Canon printer PIXMA MG2920 User Manual

Quiet SettingsThe silent function allows you to reduce the operating noise of this machine. Use this when you wish toreduce the operating noise such as when scanning or printing at night.
Click  Settings...  to set the quiet mode.
Note
•
You can set the quiet mode from the operation panel of the machine, the printer driver, or
ScanGear.
No matter how the setting is made, it applies to operations from the operation panel of the machine
or when printing/scanning from a computer, etc.
•
Scanning or printing...

Calibration SettingsWhen you set  Execute at Every Scan  to ON , the scanner will be calibrated every time before
previewing and scanning, to reproduce correct color tones in scanned images.
Note
•
Even when  Execute at Every Scan  is set to OFF, the scanner may be calibrated automatically in
some cases (such as immediately after you turn the machine on).
•
Calibration may take time depending on your computer.
542 

Preview TabOn the  Preview  tab, you can specify the following settings.
Preview at Start of ScanGear
Select what to do with Preview when ScanGear (scanner driver) is started.
Automatically Execute Preview ScanGear will automatically start previewing at startup.
Display Saved Preview Image The previously previewed image will be displayed.
The Color Adjustment Button settings, the Toolbar settings, and the  Advanced Mode tab settings
are also saved.
None No preview image will be displayed at startup....

LargerDisplays 105 % (in width and height) of the area displayed for the standard size.
Standard The standard size.
Smaller Displays 95 % (in width and height) of the area displayed for the standard size.
Note
•
When you change the  Cropping Size for Thumbnail View  setting, the preview images will be
refreshed and cropped to the new size. As the preview images are refreshed, the color
adjustments and other settings applied to them are reset.
544 

Scan TabOn the  Scan tab, you can specify the following settings.
Status of ScanGear dialog after scanning
Select what to do with ScanGear (scanner driver) after scanning images.
Close ScanGear automatically Select this to return to the original application when scanning is completed.
Do not close ScanGear automatically Select this to return to the ScanGear screen for another scan when scanning is completed.
Display the dialog to select next action Select this to open a screen and select what to do when...

Color Settings TabOn the  Color Settings  tab, you can specify the following settings.
Color Adjustment
Select one of the following.
Recommended Select this to vividly reproduce the tone of a document on the screen. It is recommended that you
normally select this setting.
Color Matching Select this to automatically match the scanner, monitor, and color printer colors, thus reducing time andtrouble to manually match the monitor and printer colors.
Source(Scanner) Select scanner profile.
Target Select...

Note•
Depending on your scanner or printer, this setting may not be available when scanning from the ADF
(Auto Document Feeder).
•
You can select one when  Color Mode is Color  or Grayscale .
•
Color Matching is available when ScanGear, monitor, color management-compliant application (such as
Adobe Photoshop), and printer are set up correctly.
Refer to the corresponding manual for the monitor, printer, and application settings.
Monitor Gamma By setting the gamma value of a monitor, you can adjust the...

Placing Items (When Scanning from a Computer)Learn how to place items on the platen or ADF (Auto Document Feeder) of your scanner or printer. Placeitems correctly according to the type of item to be scanned. Otherwise, items may not be scanned correctly.
Important
•
Do not place objects on the document cover. When you open the document cover, the objects may fallinto your scanner or printer, resulting in malfunction.
•
Close the document cover when scanning.
•
Do not touch the operation panel buttons or...

the platen may be saved as PDF files. To save in a
format other than PDF, scan by specifying the data
format.
Placing Multiple Items:
Allow 0.4 inch (1 cm) or more space between the edges
(diagonally striped area) of the platen and items, and
between items. Portions placed on the diagonally striped
area cannot be scanned.
 more than 0.4 inch (1 cm)
Note
•
You can place up to 12 items.
•
You can place up to four items when the  Compress
scanned images upon transfer  checkbox is selected
in the Settings...

2.Place the documents on the ADF, then adjust the document guides to the width of the
documents.
Insert the documents face-up until a beep sounds.
Note
•
When scanning duplex documents, place the front sides facing up. They will not be scanned in
the correct page order if placed the other way around.
550