Canon printer MAXIFY MB2120 User Manual

1.
UseIPv6addressSelect when you use the printer with IPv6 environment.
2.
UseStatelessAddress:
Select when you use an IP address assigned automatically. Use a router compatible with IPv6.
Note

AssigningPrinterInformationFollow the procedure below to assign/change printer location name or device name.
The names appear on  DeviceName: and Location:  on the IJNetworkDeviceSetupUtility  screen.
Note

InitializingNetworkSettingsFollow the procedure below to initializing printer network settings.1.
Start up IJ Network Device Setup Utility.
Detected printers are listed.
2.
Select printer to initialize settings.
Select the printer with  Available displayed on  Status.
3.
Select  ResetLANsettings  on Printer  menu.
The  ConfirmPrinterPassword  screen appears.
For more on the password, refer to 
Administrator Password .
4.
Enter password and click  OK.
5.
Click  Yes on the displayed screen.
6.
Click...

ChangingAdministratorPasswordFollow the procedure below to change the administrator password.1.
Start up IJ Network Device Setup Utility.
Detected printers are listed.
2.
Select printer to change password.
Select the printer with  Available displayed on  Status.
3.
Select  ChangePassword...  on Printer  menu.
The  ChangePrinterPassword  screen appears.
For more on the password, refer to 
Administrator Password .
4.
Enter current password and new password.
5.
Enter new password in  Confirm: again....

SettingCriteriaforPrinterSearch/SearchingSpecificPrinterYou can set the criteria for printer search when you start up IJ Network Device Setup Utility or update the
printer search, or you can search the specific printer.
Changing these settings may detect the printer you want to use if it is not detected
Note

2.Select SpecifiedSearching...  on Option  menu.
The  SpecifiedSearching  screen appears.3.
Select item to specify and enter value.
1.
IPv4Address
Specifies the IPv4 address of the printer you want to search.
2.
IPv6Address
Specifies the IPv6 address of the printer you want to search.
3.
HostName
Specifies the host name of the printer you want to search.
4.
Click  Search .
IJ Network Device Setup Utility starts searching by the specified criteria and detected printers are
listed.
376 

IfWEPDetailsScreenAppearsEnter the password (passphrase) according to wireless router's encryption method if you change a wireless
router to connect to the printer.1.
Enter items below when  WEPDetails screen appears.
1.
WEPKey:
Enter the same key as the one set to the wireless router.
The number of characters and character type that can be entered differ depending on the
combination of the key length and key format.
 KeyLength:64bit128bitKeyFormat:ASCII5 characters13 charactersHexadecimal (...

IfWPA/WPA2DetailsScreenAppearsEnter the password (passphrase) according to wireless router's encryption method if you change a wireless
router to connect to the printer.1.
Enter passphrase when  WPA/WPA2Details screen appears.
Enter the passphrase set to the wireless router. The passphrase should be a string of 8 to 63
alphanumeric characters or a 64-digit hexadecimal value.
If you do not know the wireless router passphrase, refer to the instruction manual provided with the
wireless router or...

CheckingNetworkStatus
CheckingWirelessNetworkStatus
DisplayingComputerNetworkInformation
DisplayingPrinterNetworkInformation
CheckingConnectionStatusbetweenPrinterandWirelessRouter
CheckingNetworkSettingDifference
379 

CheckingWirelessNetworkStatusFollow the procedure below to check the wireless network status (signal strength) between the printer and
computer.
If anything is wrong with the wireless LAN connection, check the network status from this menu.1.
Start up IJ Network Device Setup Utility.
The detected printers are listed.
2.
Select printer to check wireless network status from printer list.
Select the printer with  Available displayed on  Status.
3.
Select  CheckWirelessCommunicationStatus  on Printer...