 
My Computer. When the CD-
ROM contents appear, double-
click MSETUP4.EXE.
• 
						

							
654
7  Install the Software (USB Connection)
Click Install.Click Easy Install.
The drivers, application software, and on-screen 
manuals are installed.Follow any on-screen instructions to 
proceed with the software installation.
Select Use the printer via USB, 
then click Next.
If you want to select particular items to 
install, click Custom Install.
• 
						

							
B
7  Install the Software (USB Connection)
Necessary Information for the User 
Registration
□If the Extended Survey 
Program screen appears
□
If you can agree to Extended 
Survey Program, click Agree. 
If you click Do not agree, the 
Extended Survey Program will not 
be installed. (This has no effect on 
the machine’s functionality.)
Important Information for the Installation
If the power is on, the Print Head Holder 
will move when the Scanning Unit 
(Cover) (B) is opened.
•
When the serial number is not displayed on the 
registration screen automatically, input the serial 
number located inside the machine (as shown in 
the illustration). 
USB Port□
When the Printer Connection screen appears, 
connect the machine to the computer with a USB 
cable. 
After connecting the cable, TURN ON THE 
MACHINE.
The USB Port is located on the right side at the 
back of the machine. The lower port is for USB. 
						

							
87
7  Install the Software (USB Connection)
Click Exit to complete the installation.
Congratulations! Setup is complete. 
Proceed to page 45 for information 
regarding the Solution Menu EX and 
the on-screen manual or page 46 to 
start using the machine.
For Macintosh
It is necessary to restart the computer before 
scanning using the Operation Panel on the machine 
for	the	first	time.
For Windows
Solution Menu EX starts.
For Macintosh
Solution Menu EX starts when clicking OK in the 
Canon Solution Menu EX dialog.
Installing the XPS Printer Driver
In Windows 7 and Windows Vista SP1 or 
later, the XPS Printer Driver can be installed 
additionally. To install, perform from  in “7 
Install the Software (USB Connection)” on page 
20. Click Custom Install in , then select XPS 
Printer Driver in the Custom Install screen.
For details on useful functions of the XPS Printer 
Driver, refer to the on-screen manual: Advanced 
Guide.
Remove the Setup CD-ROM and keep it in a safe 
place.
The buttons displayed on Solution Menu EX 
may vary depending on the country or region 
of purchase.
• 
						

							
8

An “Ad-hoc connection,” which establishes a direct connection to t\
he 
computer over a wireless connection without using an access point, is no\
t 
supported. Be sure to prepare an access point.
N o t e s   o n   W i r e l e s s   C o n n e c t i o n■
The	configuration,	router	functions,	setup	procedures	and	security	
settings of the network device vary depending on your system 
environment. For details, refer to your device’s instruction manual or 
contact its manufacturer.
In	an	office	setup,	consult	your	network	administrator.
If you connect to a network that is not protected with security measures\
, 
there is a risk of disclosing data such as your personal information to \
a 
third party.
The machine cannot be used over a wireless and wired connection at 
the same time.
If an error message appears or if you have trouble with the 
network connection, refer to the printed manual: Network Setup 
Troubleshooting.
Place the machine and computer on the same network segment.
•
•
•
•
•
•
Before connecting the machine to the 
network, make sure that the computer and 
access point or router is connected.
Add (connect) the machine to the network.
InternetAccess point or 
wireless router, etc.
Wireless Setup 
						

							
8  Wireless Setup
W i r e l e s s   S e t u p   U s i n g   E a s y   S e t u p
For details on how to check the following information, refer to the manu\
al of your access point or router, or contact its manufacturer.
C h e c k   t h e   I n f o r m a t i o n   f o r   W i r e l e s s   C o n n e c t i o n■
In most cases, “Easy Setup” will be used to connect the machine to\
 your access point or router. Before you continue, you must 
gather the information below which will be required during the installation. For your convenience, you may record the information 
in the provided spaces and then proceed to page 26.
Access Point Name/Network Name:Network Key:
* Also referred to as SSID. 
		 An	identifier	to	identify	the	specific	access	point.* Also referred to as encryption key, WEP key or WPA/WPA2 
passphrase, Pre-Shared key. 
  A password required to set to prevent unauthorized access to 
communication.
 You can retrieve your network key by using the Canon PIXMA Wireless Setup Assistant or the instructions which can be downloaded 
from the Canon support webpage (www.usa.canon.com/downloadlibrary). 
If you are unable to retrieve the network key or other settings, refer t\
o the manual of your access point or router, or contact its 
manufacturer.
For other connection methods, please refer to the information located at\
 the bottom of this page.•
If your access point or router supports WPS□
The wireless connection can be setup without gathering the 
information on the above. Please refer to your access point or 
router	manual	to	confirm	if	WPS	is	supported.	If	so,	Go	to	“Wireless	
Setup Using WPS (Wi-Fi Protected Setup)” on page 28.
For details on WPS, refer to the manual of your access point.•
If you choose one of these connection methods, skip the “Easy Setup”\
 section and proceed the desired section (WPS (Wi-Fi 
Protected Setup) or WCN (Windows Connect Now)).
If you are using Windows 7/Windows Vista and have a 
USB flash drive
□
You	can	configure	wireless	connection	settings	by	
using the WCN function as well. For details, refer 
to “Wireless Setup Using WCN (Windows Connect 
Now)” on page 31. 
						

							
321
D
C
A
B
45
8  Wireless Setup
Use the { or } button (A) to 
display Setup, then touch the right 
FUNCTION button (B). 
Use the [ or ] button 
(C) to select Wireless 
LAN setup, then touch 
the OK button.
Select Yes, then touch the OK 
button.
When wireless connection is enabled, 
the Wi-Fi lamp (D) lights blue.
Select Easy setup, 
then touch the OK 
button.
Select the access 
point name you wrote 
down on page 25, then 
touch the OK button.
If you are living in an apartment, nearby 
access points in use may be detected.
The access point names with 2-byte 
characters are not displayed properly, 
however, can be selected.
•
• 
						

							
6789
EF
8  Wireless Setup
Make sure that one of the above screens is 
displayed, then touch the right FUNCTION 
button.
If the above screen is not displayed, go to .
Next, read “10 Install 
the Software (Network 
Connection)” on page 35!
Enter the network key you wrote 
down on page 25, then touch the 
left FUNCTION button (E).
Enter upper and lower 
case letters of the alphabet 
correctly.
•
For details on character 
entry, refer to the printed 
manual: Network Setup 
Troubleshooting.
•
Touch the center FUNCTION button (F) 
to switch character entry modes.
Make sure that the 
network key is correct, 
then touch the OK 
button.
If Failed to connect to the access point. appears, 
touch the OK button, make sure that the network key is 
correct, then enter it again. If a connection still cannot be 
established, refer to the printed manual: Network Setup 
Troubleshooting.
•
When the above screen appears, 
touch the OK button. 
						

							
21
A
B
C
3
D
8  Wireless Setup
W i r e l e s s   S e t u p   U s i n g   W P S   ( W i - F i   P r o t e c t e d   S e t u p )
Use the { or } button (A) to 
display Setup, then touch the right 
FUNCTION button (B).
Use the [ or ] button 
(C) to select Wireless 
LAN setup, then touch 
the OK button.
Read this 
section only 
when setting 
up a wireless 
connection by 
using the WPS 
(Wi-Fi Protected 
Setup).
Select Yes, then touch the OK button.
When wireless connection is enabled, the Wi-Fi lamp 
(D) lights blue.