Canon printer PIXMA iP3000 User Manual

Advanced Printing
37
Using the Bundled Software
TheSetup Software & User’s Guide CD-ROM includes photo applications designed to edit 
the photographs taken by a digital camera and print them as photo-lab quality prints 
without standard white borders. Please use the application(s) suitable for your print 
purposes.
zTo install applications, refer to the Easy Setup Instructions.
zFor details about using the photo applications, refer to the 
Photo Application 
Guide
 included on the Setup Software & User’s...

Advanced Printing
38
Printing Borderless Photographs
This section describes how to print from Easy-PhotoPrint using the Borderless Printing 
mode. Easy-PhotoPrint is included on your 
Setup Software & User’s Guide CD-ROM.
Media Types Suitable for Borderless Printing
zThe following media are compatible with B
Borderless Printing:
- Photo Paper Pro (Letter and 4" x 6")
- Photo Paper Plus Glossy (Letter, 5" x 7", and 4" x 6")
- Photo Paper Plus Semi-gloss (Letter and 4" x...

Advanced Printing
39
3Ensure that the proper paper source is selected.
4Start Easy-PhotoPrint.
This section describes how to print out photographs stored in the folder on the hard 
disk.
(1) Store the photographs you took with your digital camera in a folder on the hard 
disk.
(2) In Windows, click S
Start, select AAll Programs (or PPrograms), CCanon Utilities,EEasy-
PhotoPrint, and E
Easy-PhotoPrint to open the Easy-PhotoPrint.
In Macintosh, double-click the hard disk icon, the A
Applications folder,...

Advanced Printing
40
(2) Click the [[T][S] buttons on the thumbnail of the photograph you want to print 
to specify the number of copies.
Clicking CCorrect/Enhance corrects photographs. For example, using 
this feature, you can correct the red-eye caused by the camera’s 
flash or smooth and beatify the facial skin. For more information, 
refer to the 
Photo Application Guide.
6Select the paper.
This section only describes the steps when you have selected PPaper Feed 
Switch from P
Paper Source. For...

Advanced Printing
41
7Select the layout and print the photograph.
(1) Click the LLayout/Print
tab. 
(2) Select B
Borderless (full).
(3) In Windows, click PPrint.
In Macintosh, click P
Print.
When the confirmation 
message is displayed, 
click O
OK. And then, click 
Print in the P
Print dialog 
box. 

Printing Maintenance
42
Printing Maintenance
Replacing an Ink Tank
When replacing an ink tank, check the model number very carefully. 
The printer will not print properly if the wrong ink tank is used, or installed in the incorrect 
position.
With your printer, ink tanks must be installed in the order of left to right as indicated below.
„Knowing When to Replace Ink Tank
If an ink tank needs replacing, the PPOWER lamp will change from green to orange and 
flash four times, as soon as printing begins. It...

Printing Maintenance
43
The following message appears when ink is empty. Printing will resume as soon as ink tank 
is replaced and the Inner Cover and the Top Cover are closed.
When Low Ink is Detected
The B
BJ Status Monitor appears as soon as a print job starts. [!] indicates a low 
ink level. Obtain a replacement tank as soon as possible.
zClick C
Cancel Printing to cancel the current print job.
The ink tank with [X] symbol is out of ink. 
Replace with a new ink tank.
zPress the R
RESUME/CANCEL button...

Printing Maintenance
44
The following message is displayed when ink tank is empty. Printing will resume as soon as 
ink tank is replaced and the Inner Cover and the Top Cover are closed.
Checking the ink level
(1) Double-click the hard disk icon where the printer driver was installed, the 
Applications folder, and then the U
Utilities folder.
(2) Double-click the P
Printer Setup Utility icon.
When using versions of Mac OS other than Mac OS X v.10.3.x, double-click 
the P
Print Center icon.
(3) Select the...

Printing Maintenance
45
„Replacing Ink Tanks
When an ink tank runs out of ink, replace it using the following steps.
1Ensure that the printer is on, and then push the upper center ( ) of the 
Front Cover to open the Paper Output Tray.
2Open the Top Cover, and pull down the Inner Cover forward to open.
The Print Head Holder moves to the center.
3Remove the empty ink tank.
zHandle ink tanks carefully to avoid staining clothing or the surrounding 
area.
zDiscard empty ink tanks according to the local laws...

Printing Maintenance
46
4Prepare a replacement tank.
(1) Unpack the new ink tank and pull off the orange tape.
(2) Remove the orange protective cap from the bottom of the ink tank and discard it.
zBe sure to remove the clear film from the ink tank in the exact 
order shown in step 4-(1), as failure to follow this step may cause 
the ink to leak and stain your clothes and hands.
zDo not squeeze the side of ink tanks as this may cause the ink to 
leak out and stain your clothes and hands. 
zDo not...