Canon printer PIXMA MG5120 User Manual

							89
2
3
1F
G
I
H
1011
3  Load Paper
Prepare the Paper Support (F).Move the Paper 
Guides (G) to both 
edges.Load paper in the center of the 
Rear Tray (H).
Load paper in portrait orientation with 
the printing side facing up.
Slide the left and right Paper 
Guides against both edges of the 
paper.
Make sure that the height of the paper 
stack does not exceed the line (I).
For details on how to handle 
paper, refer to "Loading Paper" 
in the on-screen manual: 
Basic Guide after installation 
is complete.
•
1. 
Open it.
2.  Withdraw it upwards.
3.  Tilt it back.
Load specialty paper including 
photo paper in the Rear Tray.
• 
						

							0
4
To use the machine by connecting it to a computer, 
software including the drivers needs to be copied 
(installed) to the computer's hard disk. The 
installation process takes about 20 minutes. (The 
installation time varies depending on the computer 
environment or the number of application software to 
be installed.)
•
If you connect the machine via USB cable before installing the 
software:
□
If the dialog box closes, proceed to 
 on page 11.
1. Remove the USB cable 
connected to your computer.
2

.   Click  Cancel .
3

.   Proceed to 
 on page 11.
Do not connect the USB cable yet.
Easy-WebPrint EX
□
Easy-WebPrint EX is Web print software that is installed on the computer 
when installing the supplied software. Internet Explorer 7 or later is 
required to use this software. An Internet connection is required for 
installation.
For Windows 7
1. Remove the USB cable connected to your computer.
2.  Proceed to 
 on page 11.
For Windows Vista/Windows XP
This dialog box may appear.
Quit all running applications before installation.
Log on as the administrator (or a member of the 
Administrators group).
Do not switch users during the installation process.
Internet connection may be required during the 
installation. Connection fees may apply. Consult the 
internet service provider.
It may be necessary to restart your computer during 
the installation process. Follow the on-screen 
instructions and do not remove the  Setup CD-ROM 
during restarting.  
The installation resumes once your computer has 
restarted. 
For the system requirements, refer to "6 
Specifications".
•
•
•
•
•
•
Install the Software 
						

							21
A
3
3
4  Install the Software
Press the ON button (A) to TURN 
OFF THE MACHINE.
Operating noise may continue for up to 
35 seconds until the machine turns off.
Turn on the computer, then insert 
the Setup CD-ROM into the CD-
ROM drive.
If you are using Windows, the setup 
program starts automatically.For Windows
Click Run Msetup4.exe on the AutoPlay screen, then click 
Yes or Continue  on the User Account Control dialog box.
If the User Account Control dialog box reappears in following 
steps, click Yes or Continue .
If you do not know your administrator name or password, 
click the help button, then follow the on-screen instructions. If the CD-ROM folder does not open automatically, double-
click the CD-ROM icon on the desktop.
Double-click the  Setup icon of the CD-ROM folder 
to proceed to the following screen. Enter your 
administrator name and password, then click  OK.
Do NOT connect the USB 
cable to the computer and 
the machine yet. If you have 
already connected the cable, 
disconnect it now.
•
If the program does not start 
automatically, double-click the 
CD-ROM icon in 
Computer or 
My Computer. When the CD-
ROM contents appear, double-
click MSETUP4.EXE.
•
Windows 7/Windows Vista
Windows XP 
						

							54
4  Install the Software
Click Install.
Click Easy Install.
The drivers, application software, and on-screen manuals are installed.
If you want to select particular items to install, click  Custom Install.
• Follow any on-screen instructions to proceed with the software 
installation. 
						

							B
4  Install the Software
When the serial number is not displayed on the 
registration screen automatically, input the serial 
number located inside the machine (as shown in 
the illustration).Necessary Information for the User 
Registration
□
If the Extended Survey 
Program  screen appears
□
If you can agree to Extended 
Survey Program, click Agree. 
If you click Do not agree, the 
Extended Survey Program will not 
be installed. (This has no effect on 
the machine's functionality.)
Important Information for the Installation
USB Port
□
When the Printer Connection  screen appears, 
connect the machine to the computer with a USB 
cable. 
After connecting the cable, TURN ON THE 
MACHINE. 
The USB Port is located on the right side at the 
back of the machine.
If the power is on, the Print Head Holder 
will move when the Scanning Unit 
(Cover) (B) is opened.
• 
						

							76
4  Install the Software
Click Exit to complete the installation.
Congratulations! Setup is complete. 
Proceed to page 15 for information 
regarding the Solution Menu EX and 
the on-screen manual or page 16 to 
start using the machine.
For Macintosh
It is necessary to restart the computer before 
scanning using the Operation Panel on the machine 
for the first time.
Remove the Setup CD-ROM and keep it in a safe 
place. Installing the XPS Printer 
Driver
□
In Windows 7 and Windows 
Vista SP1 or later, the XPS 
Printer Driver can be installed 
additionally. To install, perform 
from 
 in "4 Install the 
Software" on page 11. Click 
Custom Install in 
, then 
select XPS Printer Driver in the 
Custom Install screen.
For details on useful functions 
of the XPS Printer Driver, 
refer to the on-screen manual: 
Advanced Guide.
For Windows
Solution Menu EX starts.
For Macintosh
Solution Menu EX starts when clicking  OK in the 
Canon Solution Menu EX  dialog.
The buttons displayed on Solution Menu EX 
may vary depending on the country or region 
of purchase.
• 
						

