Canon printer PIXMA MG7720 User Manual

171 

Loading Small Size Paper Such as 4" x 6" (10 x 15 cm)You can load 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) size photo paper in the cassette 1.Load large size paper, such as A4 or Letter, in the cassette 2.
Loading Large Size Paper Such as A4 or Letter
Important

3.
Slide the paper guide (A) in front and (B) on the right to open the guides.
4.
Load the paper stack WITH THE PRINT SIDE FACING DOWN, and place it in the center of
the cassette 1.
Important

5.
Align the paper guide (A) in front with the paper stack.
For standard sizes, align the paper guide (A) with where it clicks into place.
6.
Slide the paper guide (B) on the right to align the right and left guides with both sides of the
paper stack.
Do not slide the paper guides too hard against the paper. The paper may not be fed properly.
Note

8.
Select the size and type of the loaded paper in the cassette 1 at Page size and Type , then
tap  Register .
If a message is displayed on the screen, follow the directions in the message to complete registration.
Paper Settings
9.
Holding both sides of the paper output tray, gently open it.
The output tray extension opens automatically when the paper output tray is opened.
Note

Loading Large Size Paper Such as A4 or LetterYou can load A4, B5, A5, 8" x 10" (20 x 25 cm), Letter, or Legal-sized photo paper or plain paper in the
cassette 2.
You can also load envelopes in the cassette 2.
Loading Envelopes
Load small sizes of paper in the cassette 1.
Loading Small Size Paper Such as 4" x 6" (10 x 15 cm)
Note

3.
Slide the paper guide (A) in front and (B) on the right to open the guides.
4.
Load the paper stack WITH THE PRINT SIDE FACING DOWN, and place it in the center of
the cassette 2.
Important

Note

Note

8.
Select the size and type of the loaded paper in the cassette 2 at Page size and Type , then
tap  Register .
If a message is displayed on the screen, follow the directions in the message to complete registration.
Paper Settings
9.
Holding both sides of the paper output tray (I), gently open it.
The output tray extension opens automatically when the paper output tray is opened.
10.
Extend the paper output support (J).
Note