Canon printer PIXMA MG2920 white User Manual

PositionSpecifies the stamp position on the page.
Selecting  Custom from the list allows you to enter values for the  X-Position and Y-Position
coordinates directly.
Orientation Specifies the angle of rotation for the stamp. The angle can be set by entering the number of
degrees.
Negative values rotate the stamp clockwise.
Note
•
Orientation  is enabled only when  Text or Date/Time/User Name  is selected for Stamp Type
on the  Stamp tab.
Note
•
Click Defaults  to set the stamp position to  Center and the...

Layout MethodSpecifies how the background image is to be placed on the paper.
When  Custom  is selected, you can set coordinates for  X-Position and Y-Position .
Intensity Adjusts the intensity of the bitmap to be used as a background.
Moving the slider to the right increases the intensity, and moving the slider to the left decreases the
intensity. To print the background at the original bitmap intensity, move the slider to the rightmost
position.
Note
•
Depending on the type of printer driver you are...

Maintenance tab DescriptionThe  Maintenance  tab allows you to perform printer maintenance or change the settings of the printer.
 Cleaning
Performs print head cleaning.
Print head cleaning removes any blockage in the print head nozzles.
Perform cleaning when printing becomes faint, or a specific color fails to print, even though all ink levels are sufficiently high.
 Deep Cleaning
Performs deep cleaning.
Perform deep cleaning when two cleaning attempts do not resolve the print head problem.
Note
•
Deep...

Align the print head immediately after installing the print head.When you click  Print Head Alignment , the 
Start Print Head Alignment dialog box is displayed.
 Nozzle Check
Prints a nozzle check pattern.
Perform this function if printing becomes faint or a specific color fails to print. Print a nozzle check
pattern, and check whether the print head is working properly.
If the print result for a specific color is fainted, or if there are any unprinted sections, click  Cleaning to
clean the print head....

 Power Off
Turns off the printer from the printer driver.
Perform this function to turn off the printer when you cannot press the ON button (POWER button) on the printer because the printer is out of your reach.
You must press the ON button (POWER button) on the printer to turn the printer on again after clicking
this button. When you use this function, you will not be able to turn the printer on from the printer driver.
 Auto Power
Opens the 
Auto Power Settings dialog box .
Specify settings for...

Note•
If you are using the XPS printer driver, the "Canon IJ Status Monitor" becomes the "Canon IJ XPSStatus Monitor".
About Opens the 
About dialog box .
The version of the printer driver, plus a copyright notice, can be checked.
In addition, the language to be used can be switched.
Initial Check Items
Before running  Cleaning or Deep Cleaning , check that the printer power is on, and open the cover of the
printer.
Check the following items for each ink.
•
Check the amount of ink...

Note•
If you do not know how to analyze the printed pattern, see Aligning the Print Head Position from
Your Computer.
Initial Check Items
Before running  Nozzle Check, check that the printer power is on, and open the cover of the printer.
Check the following items for each ink.
•
Check the amount of ink  remaining in the cartridge.
•
Make sure that you push in the ink cartridge completely until you hear a clicking sound.
•
If an orange tape is adhered to the ink cartridge, peel it off completely.
Any...

Auto Power OffSelects the auto power-off setting.
If a printer driver operation or a printer operation is not performed within the specified time, the printer
turns off.
Quiet Settings dialog box When you click  Quiet Settings, the Quiet Settings  dialog box is displayed.
Quiet Settings  dialog box allows you to specify a setting that reduces the operating noise of the printer.
Select when you wish to reduce the operating noise of the printer at night, etc. Using this function may lower the print speed....

About dialog box
When you click  About, the About  dialog box is displayed.
This dialog box displays the version, copyright, and module list of the printer driver. You can select the
language to be used and switch the language displayed in the setup window.
Modules Lists the printer driver modules.
Language Specifies the language you wish to use in the 
printer driver setup window .
Important
•
If the font for displaying the language of your choice is not installed in your system, the
characters will be...

Canon IJ Preview DescriptionCanon IJ Preview is an application software that displays what the print result will look like before adocument is actually printed.
The preview reflects the information that is set within the printer driver and allows you to check the
document layout, print order, and number of pages. You can also change the media type and paper source
settings.
When you want to display a preview before printing, open the 
printer driver setup window , and check the
Preview before printing...