Canon printer PIXMA MG5722 User Manual

Wireless LAN securityInactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-PSK(TKIP)/WPA2-PSK(AES)IPv4 addressXXX. XXX. XXX. XXX (12 characters)IPv4 subnet maskXXX. XXX. XXX. XXX (12 characters)IPv4 default gatewayXXX. XXX. XXX. XXX (12 characters)IPv6 addressXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)IPv6 subnet prefix lengthXXX (up to 3 digits)IPv6 default gatewayXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)MAC addressXX:XX:XX:XX:XX:XX (12 characters)IPsec...

IPv6 subnet prefix lengthXXX (up to 3 digits)IPv6 default gatewayXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)MAC addressXX:XX:XX:XX:XX:XX (12 characters)IPsec settingsDisablePre-shared keyXXXXXXXXXXXXXXXX (16 characters)Printer nameXXXXXXXXXXXXXXX (up to 15 characters)Bonjour service nameXXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)Direct connection device nameXXXXXX-XXXXXXseries
("XX" represents alphanumeric characters.)

Note

Using Machine with Direct Connection
254 

Device user settings

PictBridge print settingsYou can change the print settings when printing from a PictBridge (Wireless LAN) compliant device.
Set the print settings to  Default on the PictBridge (Wireless LAN) compliant device when you want to print
according to the settings on the machine.
To change print settings from the PictBridge (Wireless LAN) compliant device:
Settings on PictBridge (Wireless LAN) Compliant Device
1.
Page size
Select the paper size when printing directly from a PictBridge (Wireless LAN) compliant...

Language selectionChanges the language for messages and menus on the LCD.
258 

Firmware updateYou can update the firmware of the machine, check the firmware version, or perform settings of a
notification screen, a DNS server and a proxy server.
Note

Cassette settingsBy registering the paper size and the media type loaded in the cassette, you can prevent the machine frommisprinting by displaying the message before printing starts when the paper size or the media type of the
loaded paper differs from the print settings.
For details:
Paper Settings