Canon printer PIXMA MG7520 User Manual

Making CopiesThis section describes the procedure to copy with  Copy.1.
Make sure that the machine is turned on.
2.
Load paper.
3.
Flick the HOME screen, then tap  Copy .
Using the Operation Panel
The Copy standby screen is displayed.
4.
Load the original on the platen glass.
5.
Specify the settings as necessary.
A.
The copy layout is displayed.
Switch the layout (single-sided/2-on-1/two-sided).
B.
Tap to specify the number of copies.
1.
Flick to specify the number of copies.
2.
Tap to specify the number...

For details on the setting items:
Setting Items for Copying
D.
Tap to preview an image of the printout on the preview screen.
For details:
Displaying the Preview Screen
E.
Tap to specify the page size.
6.
Touch the Color button for color copying, or the  Black button for black & white copying.
The machine starts copying.
Remove the original on the platen glass after copying is complete.
Important
•
Do not open the document cover or remove the original from the platen glass until scanning is
completed....

Adding the Copying Job (Reserve copy)
You can add the copying job while printing (Reserve copy). The screen below is displayed when you can add the copying job.
Load the original on the platen glass and touch the same button (the  Color button or the  Black button) as
the one which you previously touched.
Important
•
When you load the original on the platen glass, move the document cover gently.
Note
•
When  Print qlty  (print quality) is set  High, you cannot add the copying job.
•
When you add the...

Displaying the Preview ScreenWhen 
 is displayed on the Copy standby screen, tapping  allows you to preview an image of the
printout on the preview screen.
Important
•
In the following conditions,  is not displayed when the Copy standby screen is displayed.
•
2-sided  is selected for  2-sidedPrintSetting .
•
2-on-1 copy or 4-on-1 copy  is selected for  Layout.
When either of the conditions above is selected, you can set to display the preview screen after
scanning the original is finished.
Two-Sided...

Setting Items for CopyingYou can change the copy settings such as magnification and intensity.
Print Settings Screen
Note
•
For details on the print setting screen or the setting item for  Photo copy, see Copying Photos .
How to display the print setting screen varies with the copy menu.
•
In  Copy :
The following screen is displayed by tapping  Settings on the Copy standby screen.
•
In Borderless copy  or Frame erase copy :
The following screen is displayed before copying.
Setting Items
You can specify...

Note•
Depending on the copy menu, some setting items cannot be selected. This section describes the
setting items in  Copy.
The setting item which cannot be selected is displayed grayed out.
For details on the setting items for  Photo copy, see 
Copying Photos .
•
Some settings cannot be specified in combination with the setting of other setting item or the copy
menu. If the setting which cannot be specified in combination is selected, 
 and  Error details  are
displayed on the touch screen. In this...

Adjust print quality according to the original.
Important
•
If you use Draft with  Type set to  Plain paper  and the quality is not as good as expected, select
Standard  or High  for Print qlty  and try copying again.
•
Select High for Print qlty  to copy in grayscale. Grayscale renders tones in a range of grays
instead of black or white.
6.
Layout
Select the layout.
Copying Two Pages to Fit onto a Single Page
Copying Four Pages to Fit onto a Single Page
7.
2-sidedPrintSetting
Select whether to perform...

Reducing or Enlarging a CopyYou can specify the magnification optionally or select the preset-ratio copying or fit-to-page copying.
The screen below is displayed when you tap  Settings in the Copy standby screen and tap  Magnif. to select
the reduction/enlargement method.A.
Tap to display the screen below.
1.
Flick to specify the magnification.
2.
Tap to specify the magnification.
If you keep touching, the magnification is changed by 10 %.
B.
Flick to specify the magnification.
C.
Tap to confirm the...

•Preset ratio
You can select one of the preset ratios to reduce or enlarge copies.
Select the appropriate ratio for size of original and page size.
The setting in  Magnif.: 70% A4->A5 /86% A4->B5 /94% A4->LTR /115% B5->A4 /141% A5->A4 /156%
5x7->LTR /183% 4x6->LTR
Note
•
Some of the preset ratios are not available depending on the country or region of purchase.
•
Ratio specified copy
You can specify the copy ratio as a percentage to reduce or enlarge copies.
Note
•
400% MAX  (maximum copy ratio) and  25%...

Two-Sided CopyingWhen you select  2-sided for 2-sidedPrintSetting  in Copy , you can copy two original pages onto the both
sides of a single sheet of paper.
Select  2-sided , then tap  OK.
If you tap  Advanced  with 2-sided  selected, you can specify the orientation and the stapling side of the
original.
•
When you select  Orientation: Portrait  and Output: Long side bind :
•
When you select Orientation: Portrait  and Output: Short side bind :
•
When you select Orientation: Landscape  and Output: Long...