							
5
S o l u t i o n   M e n u   E X   i s   a   g a t e w a y   t o   f u n c t i o n s   a n d   i n f o r m a t i o n   t h a t   a l l o w   y o u   t o   m a k e   f u l l   u s e   o f   t h e 
m a c h i n e !   F o r   e x a m p l e ,
S o l u t i o n   M e n u   E X
U s e   t h e   O p e r a t i o n   P a n e l   o n   t h e   m a c h i n e   t o   p r i n t   y o u r   o w n   i t e m s   e a s i l y. 
Va r i o u s   a p p l i c a t i o n   s o f t w a r e   a r e   i n s t a l l e d   o n   t h e   c o m p u t e r   a l o n g   w i t h   t h e 
d r i v e r s .   Yo u   c a n   p r i n t   c r e a t i v e   i t e m s   b y   c o r r e c t i n g / e n h a n c i n g   p h o t o s   u s i n g   t h e 
a p p l i c a t i o n   s o f t w a r e . 
F o r   d e t a i l s   o n   h o w   t o   u s e   t h e   a p p l i c a t i o n   s o f t w a r e   a n d   t h e   m a c h i n e ,   r e f e r   t o 
t h e   o n - s c r e e n   m a n u a l .
Open the on-screen manual.
Open various application software.
•
•
Click Help & Settings, then click this icon to open the on-screen manual.
How to open the on-screen manual
How to start Solution Menu EX
Click this icon on the desktop (Windows) or on the Dock (Macintosh) \
to start 
Solution Menu EX.
E a s y - W e b P r i n t   E X
When Easy-WebPrint EX is installed, the Easy-WebPrint EX toolbar 
appears in Internet Explorer. This toolbar can be used any time while 
Internet Explorer is running.
U s e   E a s y - W e b P r i n t   E X   t o   p r i n t   w e b   p a g e s   i n   I n t e r n e t   E x p l o r e r   e a s i l y.   S o m e   o f   i t s   f e a t u r e s   i n c l u d e :
Printing a web page by reducing its size to fit the paper width automatically without cropping edges.
Printing only the pages you want by selecting them from preview.
Printing selected portions of various pages after editing them.
•
•
•
For details on Easy-WebPrint EX, refer to the on-screen manual: Basic Guide.
For details on Solution Menu EX, refer to the on-screen manual: Basic Gu\
ide.
Try Using the Machine 
						

							CF
SD
MS
MS
Duo
CF
SD
MS
MS
Duo
CF
SD
MS
MS
Duo
A
B
5  Try Using the Machine Supported Memory Cards (Adapter required for 
.)
Memory Stick Duo
Memory Stick Micro
RS-MMC Memory Stick
 *TYPE I / TYPE II (3.3V)
Memory Stick PRO Duo
Memory Stick PRO
SD Card
SDHC Card
MultiMediaCard
MultiMediaCard Plus
miniSD Card
miniSDHC Card
microSD Card
microSDHC Card
Compact Flash Card*
Microdrive
xD-Picture Card
xD-Picture Card Type M
xD-Picture Card Type H
You can also print from USB flash drives. For details, refer to "Printing Photos" in 
the on-screen manual:  Basic Guide. Corresponding 
Card Slot
MMCmobile Insert a memory card with 
the labeled side facing 
left.
Insert a memory card 
into the Card Slot in the 
direction of the arrow on 
the label, with the labeled 
side facing left.
Insert only one memory 
card.
The Access lamp (B) 
lights up when a memory 
card is inserted.
•
•
•
•
Inserting a Memory Card
□ Card Slot Location
The Card Slot is located in the area 
indicated by the dotted line. 
Open the Card Slot Cover (A).
P r i n t   P h o t o s   f r o m   a   M e m o r y   C a r d 
						

							12
C
D
E
5  Try Using the Machine
Load 4" x 6" (10 x 15 cm) photo paper in the 
Rear Tray (C) in portrait orientation with the 
printing side facing up.
For details, refer from  in "3 Load Paper" 
on page 9.
•
Make sure that the Paper Output Tray (D) is open. 
If printing starts while the Paper Output Tray is closed, 
it will automatically open.
While the HOME screen appears, open the Card Slot Cover, insert a memory card into the Card 
Slot.
When inserting a memory card into the Card Slot, the photos on the memor\
y card are read and the screen to 
specify photos and the number of copies to print appears.
Make sure that the Access
 lamp (E) has lit up, then close the Card Slot Cover. 
						

							34
2
3
1
G F
5  Try Using the Machine
1. Rotate the Scroll Wheel (F) to display a photo to print.
2.  Press the [ +] or [-] button to specify the number of copies.
3.

  Press the  Color button (G).
Printing will start.
After printing, open the Card Slot Cover, pinch the memory card and pull it 
straight out.
After removing the memory card, close the Card Slot Cover.
For more information on printing from a memory card, 
refer to "Printing Photos" in the on-screen manual:  Basic 
Guide .
Do not remove the memory card while the  Access lamp is flashing. 
Saved data may be damaged.
•
When the machine is ready for printing, the 
Color button lights up.
•