Canon printer imageCLASS MF247dw User Manual
Here you can view all the pages of manual Canon printer imageCLASS MF247dw User Manual. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 361
![Page 361
4Click [Add] [Finish].5Click [Close].
ChangingtheporttypeornumberIf the printing protocols (
Con4gurLng PrintingProtocolsandWSDFunctions(P.348) ) or port numbers
(
ChangingPortNumbers(P.409) ) have been changed on the machine, the corresponding settings on
the computer must also be con4gured. This change is only available for LPR or RAW ports.
1Click >Con4gure Port].2Click the [LPR] or [RAW] radio button in [Protocol Type], change the number in the [Port Number] text box
as...](http://img.usermanuals.tech/thumb/14/970/w300_printer-imageclass-mf247dw-1478271361_d-360.png "Page 361
4Click [Add] [Finish].5Click [Close].
ChangingtheporttypeornumberIf the printing protocols (
Con4gurLng PrintingProtocolsandWSDFunctions(P.348) ) or port numbers
(
ChangingPortNumbers(P.409) ) have been changed on the machine, the corresponding settings on
the computer must also be con4gured. This change is only available for LPR or RAW ports.
1Click >Con4gure Port].2Click the [LPR] or [RAW] radio button in [Protocol Type], change the number in the [Port Number] text box
as...")
4Click [Add] [Finish].5Click [Close]. ChangingtheporttypeornumberIf the printing protocols ( Con4gurLng PrintingProtocolsandWSDFunctions(P.348) ) or port numbers ( ChangingPortNumbers(P.409) ) have been changed on the machine, the corresponding settings on the computer must also be con4gured. This change is only available for LPR or RAW ports. 1Click >Con4gure Port].2Click the [LPR] or [RAW] radio button in [Protocol Type], change the number in the [Port Number] text box as...
Page 362
SettingUpPrintServer 1469-06R With a print server, you can reduce the load on the computer that you print from. The print server also enables each computer to install MF Drivers over the network, which saves you the trouble of installing the drivers on each computer by using the provided DVD-ROM. To set up a computer on the network as a print server, con4gure the settings for sharing the printer. To perform the following procedure, log on to your computer with an administrator account. You may...
Page 363
![Page 363
When[ChangeSharingOptions@isdisplayed
Click [Change Sharing Options]. If the [User Account Control] dialog box appears, click [Yes] (or [Continue]).
4Installadditionaldriversasnecessary.
This operation is required if you want to install MF Drivers in other computers running a different bit
architecture via the print server.
1Click [Additional Drivers].2Select the check box for the bit architecture that other computers are running, and click [OK].
Select additional drivers from the...](http://img.usermanuals.tech/thumb/14/970/w300_printer-imageclass-mf247dw-1478271361_d-362.png "Page 363
When[ChangeSharingOptions@isdisplayed
Click [Change Sharing Options]. If the [User Account Control] dialog box appears, click [Yes] (or [Continue]).
4Installadditionaldriversasnecessary.
This operation is required if you want to install MF Drivers in other computers running a different bit
architecture via the print server.
1Click [Additional Drivers].2Select the check box for the bit architecture that other computers are running, and click [OK].
Select additional drivers from the...")
When[ChangeSharingOptions@isdisplayed Click [Change Sharing Options]. If the [User Account Control] dialog box appears, click [Yes] (or [Continue]). 4Installadditionaldriversasnecessary. This operation is required if you want to install MF Drivers in other computers running a different bit architecture via the print server. 1Click [Additional Drivers].2Select the check box for the bit architecture that other computers are running, and click [OK]. Select additional drivers from the...
Page 364
![Page 364
Print serverSelect the check box for32-bit operating systems[x64]64-bit operating systems[x86] under [Processor]
If you do not know whether your Windows Vista/7/8/10/Server 2008/Server 2012 is a 32-bit or 64-bit
operating system, see
CheckingtheBitArchitecture(P.672) .
