Canon printer PIXMA iP110 User Manual

1200Cause
The print head cover is open.
Action Close the print head cover and wait for a while.
Do not close it while you are replacing an ink tank.
Important

1401Cause
The print head is not installed.
ActionInstall the print head.
If the print head is already installed, remove the print head once and then reinstall it.
If the error is still not resolved, the print head may be damaged. Contact the service center.492 

1403Cause
The print head may be damaged.
Action
Contact the service center.493 

1405Cause
The print head may be damaged.
Action
Contact the service center.494 

1410Cause
The ink tank cannot be recognized.
ActionOpen the print head cover and check that the ink tank which lamp is off is installed properly.
If the front (innermost) part of the ink tank is sticking up, push down on the "Canon" logo on the ink tank to install it properly.
If the ink lamp is off even though the ink tank is installed properly, replace the ink tank.495 

1411Cause
The ink tank cannot be recognized.
ActionOpen the print head cover and check that the ink tank which lamp is off is installed properly.
If the front (innermost) part of the ink tank is sticking up, push down on the "Canon" logo on the ink tank to install it properly.
If the ink lamp is off even though the ink tank is installed properly, replace the ink tank.496 

1600Cause
If the lamp on the ink tank is flashing, ink may have run out.
Action Replacing the ink tank is recommended.
If printing is in progress and you want to continue printing, press the printer's  RESUME/CANCEL button
with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the
printing. The printer may be damaged if printing is continued under the ink out condition.
Note

1660Cause
The ink tank is not installed.
Action
Install the ink tank.498 

1681Cause
More than one ink tanks of the same color are installed. (The lamp on the ink tank flashes.)
Action Confirm that the ink tanks are installed in the appropriate positions.499 

1687Cause
The print head lock lever is not locked or an ink tank is installed improperly.
Action Open the print head cover, then take the corresponding actions below.