Canon printer PIXMA MG3620 User Manual

Detect the paper width when printing from computerWhen you print from the computer, this function identifies the paper that was loaded into this
printer.
When the paper width detected by the printer differs from the width of the paper specified in  Page
Size  on the  Page Setup  tab, a message is displayed.
To use paper width detection when printing from the computer, select the check box.
Important

Changing Settings from Operation Panel
Quiet setting
Turning on/off Machine Automatically
232 

Quiet settingEnables this function on the machine if you want to reduce the operating noise, such as when printing at
night.
Follow the procedure below to perform setting.1.
Make sure machine is turned on.
2.
Press and hold  Stop button and release it when  Alarm lamp flashes 9 times.
3.
Press Color button.
To disable the function, press the  Black button in step 4.
Important

Turning on/off Machine AutomaticallyYou can enable the machine to turn on/off automatically considering the environment
Turning on Machine Automatically
Turning off Machine Automatically
Turning on Machine Automatically
You can enable the machine to turn on automatically when a scanning command from a computer or
printing data is sent to the machine.
1.
Make sure machine is turned on.
2.
Press and hold  Stop button and release it when  Alarm lamp flashes 14 times.
3.
Press Color button.
To disable the...

Initializing Machine SettingsYou can initialize the machine settings.
Important

Disabling Wireless LAN FunctionFollow the procedure below to disable the wireless LAN.1.
Make sure machine is turned on.
2.
Press and hold  Wi-Fi button and release it when  ON lamp flashes.
3.
Press  Black button twice and press  Wi-Fi button.
When the  ON lamp changed from flashing to lit and the  Wi-Fi lamp goes off, the wireless LAN is
disabled.
Note

Network Connection
Network Connection Tips
237 

Network Connection Tips
Default Network Settings
Cannot Proceed beyond Printer Connection Screen/Connect Cable Screen
Another Printer Found with Same Name
Connecting to Another Computer via LAN/Changing from USB to LAN
Connection
Printing Network Settings
238 

Default Network SettingsLAN Connection DefaultsItemDefaultEnable/disable Wireless LANEnableSSIDBJNPSETUPCommunication modeInfrastructureWireless LAN securityDisableIPv4 IP addressAuto setupIPv6 IP addressAuto setupSet printer nameXXXXXX000000Enable/disable IPv6EnableEnable/disable WSD (WSD settings)EnableTimeout setting (WSD settings)1 minuteEnable/disable Bonjour (Bonjour settings)EnableService name (Bonjour settings)Canon MG3600 seriesLPR protocol settingEnablePictBridge communicationEnable...

Another Printer Found with Same NameWhen the printer is found during setup, other printers with the same name may appear on the resultsscreen.
Select a printer with checking the printer settings against those on detection result screen.