Canon printer PIXMA MG6822 User Manual

For B (lines are missing or horizontal white streaks are present) in the pattern C or pattern D, orin both patterns:
The cleaning is required. Tap  Also B, then tap  Yes on the cleaning confirmation screen.
The machine starts cleaning the print head.
Cleaning the Print Head
Note

Cleaning the Print HeadClean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle checkpattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head
consumes ink, so clean the print head only when necessary.
You need to prepare: a sheet of A4 or Letter-sized plain paper1.
Make sure that the power is turned on.
2.
Load a sheet of A4 or Letter-sized plain paper in the cassette. After pushing the cassette back, the paper...

7.Tap Yes.
The machine starts cleaning the print head.
Do not perform any other operations until the machine completes the cleaning of the print head. This
takes about 1 minute.
The pattern print confirmation screen will appear.8.
Tap  Yes.
The nozzle check pattern will be printed.
9.
Examine the nozzle check pattern .
Note

Cleaning the Print Head DeeplyIf print quality does not improve by the standard cleaning of the print head, clean the print head deeply.
Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean the print head deeply only when necessary.
You need to prepare: a sheet of A4 or Letter-sized plain paper1.
Make sure that the power is turned on.
2.
Load a sheet of A4 or Letter-sized plain paper in the cassette. After pushing the cassette back, the paper information...

7.Tap Yes.
The machine starts cleaning the print head deeply.
Do not perform any other operations until the machine completes the deep cleaning of the print head.
This takes about 1 to 2 minutes.
The pattern print confirmation screen will appear.8.
Tap  Yes.
The nozzle check pattern will be printed.
9.
When the completion message appears, tap  OK.
10.
Examine the nozzle check pattern .
If a particular color is not printed properly, 
replace the ink tank  of that color.
If the problem is not resolved,...

Aligning the Print HeadIf printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head
position.
Note

The confirmation screen will appear.
7.
Confirm the message, then tap Yes.
The print head alignment sheet will be printed.
Important

10.
Close the document cover gently, then tap OK.
The machine starts scanning the print head alignment sheet, and the print head position will be adjusted automatically.
Important

Performing Maintenance Functions from Your Computer
(Windows)
Cleaning the Print Heads
Aligning the Print Head
Aligning the Print Head Position
Printing a Nozzle Check Pattern
209 

Cleaning the Print HeadsThe print head cleaning function allows you to clear up clogged print head nozzle. Perform print head
cleaning if printing is faint or a specific color fails to print, even though there is enough ink.
The procedure for cleaning the print head is as follows:
 Cleaning
1.
Open the printer driver setup window
2.
Click  Cleaning  on the Maintenance  tab
When the  Print Head Cleaning  dialog box opens, select the ink group for which cleaning is to be
performed.
Click  Initial Check...