Canon printer MAXIFY MB2320 User Manual

Print Area Setup dialog box
When you perform duplex printing, the print area of the document becomes slightly narrower than usual.
Therefore when a document that has small margins is printed, the document may not fit on one page.
This dialog box allows you to set whether the page is to be reduced when printed so that the document
fits in one page.
Use normal-size printing Prints the document pages without reducing them. This is the default setting.
Use reduced printing Slightly reduces each document page...

Important•
Even when this check box is checked, only some of the information in the color profile isdisabled, and the color profile can still be used for printing.
•
Uncheck this check box under normal circumstances.
Disable the paper source setting of the application software Disables the paper feeding method that is set by the application.With some applications such as Microsoft Word, the data may be printed with a feeding method that
differs from the printer driver setting. In this case, check this...

Note•
Scale images using nearest-neighbor interpolation can be used only with the XPS printer
driver.
Prevention of Print Data Loss You can reduce the size of the print data that was created with the application software and then print
the data.
Depending on the application software being used, the image data may be cut off or may not be
printed properly. In such cases, select  On. If you will not be using this function, select  Off.
Important
•
When using this function, the print quality may drop...

Print semitransparent stampSets how the stamp is to be printed over the document.
Check the  Stamp check box to enable this.
Check this check box to print a semi-transparent stamp over the printed document page. Uncheck this check box to print the stamp over the document data. The printed data may be hidden
behind the stamp.
Note
•
You can use  Print semitransparent stamp  only with the XPS printer driver.
Stamp first page only Selects whether the stamp is to be printed on the first page only or on all...

TrueType FontSelects the font for the stamp text string.
Style Selects the font style for the stamp text string.
Size Selects the font size for the stamp text string.
Outline Selects a frame that encloses the stamp text string.If a large font size is selected for  Size, characters may extend outside of the stamp border.
Color/Select Color... Shows the current color for the stamp.
To select a different color, click  Select Color... to open the Color dialog box, and select or create a
color you wish to use...

Note•
Orientation is enabled only when  Text or Date/Time/User Name  is selected for Stamp Type
on the  Stamp tab.
Note
•
Click Defaults  to set the stamp position to  Center and the orientation to 0.
Save settings Tab
The  Save settings  tab allows you to register a new stamp or delete an unnecessary stamp.
Title Enter the title to save the stamp you created.
Up to 64 characters can be entered.
Note
•
Spaces, tabs, and returns cannot be entered at the beginning or end of a title.
Stamps Shows a list of...

Note•
Depending on the type of printer driver you are using and the environment, this function may not beavailable.
•
Click  Defaults  to set File to blank,  Layout Method  to Fill page , and the  Intensity slider to the
middle.
Save settings Tab
The  Save settings  tab allows you to register a new background or delete an unnecessary background.
Title Enter the title to save the background image you specified.
Up to 64 characters can be entered.
Note
•
Spaces, tabs, and returns cannot be entered at the...

Maintenance tab DescriptionThe  Maintenance  tab allows you to perform printer maintenance or change the settings of the printer.
 Cleaning
Performs print head cleaning.
Print head cleaning removes any blockage in the print head nozzles.
Perform cleaning when printing becomes faint, or a specific color fails to print, even though all ink levels are sufficiently high.
 Deep Cleaning
Performs deep cleaning.
Perform deep cleaning when two cleaning attempts do not resolve the print head problem.
Note
•
Deep...

Align the print head immediately after installing the print head.When you click  Print Head Alignment , the 
Start Print Head Alignment dialog box is displayed.
 Nozzle Check
Prints a nozzle check pattern.
Perform this function if printing becomes faint or a specific color fails to print. Print a nozzle check
pattern, and check whether the print head is working properly.
If the print result for a specific color is fainted, or if there are any unprinted sections, click  Cleaning to
clean the print head....

 Custom Settings
Opens the 
Custom Settings dialog box .
Perform this function to change the settings of this printer.
Note
•
If the printer is off or if communication between the printer and the computer is disabled, an error message may appear because the computer cannot collect the printer status.
If this happens, click  OK to display the most recent settings specified on your computer.
View Print History This function starts the Canon IJ XPS preview, and displays the print history.
Note
•
You can use...