Canon printer imageCLASS MF247dw User Manual

SendingDocumentsasE-MailsDirectlyfromtheMachine(P.246)
SavingDocumentsDirectlyinSharedFolder(P.253)Using the Machine as a Scanner
263       

AdjustingDensity
1469-050
 You can adjust the density of the scan if the text or images in a document are too
light or dark.
  Specify a destination with /    Adjust the density  

Decreases the density.

Increases the density.
LINKS
SendingDocumentsasE-MailsDirectlyfromtheMachine(P.246)
SavingDocumentsDirectlyinSharedFolder(P.253)
AdjustingSharpness(P.268)
Using the Machine as a Scanner
264          

SpecifyingOrientationofYourDocument
1469-051
 You can specify portrait or landscape orientation.
  Specify a destination with /    Select the
document type

Select for documents with portrait orientation.

Select for documents with landscape orientation.
LINKS
SendingDocumentsasE-MailsDirectlyfromtheMachine(P.246)
SavingDocumentsDirectlyinSharedFolder(P.253)
Using the Machine as a Scanner
265       

SelectingDocumentType
1469-052
 You can select the image quality for the scan depending on the document type, such
as text-only documents, documents with charts and graphs, or magazine photos.
  Specify a destination with /    Select the document type

Suitable when scanning documents that only contain text.

Suitable when scanning documents that contain both text and photos.

Suitable when scanning documents that contain printed photos, such as magazines or pamphlets.
LINKS...

Scanning2-SidedDocuments
1469-053
 The machine can automatically scan the front and back sides of documents in the
feeder.	 The machine cannot scan both sides of documents automatically when the documents are placed on the
platen glass.
  Specify a destination with /    Select  or


Select for documents whose images on the front and back sides face the same direction.

Select for documents whose images on the front and back sides face in opposite directions.
LINKS...

AdjustingSharpness
1469-054
 You can adjust the sharpness of the image. Increase the sharpness to sharpenblurred text and lines, or decrease the sharpness to improve the appearance ofmagazine photos.
  Specify a destination with /    Adjust the sharpness 


Decreases the sharpness, resulting in a softer image.
Example:  If you want to improve the appearance of magazine photos

Increases the image sharpness.
Example:  If you want to sharpen text and lines written in pencil
Using the Machine as a Scanner...

LINKS
SendingDocumentsasE-MailsDirectlyfromtheMachine(P.246)
SavingDocumentsDirectlyinSharedFolder(P.253)
AdjustingDensity(P.264)
Using the Machine as a Scanner
269          

AdjustingBalancebetweenFileSizeandImageQuality
1469-055
 You can specify the 4le compression ratio when converting scanned documents into
the JPEG format.  makes the compression ratio higher than normal to create smaller  4les with lower image quality. On the other hand,  makes the compression ratio lower than normal larger  4les
with higher image quality.
  Specify a destination with /    Specify the setting

The data size is highly compressed and reduced, but the image quality becomes low....

SettingGammaValues
1469-056
 The scanned documents are converted into the speci4ed 4le  formats. At that time,
you can specify the gamma values to apply to the documents. You can specify the
same gamma value as that of the monitor which is to be used for viewing the
converted  4les so the  4les are displayed with brightness true to the original
documents.	 For the gamma value of a monitor display, see the instruction manual included with the display.
        Select
the gamma value
LINKS...

SendingUsingRegisteredDestinations(E-Mail/SharedFolder)
1469-057
You can specify destinations by selecting from the Address Book as well as by using the numeric keys. To use the Address Book, you need to register destinations in the Address Book beforehand. You can also specify previously useddestinations.
SpecifyingfromAddress
Book(P.273)SelectingDestinationsDirectly
byEnteringCodedDial
Numbers(P.276)SpecifyingDestinationswiththe
One-TouchButtons(P.279)SpecifyingPreviouslyUsed...