Canon printer PIXMA MG6620 User Manual

5.
Complete the setup
Click  OK.
When you execute print, the document will be enlarged or reduced to fit to the page size.
371 

Scaled Printing
The procedure for printing a document with pages enlarged or reduced is as follows:
1.
Open the printer driver setup window
2.
Set scaled printingSelect  Scaled  from the  Page Layout  list on the Page Setup  tab.
3.
Select the paper size of the document
Using  Page Size , select the page size that is set with your application software.
4.
Set the scaling rate by using one of the following methods:
•
Select a Printer Paper Size
When the printer paper size is smaller than the  Page Size,...

•
Specify a scaling factorDirectly type in a value into the  Scaling box.
The current settings are displayed in the settings preview on the left side of the printer driver.
5.
Complete the setup
Click  OK.
When you execute print, the document will be printed with the specified scale.
Important
•
When the application software which you used to create the original has the scaled printing function,
configure the settings on your application software. You do not need to configure the same setting in
the...

Note•
Selecting Scaled changes the printable area of the document.374 

Page Layout PrintingThe page layout printing function allows you to print more than one page image on a single sheet of paper.
The procedure for performing page layout printing is as follows:
1.
Open the printer driver setup window
2.
Set page layout printing
Select  Page Layout  from the Page Layout  list on the Page Setup  tab.
The current settings are displayed in the settings preview on the left side of the printer driver.
3.
Select the print paper size
Select the size of the paper loaded in the...

PagesTo change the number of pages to be printed on a single sheet of paper, select the number of
pages from the list.
Page Order To change the page arrangement order, select a placement method from the list.
Page Border To print a page border around each document page, check this check box.
5.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute print, the specified number of pages will be arranged on each sheet of paper in the specified order.
376 

Tiling/Poster PrintingThe tiling/poster printing function allows you to enlarge image data, divide it into several pages, and print
these pages on separate sheets of paper. You can also paste the pages together to create a large print like
a poster.
The procedure for performing tiling/poster printing is as follows:
Setting Tiling/Poster Printing
1.
Open the printer driver setup window
2.
Set tiling/poster printing
Select  Tiling/Poster  from the Page Layout  list on the Page Setup  tab.
The current...

If necessary, click Specify..., specify the following settings in the  Tiling/Poster Printing dialog box,
and then click  OK.
Image Divisions
Select the number of divisions (vertical x horizontal).As the number of divisions increases, the number of sheets used for printing increases. If you are
pasting pages together to create a poster, increasing the number of divisions allows you to create
a larger poster.
Print "Cut/Paste" in margins To leave out words "Cut" and "Paste",...

Note
•
Click the deleted pages to display them again.
•
Right-click the settings preview to select Print all pages or Delete all pages .
2.
Complete the setup
After completing the page selection, click  OK.
When you execute print, only specified pages will be printed.
Important
•
Since tiling/poster printing enlarges the document when printing it, the print results may become coarse.
379 

Booklet PrintingThe booklet printing function allows you to print data for a booklet. Data is printed on both sides of the
paper. This type of printing ensures that pages can be collated properly, in page number order, when the
printed sheets are folded and stapled at the center.
The procedure for performing booklet printing is as follows:
1.
Open the printer driver setup window
2.
Set booklet printing
Select  Booklet  from the  Page Layout  list on the Page Setup  tab.
The current settings are displayed...