Canon printer PIXMA MG2920 white User Manual

When scanning is completed, the scanned image appears in the application.
571 

Scanning Using the Control Panel (Windows XP Only)You can scan images via the Control Panel of Windows XP using the WIA driver.
Important
•
When using the scanner or printer with network connection, you cannot scan using the WIA driver.
1.
From the  Start menu, select  Control Panel .
2.
Click Printers and Other Hardware  > Scanners and Cameras , then double-click Canon
XXX series  (where "XXX" is the model name).
The  Scanner and Camera Wizard  dialog box appears.
3.
Click Next.
4.
Select...

BrightnessMove the slider to adjust the brightness. Move it to the left to darken and right to brighten the image.
You can also enter a value (-127 to 127).
Contrast Move the slider to adjust the contrast. Moving it to the left will decrease the contrast of the image,
thus softening the image. Moving it to the right will increase the contrast of the image, thus
sharpening the image. You can also enter a value (-127 to 127).
Resolution (DPI) Enter the resolution. Specify a value between 50 dpi and 600...

Placing Items (When Scanning from a Computer)Learn how to place items on the platen of your scanner or printer. Place items correctly according to the
type of item to be scanned. Otherwise, items may not be scanned correctly.
Important
•
Do not place objects on the document cover. When you open the document cover, the objects may fall into your scanner or printer, resulting in malfunction.
•
Close the document cover when scanning.
Placing Items Place items as described below to scan by detecting the item...

Placing Multiple Items:
Allow 0.4 inch (1 cm) or more space between the edges
(diagonally striped area) of the platen and items, and
between items. Portions placed on the diagonally striped
area cannot be scanned.
 more than 0.4 inch (1 cm)
Note
•
You can place up to 12 items.
•
Positions of slanted items (10 degrees or less) are
corrected automatically.
575 

Network Scan SettingsYou can connect your scanner or printer to a network to share it among multiple computers.
Important
•
Multiple users cannot scan at the same time.
Note
•
Complete the network settings of your scanner or printer beforehand from the Setup CD-ROM or byfollowing the instructions on the web page.
•
With network connection, scanning takes longer than USB connection.
Complete the following settings to enable scanning over a network.
Specifying Your Scanner or Printer
Use IJ Network Scanner...

2.In the notification area on the desktop, right-click  (IJ Network Scanner Selector EX),
then select  Settings....
The Scan-from-PC Settings screen appears.3.
Select your scanner or printer from  Scanners.
Normally, the MAC address of your scanner or printer is already selected after the network setup. In
that case, you do not need to select it again.
Important
•
If multiple scanners exist on the network, multiple model names appear. In that case, you can
select one scanner per model.
4.
Click  OK....

If your scanner or printer still does not appear, refer to "Problems with Network Communication" foryour model from Home of the  Online Manual.
578 

Troubleshooting
The Machine Cannot Be Powered On
Printing Does Not Start
Paper Does Not Feed Properly/"No Paper" Error Occurs
Print Results Not Satisfactory
Ink Is Not Ejected
Paper Jams
If an Error Occurs
Search Each Function
Problems with Network Communication
Problems with Printing
Problems with Printing Quality
Problems with Scanning
Problems with the Machine
Problems with Installation/Downloading
About Errors/Messages Displayed
If You Cannot Resolve the Problem
579 

Problems with Network Communication
Problems with the Machine While Using with Network
Cannot Detect a Machine on a Network
Other Problems with Network
580