Canon printer PIXMA MG2920 white User Manual

3.Search...
The  Search  screen is displayed to select an access point to connect to.
Search Screen
Note
•
When IJ Network Tool runs over a LAN, the button is grayed out and cannot be selected. Connect
the printer and the computer with a USB cable temporarily to change the settings.
4.
Encryption Method:
Select the encryption method used over the wireless LAN.
Do not use Select to disable encryption.
Use WEP Transmission is encrypted using a WEP key you specified.
If a WEP key has not been set, the  WEP...

Search Screen
Note
•
This screen is not available depending on the printer you are using.
The access points detected are listed.
1.
Detected Access Points: The signal strength from the access point, encryption type, name of access point, and the radio channelcan be confirmed.
Important
•
If you connect to a network that is not protected with security measures, there is a risk ofdisclosing data such as your personal information to a third party.
Note
•
Signal strength is displayed as follows.
: Good
:...

3.SetClick to set the access point's SSID in  SSID: on the  Wireless LAN  sheet.
Note
•
The WEP Details  screen or the  WPA/WPA2 Details  screen appears if the selected access point
is encrypted. In this case, configure the details to use the same encryption settings set to the access point.
•
Access points that cannot be used by this machine (including those configured to use different
encryption methods) are displayed grayed out and cannot be configured.
213 

WEP Details Screen
Note
•
This screen is not available depending on the printer you are using.
Specify the printer WEP settings.
Note
•
When changing the password (WEP key) of the printer, the same change must be made to the
password (WEP key) of the access point.
1.
WEP Key:
Enter the same key as the one set to the access point.
The number of characters and character type that can be entered differ depending on the combination of the key length and key format.
 Key Length64bit128bitKey FormatASCII5...

WPA/WPA2 Details Screen
Note
•
This screen is not available depending on the printer you are using.
Specify the printer WPA/WPA2 settings.
The value displayed on the screen differs depending on the present settings.
1.
Authentication Type:
Displays the type of authentication used for client authentication. This machine supports the PSK authentication method.
2.
Dynamic Encryption Type:
Displays the dynamic encryption method.
3.
Change Settings... Displays the  Authentication Type Confirmation  screen....

Authentication Type Confirmation Screen
Note
•
This screen is not available depending on the printer you are using.
Type of authentication used for client authentication is displayed.
1.
Authentication Type Type of authentication used for client authentication is displayed.PSK This machine supports the  PSK authentication method.
This authentication type  PSK uses a passphrase.
216 

PSK:Passphrase and Dynamic Encryption Setup Screen
Note
•
This screen is not available depending on the printer you are using.
Enter the passphrase and select the dynamic encryption method.
1.
Passphrase:
Enter the passphrase set to the access point. The passphrase should be a string of 8 to 63 alphanumeric
characters or a 64-digit hexadecimal value.
If you do not know the access point passphrase, refer to the instruction manual provided with the access point or contact its manufacturer.
2.
Dynamic...

Setup Information Confirmation Screen
Note
•
This screen is not available depending on the printer you are using.
Displays the settings used for client authentication.
Confirm the settings and click  Finish.
218 

Wired LAN Sheet
Note
•
This screen is not available depending on the printer you are using.
Allows you to set the printer with wired LAN connection.
To display the  Wired LAN sheet, click the  Wired LAN tab on the Configuration  screen.
1.
TCP/IP Setup:
Sets the IP address of the printer to be used over the LAN. Specify a value appropriate for your network
environment.
Get IP address automatically Select this option to use an IP address automatically assigned by a DHCP server. DHCP server
functionality...

Admin Password SheetSet a password for the printer to allow specific people to perform setup and configurations operation.
To display the  Admin Password  sheet, click the Admin Password  tab on the Configuration  screen.1.
Use admin password
Set an administrator password with privileges to set up and change detailed options. To use this feature,
select this check box and enter a password.
2.
Password:
Enter the password to set.
3.
Password Confirmation:
Enter the password again for confirmation....