Canon printer PIXMA MG5622 User Manual

Rear View
(1) transport unitOpen to remove jammed paper.
(2) power cord connector Plug in the supplied power cord.
(3) USB port Plug in the USB cable to connect the machine with a computer.
Important
•
Do not touch the metal casing.
•
Do not plug in or unplug the USB cable while the machine is printing or scanning originals with thecomputer.
131 

Inside View
(1) ink lampsLights or flashes to indicate the ink tank status.
Checking the Ink Status with the Ink Lamps
(2) print head holder The print head is pre-installed.
Note
•
For details on replacing an ink tank, see Replacing an Ink Tank .
132 

Operation Panel* All lamps on the operation panel are shown lit in the figure below for explanatory purposes.
(1) ON button/POWER lamp Turns the power on or off. Lights after flashing when the power is turned on. Before turning on thepower, make sure that the document cover is closed.
Turning the Machine On and Off
(2) HOME button Used to display the  HOME screen.
LCD and Operation Panel
(3) LCD (Liquid Crystal Display) Displays messages, menu items, and the operational status.
(4) + - buttons Specifies...

Using the Function Buttons
(13) Wi-Fi lamp Lights or flashes to indicate the wireless LAN status.
Lights: Wireless LAN connection is enabled.
Flashes: Printing or scanning over wireless LAN. Also flashes while configuring the wireless LANconnection.
134 

About the Power Supply of the Machine
Confirming that the Power Is On
Turning the Machine On and Off
Notice for the Power Plug/Power Cord
Notice for Unplugging the Power Cord
135 

Confirming that the Power Is OnThe  POWER  lamp is lit when the machine is turned on.
Even if the LCD is off, if the  POWER lamp is lit, the machine is on.
Note
•
It may take a while for the machine to start printing immediately after you turn on the machine.
•
The LCD will turn off if the machine is not operated for about 5 minutes. To restore the display, press
any button except the  ON button or perform the print operation. You cannot change the wait time before
the LCD turns off.
136 

Turning the Machine On and OffTurning on the machine1.
Press the  ON button to turn on the machine.
The  POWER  lamp flashes and then remains lit.
Confirming that the Power Is On
Note
•
It may take a while for the machine to start printing immediately after you turn on the machine.
•
If the Alarm  lamp lights up or flashes and an error message is displayed on the LCD, see A
Message Is Displayed .
•
You can set the machine to automatically turn on when a print or scan operation is performed
from a...

Important•
When you unplug the power cord after turning off the machine, be sure to confirm that the
POWER  lamp is off.
Note
•
You can set the machine to automatically turn off when no operations are performed or no print
jobs are sent to the machine for a certain interval. This is the default setting. For details on the
auto power off feature, see below.
From the machine
About ECO settings
From the computer
Managing the Printer Power
138 

Notice for the Power Plug/Power CordUnplug the power cord once a month to confirm that the power plug/power cord does not have anythingunusual described below.•
The power plug/power cord is hot.
•
The power plug/power cord is rusty.
•
The power plug/power cord is bent.
•
The power plug/power cord is worn.
•
The power plug/power cord is split.
Caution
•
If you find anything unusual with the power plug/power cord described above, unplug the power cord
and call for service. Using the machine with one of the...

Notice for Unplugging the Power CordTo unplug the power cord, follow the procedure below.
Important
•
When you unplug the power cord, press the  ON button, then confirm that the  POWER lamp is off.
Unplugging the power cord while the  POWER lamp is lit or flashing may cause drying or clogging of the
print head and print quality may be reduced.
1.
Press the  ON button to turn the machine off.
2.
Confirm that the  POWER lamp is off.
3.
Unplug the power cord.
The specification of the power cord differs...