Canon printer imageCLASS MF3111 User Manual

Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose Feeder)2-13
Paper Handling
2
Orientation of the Document and the Paper Loading
When you place a document on the platen glass, the orientation of the document 
and the orientation of the paper in the cassette or in the multi-purpose feeder are as 
shown below.
Copy
Document
Paper
Cassette Multi-
purpose
feeder
Platen glass
LD_Basic_US.book  Page 13  Monday, January 10, 2005  1:27 PM 

Selecting the Paper Output Area2-14
Paper Handling
2
Selecting the Paper Output Area
Face down paper output delivers paper with the printed side down on the output 
tray. Face up paper output delivers paper with the printed side up from the output 
area. Select the area depending on your purpose by opening or closing the face up 
cover.
Open the face up cover for face up paper output, or close the face up cover and pull 
out the output tray for face down paper output.
IMPORTANT
Do not open or close the...

Selecting the Paper Output Area2-15
Paper Handling
2
Face Down Paper Output Area
The paper is delivered with the printed side down on the output tray. 
Paper is stacked in printed order. 
Close the face up cover, and pull out the output tray.
IMPORTANT
•Do not place the delivered paper back on the output tray. Doing so may result in paper 
jams.
•Do not place objects other than paper on the output tray. Doing so may result in paper 
jams.
Transparenciesface up 1 sheet
face down 10 sheets
Envelopesface up...

Selecting the Paper Output Area2-16
Paper Handling
2
Face Up Paper Output Area
The paper is delivered with the printed side up from the face up paper output at the 
rear of the machine. 
This way is convenient for printing on transparencies, or envelopes which tend to 
curl, because the paper is delivered straight through out of the machine.
Open the face up cover.
•Remove the delivered paper one by one.
IMPORTANT
•Do not pull the paper forcibly.
•This machine has no face up output tray. Remove the...

CHAPTER
Document Requirements3-1
3Document Handling
This chapter describes the types of documents you can scan or copy with this machine and 
how to set them on the platen glass.
Document Requirements
The documents you place on the platen glass for copying or scanning must meet 
these requirements:
* When scanning, and copying a transparent document such as tracing paper or transparencies, place a piece of plain 
white paper behind the document.
NOTE
•When making copies of a small size document, the copy...

Document Requirements3-2
Document Handling
3
Scanned Area of a Document
The shaded area in the illustration below shows the scanned area of a document. 
Make sure your documents text and graphics are within this area.
MAX. 1/8 (3 mm) MAX. 
7/32 (5.5 mm)
MAX. 7/32 (5.5 mm)
LT R
MAX. 1/8 (3 mm)
Scanning
direction
LD_Basic_US.book  Page 2  Monday, January 10, 2005  1:27 PM 

Placing a Document on the Platen Glass3-3
Document Handling
3
Placing a Document on the Platen Glass
1Open the platen glass cover.
2Place your document face down on the platen glass. 
Use the paper size marks on the left side of the platen glass to position a document.
•If your document conforms to a standard paper size (e.g., LTR or A4), align the 
document between the appropriate paper size marks.
•If you do not know the size of your document, or if your document does not match 
any of the paper size...

Placing a Document on the Platen Glass3-4
Document Handling
3
The illustration below shows how to place an LTR-size document on the platen glass.
3Gently lower the platen glass cover.
The document is now ready for scanning.
LD_Basic_US.book  Page 4  Monday, January 10, 2005  1:27 PM 

CHAPTER
Before Printing4-1
4Printing from Your Computer
This chapter explains how to print the documents from your computer using the printer driver 
included in the CD-ROM.
Before Printing
Before printing, software must be installed in your computer.
•If not, please see the Set-Up Instructions or Chapter 1, Installation, in the 
Software Guide.
Check if the machine is selected as the default printer.
•You can check if your machine is set as the default printer when you open the 
[Print] dialog box in an...

Before Printing4-2
Printing from Your Computer
4
2Click the corresponding printer driver icon.
3From the [File] menu, click [Set as Default Printer] (Windows 98/
Me: [Set as Default]).
LD_Basic_US.book  Page 2  Monday, January 10, 2005  1:27 PM