Canon printer PIXMA MG2924 User Manual

ScanStarts scanning.
Note
•
When scanning starts, the progress will be displayed. Click  Cancel to cancel the scan.
•
When scanning is completed, a dialog box prompting you to select the next action may appear.
Follow the prompt to complete. For details, refer to  Status of ScanGear dialog after scanning
in 
Scan Tab  (Preferences  dialog box).
•
It will take time to process the images if the total size of the scanned images exceeds a certain
size. In that case, a warning message appears; it is...

(3) Preview Area
 (Clear)
Deletes the preview image from the Preview area.
It also resets the Toolbar and color adjustment settings.
 (Crop)
Allows you to specify the scan area by dragging the mouse.
 (Move Image)
Allows you to drag the image until the part you want to see is displayed when an image enlarged in
the Preview area does not fit in the screen. You can also move the image using the scroll bars.
 (Enlarge/Reduce)
Allows you to zoom in on the Preview area by clicking the image. Right-click the...

 (Remove Cropping Frame)
Removes the selected cropping frame.
 (Information)
Displays the version of ScanGear and the current scan settings (document type, etc.).
 (Open Guide)
Opens this page.
(3) Preview Area This is where a trial image appears after you click  Preview. You can also check the results of the settings
(image corrections, color adjustments, etc.) made in "
(1) Settings and Operation Buttons ."
When 
 (Thumbnail) is displayed on the Toolbar:
Cropping frames are specified according...

Note
•
You can specify the cropping frame on the displayed image. In thumbnail view, you can only createone cropping frame per image. In whole image view, you can create multiple cropping frames.
Adjusting Cropping Frames (ScanGear)
Related Topic
Scanning in Advanced Mode
Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode
524 

Input Settings
Input Settings allows you to set the following items:
Select Source The type of document to be scanned is displayed. To scan from the Platen, select  Platen; to scan from
the ADF (Auto Document Feeder), select  Document (ADF Simplex) or Document (ADF Duplex) .
Important
•
Some applications do not support continuous scanning from the ADF. For details, refer to the
application's manual.
Note
•
You can select  Document (ADF Duplex)  when using a model supporting ADF duplex scanning.
Paper...

Click Settings...  to open the  Orientation dialog box.
Important
•
The Orientation  dialog box can only be opened when  Select Source is Document (ADF
Simplex)  or Document (ADF Duplex) .
•
Binding Location is displayed when using a model supporting ADF duplex scanning.
•
Binding Location cannot be specified when  Select Source is Document (ADF Simplex) .
Color Mode Select how to scan the document.
Color Select this mode to scan color documents or to create color images. This mode renders the image
in...

Note•
The values you can enter will be within the range of the selected document size. The minimum size
is 96 pixels x 96 pixels when  Output Resolution is 600 dpi, scaled at 100 %.
•
When Auto Crop is performed in whole image view, the aspect ratio will not be maintained since
the size will be prioritized.
•
Refer to "Adjusting Cropping Frames (ScanGear) " for details on cropping frames.
527 

Output Settings
Output Settings allows you to set the following items:
Output Resolution Select the resolution to scan at.
The higher the resolution (value), the more detail in your image. Select a resolution from the options displayed by clicking the button, or enter a value in 1 dpiincrements.
Refer to "Resolution" for your model from Home of the  Online Manual for details.
When Select Source is Platen:
You can enter a value within the range of 25 dpi to 19200 dpi.
When Select Source is...

In whole image view:
When no cropping frame is displayed, the entire Preview area will be scanned. When a cropping
frame is displayed, the portion within the cropping frame will be scanned.
Note
•
To enlarge/reduce the scanned image, enter values into  (Width) and  (Height) in
Output Settings  or specify a value (by 1 %) for  %. Although the maximum value available for
%  depends on the  Output Resolution , it can be specified for up to 19200 dpi (the maximum
available output resolution).
Paper Size (L,...

Note•
Refer to "Adjusting Cropping Frames (ScanGear)" for details on cropping frames.
•
For details on whether or how the cropping frame is initially displayed on a preview image, refer to
Cropping Frame on Previewed Images  in "
Preview Tab" (Preferences  dialog box).
 (Switch Aspect Ratio)
Available when  Output Size is set to anything but  Flexible.
Click this button to rotate the cropping frame. Click again to return it to the original orientation.
Data Size The data size when scanned...