Canon printer PIXMA MG6820 User Manual

Page Layout PrintingThe page layout printing function allows you to print more than one page image on a single sheet of paper.
The procedure for performing page layout printing is as follows:
1.
Open the printer driver setup window
2.
Set page layout printing
Select  Page Layout  from the Page Layout  list on the Page Setup  tab.
The current settings are displayed in the settings preview on the left side of the printer driver.
3.
Select the print paper size
Select the size of the paper loaded in the...

PagesTo change the number of pages to be printed on a single sheet of paper, select the number of
pages from the list.
Page Order To change the page arrangement order, select a placement method from the list.
Page Border To print a page border around each document page, check this check box.
5.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute print, the specified number of pages will be arranged on each sheet of paper in the specified order.
412 

Tiling/Poster PrintingThe tiling/poster printing function allows you to enlarge image data, divide it into several pages, and print
these pages on separate sheets of paper. You can also paste the pages together to create a large print like
a poster.
The procedure for performing tiling/poster printing is as follows:
Setting Tiling/Poster Printing
1.
Open the printer driver setup window
2.
Set tiling/poster printing
Select  Tiling/Poster  from the Page Layout  list on the Page Setup  tab.
The current...

If necessary, click Specify..., specify the following settings in the  Tiling/Poster Printing dialog box,
and then click  OK.
Image Divisions
Select the number of divisions (vertical x horizontal).As the number of divisions increases, the number of sheets used for printing increases. If you are
pasting pages together to create a poster, increasing the number of divisions allows you to create
a larger poster.
Print "Cut/Paste" in margins To leave out words "Cut" and "Paste",...

Note

Booklet PrintingThe booklet printing function allows you to print data for a booklet. Data is printed on both sides of the
paper. This type of printing ensures that pages can be collated properly, in page number order, when the
printed sheets are folded and stapled at the center.
The procedure for performing booklet printing is as follows:
1.
Open the printer driver setup window
2.
Set booklet printing
Select  Booklet  from the  Page Layout  list on the Page Setup  tab.
The current settings are displayed...

Margin for staplingSelect which side should the stapling margin be on when the booklet is completed.
Insert blank page To leave one side of a sheet blank, check the check box, and select the page to be left blank.
Margin Enter the margin width. The specified width from the center of the sheet becomes the margin width
for one page.
Page Border To print a page border around each document page, check the check box.
5.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute print, the document...

Duplex Printing
The procedure for printing data on both sides of a sheet of paper is as follows:
You can also set duplex printing in  Additional Features on the Quick Setup  tab.
Performing Automatic Duplex Printing You can perform the duplex printing without having to turn over the paper.
1.
Open the printer driver setup window
2.
Set automatic duplex printing
Check the  Duplex Printing  check box on the  Page Setup tab and confirm that  Automatic is checked.
3.
Select the layout
Select  Normal-size ,...

Use normal-size printingPrint without reducing the page.
Use reduced printing Reduce the page slightly during printing.
5.
Specify the side to be stapled
The best  Stapling Side  is selected automatically from the  Orientation and Page Layout  settings. To
change the setting, select another stapling side from the list.
6.
Set the margin width
If necessary, click  Specify Margin... and set the margin width, and then click  OK.
7.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute...

3.
Select the layoutSelect  Normal-size , Fit-to-Page , Scaled , or Page Layout  from the Page Layout  list.
4.
Specify the side to be stapled
The best  Stapling Side  is selected automatically from the  Orientation and Page Layout  settings. To
change the setting, select another stapling side from the list.
5.
Set the margin width
If necessary, click  Specify Margin... and set the margin width, and then click  OK.
6.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute print, the...