3Insert the provided DVD-ROM into the drive on the computer, click [Browse] to specify the folder that
contains MF Drivers, and then click [OK].
* Specify the folder for your language in [xxxx].
If the print server runs a 32-bit...](http://img.usermanuals.tech/thumb/14/970/w300_printer-imageclass-mf247dw-1478271361_d-363.png "Page 364
Print serverSelect the check box for32-bit operating systems[x64]64-bit operating systems[x86] under [Processor]
If you do not know whether your Windows Vista/7/8/10/Server 2008/Server 2012 is a 32-bit or 64-bit
operating system, see
CheckingtheBitArchitecture(P.672) .
3Insert the provided DVD-ROM into the drive on the computer, click [Browse] to specify the folder that
contains MF Drivers, and then click [OK].
* Specify the folder for your language in [xxxx].
If the print server runs a 32-bit...")
Print serverSelect the check box for32-bit operating systems[x64]64-bit operating systems[x86] under [Processor] If you do not know whether your Windows Vista/7/8/10/Server 2008/Server 2012 is a 32-bit or 64-bit operating system, see CheckingtheBitArchitecture(P.672) . 3Insert the provided DVD-ROM into the drive on the computer, click [Browse] to specify the folder that contains MF Drivers, and then click [OK]. * Specify the folder for your language in [xxxx]. If the print server runs a 32-bit...
Page 365
Con4gurLngScanSettings(E-Mail/SharedFolders) 1469-06S To send scanned originals directly by e-mail or save them to shared folders, you need to con4gure the network. The Send Function Setting Tool, an application that is included with the machine, will assist you with the required setup. Set the necessary con4guration depending on your purpose and network environment. ScanningtoE-Mail Con4gurLng ScanSettings(SendingE-Mail)(P.358) ScanningtoSharedFolders Con4gurLng...
Page 366
Con4gurLngScanSettings(SendingE-Mail) 1469-06U Before con4guring the machine for scanning to e-mail, check the setup 5ow shown below. Makesurethatthemachineandthecomputerarecorrectlyconnected. ConnectingtoaWirelessLAN(MF249dw/MF247dw)(P.319) ConnectingtoaWiredLAN(P.318) Makesurethatyouhavethefollowinginformation: The IP address of the machine. ViewingNetworkSettings(P.344) An e-mail address to be registered as a destination. Information about the...
Page 367
Con4gurLngBasicE-MailSettings 1469-06W This section describes how to con4gure the e-mail settings by using the Send Function Setting Tool. With the Send Function Setting Tool, you can also register e-mail addresses to the Address Book. The Send Function Setting Tool helps you con4gure the basic settings for sending e-mails. Instead of the Send Function Setting Tool, you can use the Remote UI to con4gure more detailed settings such as the settings for POP authentication before sending or for...
Page 368
![Page 368
If [AutoPlay] is displayed, click [Run MInst.exe].3Click [Start] for [Send Function Setting Tool].4Click [Next].
If you want to view "Send Setting Guide," click [How to Set].
Ifthescreenbelowappears
Click [Yes].
5Select the machine from [Device List] and click [Next].
Ifthemachineisnotdisplayedin[DeviceList@
Click [Search Again]. If the problem persists, click [Search by IP Address], enter the IP address of the
machine, and then click [OK].
6Con4rm the settings and click...](http://img.usermanuals.tech/thumb/14/970/w300_printer-imageclass-mf247dw-1478271361_d-367.png "Page 368
If [AutoPlay] is displayed, click [Run MInst.exe].3Click [Start] for [Send Function Setting Tool].4Click [Next].
If you want to view \"Send Setting Guide,\" click [How to Set].
Ifthescreenbelowappears
Click [Yes].
5Select the machine from [Device List] and click [Next].
