Canon printer PIXMA MG5720 User Manual

Note

Printer statusThis function displays printer information such as the remaining ink amount, the status, and detailederror information.
You can also connect to the ink purchase site or support page, and use Web Services.
Utilities This function allows you to set and execute the printer utility functions such as cleaning.
Device settings This function allows you to change the printer settings such as the quiet setting, the energy saving
settings, and the print settings.
AirPrint settings This function...

Firmware updateThis function allows you to update the firmware and check version information.
Language selection This function allows you to change the language on the display.
Manual (Online) This function displays the  2QOLQH0DQXDO.6.
When you finish checking printer status and changing printer settings, select  Log off.
7.
Close web browser.
153 

Handling Paper, Originals, Ink Tanks, etc.
Loading Paper
Loading Plain Paper / Photo Paper
Loading Envelopes
Loading Originals
Loading Originals on the Platen Glass
How to Load Originals for Each Function
Originals You Can Load
How to Detach / Attach the Document Cover
Replacing Ink
Replacing Ink
Checking Ink Status
154 

Loading Paper
Loading Plain Paper / Photo Paper
Loading Envelopes
155 

Loading Plain Paper / Photo PaperYou can load plain paper or photo paper.
Important

3.
Holding the right tab on the front cover, pull out the cassette until it stops.
4.
Use the right paper guide (A) to slide both paper guides all the way out.
5.
Load the paper in the center of the cassette WITH THE PRINT SIDE FACING DOWN.
Push the paper stack all the way to the back of the cassette.
Important

6.
Slide the right paper guide (A) to align the paper guides with both sides of the paper stack.
Do not slide the paper guides too hard against the paper. The paper may not be fed properly.
Note

7.Holding the right tab on the front cover, push the cassette back until the arrow () on the
front cover is aligned with the arrow (
) on the machine.
After pushing the cassette back, the paper information registration screen is displayed on the LCD.
8.
Select the size and type of the loaded paper in the cassette at  Page size
 and Type , then
press the  OK button.
If a message is displayed on the screen, follow the directions in the message to complete registration.
Paper Settings
9.
Extend the paper...

Important