Canon printer PIXMA MG5720 User Manual

Use normal-size printingPrint without reducing the page.
Use reduced printing Reduce the page slightly during printing.
5.
Specify the side to be stapled
The best  Stapling Side  is selected automatically from the  Orientation and Page Layout  settings. To
change the setting, select another stapling side from the list.
6.
Set the margin width
If necessary, click  Specify Margin... and set the margin width, and then click  OK.
7.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute...

3.
Select the layoutSelect  Normal-size , Fit-to-Page , Scaled , or Page Layout  from the Page Layout  list.
4.
Specify the side to be stapled
The best  Stapling Side  is selected automatically from the  Orientation and Page Layout  settings. To
change the setting, select another stapling side from the list.
5.
Set the margin width
If necessary, click  Specify Margin... and set the margin width, and then click  OK.
6.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute print, the...

Related Topic
Changing the Printer Operation Mode403 

Stamp/Background PrintingStamp  or Background  may be unavailable when certain printer drivers or operating environments are used.
The  Stamp  function allows you to print a stamp text or a bitmap over or behind document data. It also
allows you to print date, time and user name. The  Background function allows you to print a light illustration
behind the document data.
The procedure for performing stamp/background printing is as follows:
Printing a Stamp
"CONFIDENTIAL," "IMPORTANT," and...

3.Select a stamp
Check the  Stamp check box, and select the stamp to be used from the list.
The current settings are displayed in the settings preview on the left side of the  Page Setup tab.4.
Set the stamp details
If necessary, specify the following settings, and then click  OK.
Define Stamp... button To 
change the stamp text, bitmap, or position , click this.
Place stamp over text To print the stamp on the front of the document, check this check box.
Note

Select Background... buttonTo 
use another background or change the layout or density of a background , click this.
Background first page only To print the background only on the first page, check this check box.
5.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute print, the data is printed with the specified background.
Important

Registering a StampThis feature may be unavailable when certain printer drivers or operating environments are used.
You can create and register a new stamp. You can also change and re-register some of the settings of an
existing stamp. Unnecessary stamps can be deleted at any time.
The procedure for registering a new stamp is as follows:
Registering a New Stamp1.
Open the printer driver setup window
2.
Click  Stamp/Background...  (Stamp... ) on the Page Setup  tab
The Stamp/Background  (Stamp ) dialog...

4.
Configure the stamp while viewing the preview window

6.Complete the setup
Click  OK. The  Stamp/Background  (Stamp ) dialog box opens again.
The registered title appears in the  Stamp list.
Changing and Registering Some of Stamp Settings1.
Select the stamp for which the settings are to be changed
Select the  Stamp check box in the  Stamp/Background  (Stamp ) dialog box. Then from the list, select
the title of the stamp to be changed.
2.
Click  Define Stamp...
The  Stamp Settings  dialog box opens.
3.
Configure the stamp while viewing the preview window
4....

Registering Image Data to be Used as a BackgroundThis feature may be unavailable when certain printer drivers or operating environments are used.
You can select a bitmap file (.bmp) and register it as a new background. You can also change and register
some of the settings of an existing background. An unnecessary background can be deleted.
The procedure for registering image data to be used as a background is as follows:
Registering New Background1.
Open the printer driver setup window
2.
Click...