Canon printer PIXMA MG2924 User Manual

Note•
In the XPS printer driver, ICM has become  ICC Profile Matching .
Related Topics
Setting the Print Quality Level (Custom)
Adjusting Color Balance
Adjusting Brightness
Adjusting Intensity
Adjusting Contrast
Adjusting Color Balance Using Sample Patterns (Printer Driver)
Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver)
Specifying Color Correction
Adjusting Colors with the Printer Driver
Printing with ICC Profiles
Printing a Color Document in Monochrome
Displaying the Print Results...

Page Setup tab DescriptionThe  Page Setup  tab allows you to determine how a document is to be arranged on the paper. Also, this tab
allows you to set the number of copies and the order of printing. If the application which created the
document has a similar function, set them with the application.
Settings Preview The paper illustration shows how the original will be laid out on a sheet of paper.
You can check an overall image of the layout.
Page Size Selects a page size.
Ensure that you select the same...

Rotate 180 degreesPrints the document by rotating it 180 degrees against the paper feed direction.
The width of print area and the amount of extension that are configured in other application software will
be reversed vertically and horizontally.
Printer Paper Size Selects the size of paper actually loaded into the printer.
The default setting is  Same as Page Size to perform normal-sized printing.
You can select a printer paper size when you select  Fit-to-Page, Scaled , Page Layout , Tiling/Poster ,
or...

Duplex Printing (Manual)Select whether to print the document to both sides of the paper manually or to one side of the paper.
Check this check box to print the document on both sides.
This function can be used only when  Plain Paper is selected for  Media Type and one of Normal-size ,
Fit-to-Page , Scaled , or Page Layout  is selected.
Stapling Side Selects the stapling margin position.
The printer analyzes the  Orientation and Page Layout  settings, and automatically selects the best
stapling margin...

Custom Paper Size dialog boxThis dialog box allows you to specify the size (width and height) of the custom paper.
Units Select the unit for entering a user-defined paper size.
Paper Size Specifies the  Width and the  Height of the custom paper. Measurement is shown according to the
units specified in  Units.
Page Layout Printing dialog box
This dialog box allows you to select the number of document pages to be placed on one sheet of paper,
the page order, and whether a page border line is to be printed...

Print "Cut/Paste" lines in marginsSpecifies whether to print cut lines that serve as guidelines for pasting together the pages into aposter.
Check this check box to print the cut lines.
Print page range Specifies the printing range. Select  All under normal circumstances.
Select  Pages to specify a specific page or range.
Note
•
If some of the pages have not been printed well, specify the pages that do not need to be printed
by clicking them in the settings preview of the  Page Setup tab. Only...

Disable ICM required from the application softwareDisables the ICM function required from the application software.When an application software uses Windows ICM to print data, unexpected colors may be produced
or the printing speed may decrease. If these problems occur, checking this check box may resolve
the problems.
Important
•
Uncheck this check box under normal circumstances.
•
This function does not work when  ICM is selected for  Color Correction  on the Matching  tab of
the  Manual Color...

Scale images using nearest-neighbor interpolationWhen an image is to be enlarged or reduced when printed, the printer uses a simple interpolationprocess to enlarge or reduce the image.
If the image data in a printed document is not printed clearly, selecting this check box may improve
the results.
Important
•
Uncheck this check box under normal circumstances.
Note
•
Scale images using nearest-neighbor interpolation  can be used only with the XPS printer
driver.
Prevention of Print Data Loss You can...

Place stamp over textSets how the stamp is to be printed over the document.
Check the  Stamp check box to enable this.
Check this check box to print a stamp over the printed document page. The printed data may be
hidden behind the stamp.
Uncheck this check box to print the document data over the stamp. The printed data will not be
hidden behind the stamp. However, the sections of the stamp that are overlapped by the document
may be hidden.
Print semitransparent stamp Sets how the stamp is to be printed...

Stamp TextSpecifies the stamp text string.
Up to 64 characters can be entered.
For  Date/Time/User Name , the creation date/time and user name of the printed object are
displayed in  Stamp Text.
Important
•
Stamp Text appears grayed out and is unavailable if  Date/Time/User Name is selected.
TrueType Font Selects the font for the stamp text string.
Style Selects the font style for the stamp text string.
Size Selects the font size for the stamp text string.
Outline Selects a frame that encloses the stamp...