Canon printer PIXMA MG7520 User Manual

Energy Star®
The Energy Star ®
 programme is a voluntary scheme to promote the development and purchase of
energy efficient models, which help to minimise environmental impact.
Products which meet the stringent requirements of the Energy Star ®
 programme for both environmental
benefits and the amount of energy consumption will carry the Energy Star ®
 logo accordingly.
Paper types
This product can be used to print on both recycled and virgin paper (certified to an environmental stewardship scheme),...

Main Components and Basic Operations
Main Components
About the Power Supply of the Machine
Using the Operation Panel
132 

Main Components
Front View
Rear View
Inside View
Operation Panel
133 

Front View
(1) operation panelUse to change the settings of the machine or to operate it. Also, lift and open it to replace an ink tank, to
check the ink lamp, or to remove jammed paper inside the machine.
Operation Panel
(2) document cover Open to load an original on the platen glass.
(3) paper output tray Opens automatically when printing or copying starts and printed paper is ejected. Also, you need to
open it to insert a memory card.
(4) disc tray guide Open by pulling it out to attach the disc tray....

(7) cassette 1Load 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) size photo paper into the cassette, and insert it into themachine. Two or more papers of the same size and media type can be loaded at the same time, which
are fed automatically one sheet at a time.
Loading Small Size Paper
The disc tray can be stored in the back of the cassette 1.
How to Detach / Attach the Disc Tray
(8) cassette 2 Load A4, B5, A5, or Letter-sized plain paper or photo paper and envelopes into the cassette,...

Rear View
(1) rear coverDetach to remove jammed paper.
(2) power cord connector Plug in the supplied power cord.
(3) USB port Plug in the USB cable to connect the machine with a computer.
(4) wired LAN connector Plug in the LAN cable to connect the machine to a LAN.
Important
•
Do not touch the metal casing.
•
Do not plug in or unplug the USB cable or LAN cable while the machine is printing or scanning originalswith the computer.
136 

Inside View
(1) card slotInsert a memory card.
Before Inserting the Memory Card
(2) Access lamp Lights or flashes to indicate the memory card status.
Inserting the Memory Card
(3) ink lamps Lights or flashes to indicate the ink tank status.
Checking the Ink Status with the Ink Lamps
(4) print head holder The print head is pre-installed.
Note
•
For details on replacing an ink tank, see Replacing an Ink Tank .
137 

Operation Panel* All buttons and lamps on the operation panel are shown lit in the figure below for explanatory purposes.
Only available buttons will be lit.
(1) ON button Turns the power on or off. Before turning on the power, make sure that the document cover is closed.
Turning the Machine On and Off
(2) POWER lamp Lights after flashing when the power is turned on.
(3) HOME button Used to display the HOME screen.
Using the Operation Panel
(4) touch screen Displays messages, menu items, and the...

Lights:Wireless LAN connection is enabled.
Flashes: Printing or scanning over wireless LAN. Also flashes while configuring the wireless LANconnection.
Note
•
When buttons on the operation panel are touched, the machine generates keypad or alarm sounds as
necessary. The sound volume can be adjusted in  Sound control of Device user settings .
Device user settings
139 

About the Power Supply of the Machine
Confirming that the Power Is On
Turning the Machine On and Off
Notice for the Power Plug/Power Cord
Notice for Unplugging the Power Cord
140