Canon printer MAXIFY MB2320 User Manual

You can select one of the preset ratios to reduce or enlarge copies.
Select the appropriate ratio for size of original and page size.
The setting in  Magnif.: 70% A4->A5 /86% A4->B5 /94% A4->LTR /115% B5->A4 /141% A5->A4 /156%
5x7->LTR /183% 4x6->LTR
Note
•
Some of the preset ratios are not available depending on the country or region of purchase.
•
Ratio specified copy
You can specify the copy ratio as a percentage to reduce or enlarge copies.
Note
•
400% MAX  (maximum copy ratio) and  25% MIN (minimum...

Two-Sided CopyingWhen you select  2-sided for 2-sidedPrintSetting  in Copy , you can copy two original pages onto the both
sides of a single sheet of paper.
Select  2-sided , then tap  OK.
If you tap  Advanced  with 2-sided  selected, you can specify the orientation and the stapling side of the
original.
•
When you select  Orientation: Portrait  and Output: Long side bind :
•
When you select Orientation: Portrait  and Output: Short side bind :
•
When you select Orientation: Landscape  and Output: Long...

When Loading the Original on the platen glass:•
Before scanning:
When you select  2-sided for 2-sidedPrintSetting  and the preview function is activated, the machine
starts pre-scanning before scanning the original. When pre-scanning is finished, the screen below
(preview screen) is displayed on the LCD.
A.
Tap to rotate the original by 180 degrees.
B.
Tap to start scanning the original.
C.
Tap to rescan the original.
•
After scanning:
The screen below appears after scanning each sheet of original.
A....

About Special Copy Menu
Copying Thick Originals Such as Books
554 

Copying Thick Originals Such as BooksWhen  ON is selected for  Frame erase copy  in Copy , you can make a copy without black margins around
the image and gutter shadows in copying thick originals such as books. Using this function, you can reduce unnecessary ink consumption.
Note
•
When you use this function, load the original on the platen glass and close the document cover.
•
When the Copy standby screen is displayed, tapping  allows you to preview an image of the printout
on the preview screen....

Copying Two Pages to Fit onto a Single PageWhen you select  2-on-1 copy for Layout  in Copy , you can copy two original pages onto a single sheet of
paper by reducing each image.
Tap  Settings  on the Copy standby screen to display the print settings screen, then select  2-on-1 copy for
Layout .
Select 2-on-1 copy , then tap OK.
If you tap  Advanced  with 2-on-1 copy  selected, you can specify the orientation and the order of the
original.
•
When you select  Orientation: Portrait  and Left to right :
•...

Two-Sided Copying
When Loading the Original on the platen glass:•
Before scanning:
When the preview function is activated, the machine starts pre-scanning before scanning the original.
When pre-scanning is finished, the screen below (preview screen) is displayed on the LCD.
A.
Tap to rotate the original by 180 degrees.
B.
Tap to start scanning the original.
C.
Tap to rescan the original.
•
After scanning:
The screen below appears after scanning each sheet of original.
A.
Tap to start scanning the...

Copying Four Pages to Fit onto a Single PageWhen you select  4-on-1 copy for Layout  in Copy , you can copy four original pages onto a single sheet of
paper by reducing each image. Four different layouts are available.
Select  4-on-1 copy , then tap OK.
If you tap  Advanced  with 4-on-1 copy  selected, you can specify the orientation and the order of the
original.
Note
•
The order is the same regardless of the orientation.
•
When you select  Upper-left to right
•
When you select Upper-right to left
•...

After selecting the order, you can select whether you use the preview screen. If you tap ON, the preview
screen is displayed so that you can check the orientation.
Note
•
This function can be used in combination with Two-sided copy.
If you use this function in combination, you can copy eight original pages on one sheet of paper. In this
case, four original pages are copied on each side of paper.
If you use this function in combination, select  2-sided for 2-sidedPrintSetting , then select the
orientation...

B.Tap to start copying the original already scanned.
Note
•
You can add the copying job while printing.
Adding the Copying Job (Reserve copy)
•
If you use this function in combination with Two-sided copy, the screen above is displayed after
scanning the fourth sheet of original is complete. Follow the on-screen instructions to scan the
rest of originals.
560