Ifthemachineisnotdisplayedin[DeviceList@
Click [Search Again]. If the problem persists, click [Search by IP Address], enter the IP address of the
machine, and then click [OK].
6Con4rm the settings and click...")
If [AutoPlay] is displayed, click [Run MInst.exe].3Click [Start] for [Send Function Setting Tool].4Click [Next]. If you want to view "Send Setting Guide," click [How to Set]. Ifthescreenbelowappears Click [Yes]. 5Select the machine from [Device List] and click [Next]. Ifthemachineisnotdisplayedin[DeviceList@ Click [Search Again]. If the problem persists, click [Search by IP Address], enter the IP address of the machine, and then click [OK]. 6Con4rm the settings and click...
Page 369
![Page 369
If the logon screen is displayed, enter the appropriate PIN, and click [Logon].
3Click[SendtoE-mailSettings@.
If the screen prompting you to enter the Address Book PIN is displayed, enter the PIN for the Address Book,
and click [OK].
SettingaPINforAddressBook(P.415)
4Specifytherequiredsettings.
[Registration@
[One-touchSpeedDialNumber@With the Send Function Setting Tool, you can register an e-mail address into in the Address Book. Select a number from the drop-down list.
Network...](http://img.usermanuals.tech/thumb/14/970/w300_printer-imageclass-mf247dw-1478271361_d-368.png "Page 369
If the logon screen is displayed, enter the appropriate PIN, and click [Logon].
3Click[SendtoE-mailSettings@.
If the screen prompting you to enter the Address Book PIN is displayed, enter the PIN for the Address Book,
and click [OK].
SettingaPINforAddressBook(P.415)
4Specifytherequiredsettings.
[Registration@
[One-touchSpeedDialNumber@With the Send Function Setting Tool, you can register an e-mail address into in the Address Book. Select a number from the drop-down list.
Network...")
If the logon screen is displayed, enter the appropriate PIN, and click [Logon]. 3Click[SendtoE-mailSettings@. If the screen prompting you to enter the Address Book PIN is displayed, enter the PIN for the Address Book, and click [OK]. SettingaPINforAddressBook(P.415) 4Specifytherequiredsettings. [Registration@ [One-touchSpeedDialNumber@With the Send Function Setting Tool, you can register an e-mail address into in the Address Book. Select a number from the drop-down list. Network...
Page 370
![Page 370
[NameforOne-touchSpeedDialNumber@
Enter the name for identifying the destination to be registered. Set a name that will be easy for you to 4nd later in the Address Book.
[SendDestinationSettings@
[DestinationE-mailAddress@Enter the e-mail address that you want to send your scanned documents to.
[SMTPServerSettings@
[SMTPServer@
Enter the SMTP server name.
[SMTPAuthentication@
Click the [Not Set] or [Set] radio button to match the authentication settings of the SMTP server. When [Set] is...](http://img.usermanuals.tech/thumb/14/970/w300_printer-imageclass-mf247dw-1478271361_d-369.png "Page 370
[NameforOne-touchSpeedDialNumber@
Enter the name for identifying the destination to be registered. Set a name that will be easy for you to 4nd later in the Address Book.
[SendDestinationSettings@
[DestinationE-mailAddress@Enter the e-mail address that you want to send your scanned documents to.
[SMTPServerSettings@
[SMTPServer@
Enter the SMTP server name.
[SMTPAuthentication@
Click the [Not Set] or [Set] radio button to match the authentication settings of the SMTP server. When [Set] is...")
[NameforOne-touchSpeedDialNumber@ Enter the name for identifying the destination to be registered. Set a name that will be easy for you to 4nd later in the Address Book. [SendDestinationSettings@ [DestinationE-mailAddress@Enter the e-mail address that you want to send your scanned documents to. [SMTPServerSettings@ [SMTPServer@ Enter the SMTP server name. [SMTPAuthentication@ Click the [Not Set] or [Set] radio button to match the authentication settings of the SMTP server. When [Set] is...