Canon printer PIXMA i850 Series User Manual

 
11 
Safety Precautions 
Caution
 
ä 
You may cause injury or damage the printer if you ignore any of these 
safety precautions. 
n 
Choosing a location 
Do not install the printer in a location that is unstable or subject to excessive vibration.
Do not install the printer in locations that are very humid or dusty, in direct sunlight, 
outdoors, or close to a heating source. 
To avoid the risk of Þre or electric shocks, install the printer in a location with an ambient temperature range 
of 5¡C to 35¡C...

 
12 
Safety Precautions 
n 
Power supply 
Never remove the plug by pulling on the cord.
Do not use an extension lead.
Never use a power supply voltage other than that supplied in the country of purchase. 
The correct power supply voltages and frequencies are as follows:
Europe: AC 230V  
± 
 10%, 50Hz
USA/Canada: AC 120V, 60Hz
Australia: AC 240V, 50Hz 

 
13 
Safety Precautions 
n 
Working around the printer 
Never put your hands or Þngers in the printer while it is printing.
Do not place metal objects (paper clips, staples, etc.) or containers of ßammable 
solvents (alcohol, thinners. etc.) on top of the printer.
If any foreign object (metal or liquid) falls into the printer, unplug the power cord and call 
for service. 
n 
Print heads and ink tanks 
For safety reasons store print heads and ink tanks out of the reach of small children. 
If a child...

 
14 
Printer Parts and Their Functions 
Printer Parts and Their Functions 
¥Front View
¥Rear View
¥Inside the Printer
¥Operation Panel 

 
Front View
15 
Printer Parts and Their Functions 
Front View
Paper Guide
When loading paper, ensure 
the left edge just touches 
this guide.
To move the paper guide, 
pinch the knob and slide in 
the appropriate direction.
Paper Rest
Sheet Feeder
Load paper here.  
Paper feeds 
automatically, one sheet 
at a time.
Front Cover
Open to replace the 
ink tanks or remove 
jammed paper. Paper Output TrayOperation Panel
For details, refer to 
Operation Panel.  

 
Rear View
16 
Printer Parts and Their Functions 
Rear View 
USB Port 
Used to connect the printer to a 
computer through a USB 
interface. 
Printer Port (Parallel) 
Used to connect the printer to a 
computer through a parallel 
interface. 

 
Inside the Printer
17 
Printer Parts and Their Functions 
Inside the Printer 
Print Head Holder 
Install the print head here. 
Print Head Lock Lever 
Locks the print head into the holder.  
Once the print head is installed, do not touch this lever. 
Paper Thickness  Lever 
Adjusts the gap between the print head and the surface of the printing paper. 

 
Operation Panel
18 
Printer Parts and Their Functions 
Operation Panel 
POWER Lamp 
Off: the printer is turned off.
Green: the printer is ready to print.
Flashing green: the printer is preparing to print, or is currently printing.
Flashing orange: an error has occurred and the printer is not ready to print.
Flashing orange and green alternately: an error has occurred that may require a service 
call.
POWER Button
Press to turn the printer 
on or off.
RESUME/CANCEL Button
Press to resume printing once...

 
19 
Printer Driver Functions (Windows) 
Printer Driver Functions (Windows) 
¥Opening the Printer Properties Dialog Box
¥Printer Properties Dialog Box Description
¥BJ Status Monitor Functions
¥Cancelling a Print Job
¥Uninstalling Printer Drivers 

 
Opening the Printer Properties Dialog Box
20 
Printer Driver Functions (Windows) 
Opening the Printer Properties Dialog Box
The Printer Properties dialog box can be opened from either within an application, or 
directly from the Windows Start menu.
nOpening the Printer Properties dialog box from your application program
This method is generally used to specify printer settings just before printing.
The operations may vary slightly depending on your application program. This section 
describes only the...