Canon printer PIXMA MG6820 User Manual

Setting Up Card Slot as Memory Card Drive of ComputerThe card slot of the machine can also be used as the memory card drive of the computer.
Important

Important

Network Connection
Network Connection Tips
283 

Network Connection Tips
Default Network Settings
Cannot Proceed beyond Printer Connection Screen/Connect Cable Screen
Another Printer Found with Same Name
Connecting to Another Computer via LAN/Changing from USB to LAN
Connection
Printing Network Settings
284 

Default Network SettingsLAN Connection DefaultsItemDefaultChange LANDisable LANSSIDBJNPSETUPCommunication modeInfrastructureWireless LAN securityDisableIP address  (IPv4 )Auto setupIP address  (IPv6 )Auto setupSet printer name *XXXXXXXXXXXXEnable/disable IPv6EnableEnable/disable WSDEnableTimeout setting1 minuteEnable/disable BonjourEnableService nameCanon MG6800 seriesLPR protocol settingEnablePictBridge communicationEnable
("XX" represents alphanumeric characters.)
* Default value depends on...

Another Printer Found with Same NameWhen the printer is found during setup, other printers with the same name may appear on the resultsscreen.
Select a printer with checking the printer settings against those on detection result screen.

Connecting to Another Computer via LAN/Changing from USB toLAN Connection
For Windows:
For Mac OS:
For Windows:To add a computer to connect to the machine on a LAN or to change from USB to LAN connection,
perform setup using the Setup CD-ROM or follow the instructions on the Canon website.
For Mac OS:
To connect an additional computer to the machine via LAN, or to change from USB to LAN connection,
follow the instructions on the Canon website.
287 

Printing Network SettingsUse the operation panel to print the machine's current network settings.
Important

EncryptionEncryption methodNone/WEP/TKIP/AESWEP Key LengthWEP key length (bits)Inactive/128/64AuthenticationAuthentication methodNone/auto/open/shared/WPA-PSK/WPA2-PSKSignal StrengthSignal strength0 to 100 [%]TCP/IPv4TCP/IPv4EnableIP AddressIP addressXXX.XXX.XXX.XXXSubnet MaskSubnet maskXXX.XXX.XXX.XXXDefault GatewayDefault gatewayXXX.XXX.XXX.XXXTCP/IPv6TCP/IPv6Enable/DisableIP Address *2IP addressXXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXSubnet Prefix Length *2Subnet prefix lengthXXXDefault Gateway...

Default Gateway *2Default gatewayXXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXIPsec *3IPsec settingActiveSecurity Protocol *3Security method