Canon printer MAXIFY MB5020 User Manual

Paper setting for PrintingBy registering the paper size and the media type loaded in the cassette, you can prevent the machine from
misprinting by displaying the message before printing starts when the paper size or the media type of the
loaded paper differs from the print settings.•
When you load paper in the cassette:
The screen to register the cassette paper information is displayed.
Register the paper size and the media type according to the loaded paper.
Important
•
For details on the proper...

◦Paper setting for printing or copying: B5◦
Cassette paper information registered to the machine: A4
When you start printing or copying, a message is displayed.
Confirm the message, then tap OK. When the screen to select the operation is displayed, select one of
the operations below.
Note
•
Depending on the setting, the choices below may not be displayed.
Print with paper in cass. settings Select if you want to print on the paper loaded in the cassette without changing the paper settings.
For example,...

•For details on the proper combination of paper settings you can specify by the printer driver oron the touch screen:
Setting the Media Type with the Printer Driver and on the Printer
Setting the Paper Size with the Printer Driver and on the Printer
Cancel Cancels printing.
Select when you change the paper settings specified for printing or copying. Change the paper settings, then try printing again.
Note
•
You can disable the message which prevents misprinting. When you disable the message, themachine...

Copying
Making Copies Basic
 
Reducing or Enlarging a CopyTwo-Sided Copying
 
About Special Copy MenuCopying Two Pages to Fit onto a SinglePage
 
Copying Four Pages to Fit onto a Single PageCollated Copying
534 

Making CopiesThis section describes the procedure to copy with  Copy.1.
Make sure that the machine is turned on.
2.
Load paper.
3.
Flick the HOME screen, then tap  Copy .
Using the Operation Panel
The Copy standby screen is displayed.
4.
Load the original document on the platen glass or in the ADF.
5.
Specify the settings as necessary.
A.
The copy layout is displayed.
Switch the layout (single-sided/2-on-1/two-sided).
B.
Tap to specify the number of copies.
1.
Tap the numbers to specify the number of...

For details on the setting items:
Setting Items for Copying
E.
Tap to preview an image of the printout on the preview screen.
For details:
Displaying the Preview Screen
F.
Tap to specify the page size.
6.
Press the Color button for color copying, or the  Black button for black & white copying.
The machine starts copying.
Remove the original on the platen glass or from the document output slot after copying is complete.
Important
•
If you load the original on the platen glass, do not open the document...

Adding the Copying Job (Reserve copy)•
When the message informing you that the operation restriction is enabled, ask the administrator ofthe machine you are using.
For details on the operation restriction of the machine:
About the Machine Administration
Adding the Copying Job (Reserve copy)
If you load the original on the platen glass, you can add the copying job while printing (Reserve copy).
The screen below is displayed when you can add the copying job.
Load the original on the platen glass and press...

Displaying the Preview ScreenWhen 
 is displayed on the Copy standby screen, tapping  allows you to preview an image of the
printout on the preview screen.
Important
•
The preview screen is not available when you load the original in the ADF.
•
In the following conditions,  is not displayed when the Copy standby screen is displayed.
•
2-sided  is selected for  2-sidedPrintSetting .
•
2-on-1 copy or 4-on-1 copy  is selected for  Layout.
•
ON is selected for  Collate.
When either of the conditions above is...

D.Tap to specify the magnification.
If you keep touching, the magnification is changed by 10 %.E.
Tap to return to the Copy standby screen.
F.
The magnification currently specified is displayed. Tap to select  Fit to page.
539 

Setting Items for CopyingThe following screen is displayed by tapping  Settings on the Copy standby screen.
Flick to display setting items, then tap the setting item to display the settings. Tap to specify the setting.
Note
•
Some settings cannot be specified in combination with the setting of other setting item or the copy menu. If the setting which cannot be specified in combination is selected, 
 and  Error details  are
displayed on the touch screen. In this case, tap 
 on the upper left on the touch...