Canon printer PIXMA MG5722 User Manual

Setting Items for CopyingYou can change the copy settings such as magnification and intensity.
Print Settings Screen
Note

Two-Sided Copying
563 

Reducing/Enlarging CopiesYou can specify the magnification optionally or select the preset-ratio copying or fit-to-page copying.
The LCD below is displayed when you press the right  Function button in the Copy standby screen. Select
the reduction/enlargement method from  Magnif..
Note

If you select other than Fit to page and press the right  Function button, Magnification  screen is
displayed. Use the 
 button to specify the magnification.
Note

Two-Sided CopyingWhen you select  2-sided for 2-sidedPrintSetting  in Standard copy , you can copy two original pages onto
the both sides of a single sheet of paper.
Press the right  Function button to select the orientation and the stapling side.

When checking orientation:
When you are using the preview screen, the screen below is displayed before copying starts so that you can check the orientation.1.
Rotate
If you press the right  Function button, the original rotates by 180 degrees.
2.
Rescan
If you press the left  Function button, the original is rescanned.
Press the  OK button to start scanning.
When scanning is finished: The screen below appears after scanning each sheet of original.
Remove the sheet of original from the platen glass after...

Special Copy MenuThe following menus are selectable in the  Advanced print menu to copy originals.Borderless copy You can copy images so that they fill the entire page without borders.
Copying without Borders
Frame erase copy When copying thick originals such as books, you can make a copy without black margins around the image
and gutter shadows.
Copying Thick Originals Such as Books
Photo copy You can copy all photos you scanned.
Copying Photos
Note

Copying Two Pages onto Single PageWhen you select  2-on-1 copy for Layout  in Standard copy , you can copy two original pages onto a single
sheet of paper by reducing each image.
Press the right  Function button on the Copy standby screen to display the print settings screen and select
2-on-1 copy  for Layout .
Press the right  Function button to specify the orientation and the advanced layout.

For more on two-sided copy function:
Two-Sided Copying
When checking orientation:
When you are using the preview screen, the screen below is displayed before copying starts so that you can check the orientation.
1.
Rotate
If you press the right  Function button, the original rotates by 180 degrees.
2.
Rescan
If you press the left  Function button, the original is rescanned.
Press the  OK button to start scanning.
When scanning is finished: The screen below appears after scanning the first sheet of...