Canon printer PIXMA iP6210D User Manual

Quick Start Guide
Table of Contents
Introduction 1
Preparing the Printer 2
Selecting a language displayed on the LCD 2
Installing the FINE Cartridges 3
Aligning the Print Head 4
Installing the Printer Driver 5
Installing the Printer Driver - Windows 5
Installing the Printer Driver - Macintosh 8
Basic Operations 10
Printing with Windows 10
Printing with Macintosh 11
Replacing a FINE Cartridge 12
QA7-3655-V02 ©CANON INC.2005 PRINTED IN THAILANDBEQA7-3655-V02 The following FINE Cartridges (High Yield) are...

Exif Print
This printer supports ExifPrint.
Exif Print is a standard for enhancing the communication between digital cameras and printers.
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise emissions from a digital 
apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus,”
ICES-003 of the Industry Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils...

1
Introduction
This Quick Start Guide uses the following symbols to indicate important information. Always observe the 
instructions indicated by these symbols.
Instructions that, if ignored, could result in death or serious personal injury caused by incorrect 
operation of the equipment. These must be observed for safe operation.
Instructions that, if ignored, could result in personal injury or material damage caused by incorrect 
operation of the equipment. These must be observed for safe operation....

2
Preparing the Printer
Selecting a language displayed on the LCD
1
11 1Place the printer on a flat surface.
2
22 2Remove the shipping tape from the front 
and back of the printer.
The tape position is subject to change.
3
33 3Open the card slot cover first and the 
front cover next. Pull down and remove 
the protective material on the right side.
4
44 4Close the front cover first and the card 
slot cover next.
5
55 5Plug the power cord into the back of the 
printer.
6
66 6Plug the power cord into the...

3
Installing the FINE Car tridges
• Never attempt to plug the power cord into the power outlet or unplug the power cord when your hands are wet.• Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place heavy objects 
on the power cord.
• Never use any power supply other than the standard power supply available in the country of purchase. 
Using the incorrect voltage and frequency could cause a fire or electric shock.
• Always push the plug all the way into the power...

4
Aligning the Print Head
1
11 1Open the paper support and pull out the 
paper output tray.
2
22 2Load the A4/Letter-sized plain paper, 
aligning it with the right side of the auto 
sheet feeder.
3
33 3Pinch the paper guide and slide it 
against the left side of paper.
4
44 4Align the print head.
Ensure that the message requesting head alignment is 
displayed on the LCD:
• iP6220DUse the  buttons to select Ye s and then press the 
OK button.
• iP6210D
Use the  buttons to select YES and then press the OK...

5
Installing the Printer Driver
Installing the Printer Driver – Windows®
1
11 1Ensure that the printer and computer 
are turned off.
2
22 2Turn on the computer and start 
Windows. If any applications 
automatically run, quit them.
Do NOT turn the printer on at this stage.
3
33 3Place the Setup Software & User’s 
Guide CD-ROM in the CD-ROM drive.
• Before installing the driver, disable all anti-virus programs and automatically loading programs.• The screens shown in this guide are for a computer running...

6
4
44 4Follow the instructions displayed on the 
screen. When the screen shown on the 
left is displayed, click Easy Install.
5
55 5When the list of applications to install 
appears, verify the contents, click 
Install, and then follow the instructions 
on the screen.
Move the cursor over items to display explanations of 
each application below.
6
66 6Read the License Agreement and click 
Yes.
Installation of the printer driver, on-screen manuals, and 
applications will begin. Follow the instructions...

7
8
88 8Turn the printer on.
If a message asking for your confirmation to restart your 
computer appears, click 
OK. The system is restarted 
automatically.
9
99 9When the Installation Results screen 
appears, click Next.
10
1010 10When the Installation completed 
successfully screen appears, click Exit.
If the screen shows a check box for restarting your 
system, you can restart the system instead of just exiting 
the program.
To restart the system, ensure that the check box is 
selected, and then click...

8
Installing the Printer Driver – Macintosh®
1
11 1Ensure that the printer is on, and 
connect the printer to the computer with 
the USB cable.
2
22 2Turn on the Mac OS X.
3
33 3Place the Setup Software & User’s 
Guide CD-ROM in the CD-ROM drive.
4
44 4Double-click the Setup icon.
5
55 5When the Authenticate screen 
appears, enter your administrator name 
and password, then click OK.
6
66 6Follow the instructions displayed on the 
screen. When the screen shown on the 
left is displayed, click Easy...