Canon printer MAXIFY MB2120 User Manual

PrintingonPostcardsThis section describes the procedure for postcard printing.1.
Load postcard  on the printer
2.
Open the printer driver setup window
3.
Select commonly used settings
Display the  QuickSetup  tab, and for CommonlyUsedSettings , select Standard .
4.
Select the media type
For  MediaType , select InkJetHagaki(A) , InkJetHagaki , HagakiK(A) , HagakiK , Hagaki(A) , or
Hagaki .
Important

8.Complete the setup
Click  OK.
When you execute printing, the data will be printed onto the postcard.
Important

DisplayingthePrintResultsbeforePrintingIf you are using the XPS printer driver, replace "Canon IJ Preview" with "Canon IJ XPS Preview" whenreading this information.
You can display and check the print result before printing.
The procedure for displaying the print result before printing is as follows:
You can also set the print results display on the  QuickSetup tab.1.
Open the printer driver setup window
2.
Set the preview
Check the  Previewbeforeprinting  check box on the Main...

SettingPaperDimensions(CustomSize)You can specify the height and width of paper when its size cannot be selected from the  PageSize. Such a
paper size is called "custom size."
The procedure for specifying a custom size is as follows: You can also set a custom size in  PrinterPaperSize on the QuickSetup  tab.1.
Open the printer driver setup window
2.
Select the paper size
Select  Custom...  for PageSize  on the PageSetup  tab.
The CustomPaperSize  dialog box opens.
3.
Set the custom...

Important

EditingthePrintDocumentorReprintingfromthePrintHistoryThis function is unavailable when the standard IJ printer driver is used.
In the Canon IJ XPS preview window, you can edit the print document or retrieve the document print history to print the document.
The procedure for using the Canon IJ XPS Preview is as follows:PrintCombineDocumentsDeleteDocumentResetDocumentsViewThumbnailsMove DocumentUndoMove PageDeletePage
Note

EditingandPrintingaPrintDocument
When printing multiple documents or pages, you can combine documents, change the print sequence of the documents or pages, or delete documents or pages.1.
Open the printer driver setup window
2.
Set the preview
Check the  Previewbeforeprinting  check box on the Main tab.
3.
Complete the setup
Click  OK.
The Canon IJ XPS Preview will start and the print result will be displayed before printing.
4.
Editing print documents and print pages

the pages to be recovered from among the displayed thumbnail pages. Then from the Edit menu
chose  Pages and then  RestorePage .
After editing the print documents or print pages, you can change the print settings on the  Page
Information , Layout  and ManualColorAdjustment  tabs as necessary.
Important

RelatedTopic
Displaying the Print Results before Printing489 

ChangingthePrintQualityandCorrectingImageData
PrintingaColorDocumentinMonochrome
SpecifyingColorCorrection
OptimalPhotoPrintingofImageData
AdjustingColorswiththePrinterDriver
PrintingwithICCProfiles
AdjustingColorBalance
AdjustingColorBalanceUsingSamplePatterns(PrinterDriver)
AdjustingBrightness
AdjustingIntensity
AdjustingContrast
AdjustingIntensity/ContrastUsingSamplePatterns(PrinterDriver)
490